Implementasi Sistem Data Logger pada Alat Pemantau Energi Listrik Motor Induksi 3-Fasa Berbasis Arduino Mega 2560 di PT Madu Baru Yogyakarta

Abstract

An Induction motor is an electric machine that converts electrical energy into kinetics energy and widely used in the industrial fields. Many disturbances that occur in the motor that cause production to be not optimal as for the problems that occur at PT. Madu Baru Yogyakarta is when there is a disturbance in the three-phase induction motor, workers still use manual methods to analyze the disturbance, so that the time used in the analysis takes a long time even the three-phase induction motor cannot work again. In overcoming this, it is necessary to implement a data logger system that can detect the electrical parameters of a three-phase induction motor in real time, in order to make it easier to analyze existing disturbances through graphs. The voltage sensor CYVS13-34U0 and current sensor SCT-019 will detect the electrical parameters which will then be processed by the Arduino Mega 2560 pro so that the processed data will be stored on the microsd card. The data resulting from the processing are electrical parameters in the form of voltage, current, apparent power, real power, reactive power, and power factor. The data will be saved as a file with .txt format which has an interval of about 1 minute for each storage.

Keywords

Data logger, Microsd card, Induction Motor, Voltage Sensor CYVS13-34U0

Full Text:

PDF

References

Harahap, P. (2016). Pengaruh Jatuh Tegangan Terhadap Kerja Motor Induksi Tiga Fasa Menggunakan Simulink Matlab. Media Elektrika, 9(2).

Sadikin, M., Maulana, A., & Baihaqi, M. M. (2018). Pemeliharaan Dan Pengujian Motor Induksi 3 Phasa Menggunakan Motor Circuit Analysis (MCA) Di PT. DIAN SWASTIKA SENTOSA. Teknika: Jurnal Sains dan Teknologi, 14(1), 47-52.

Khosyi’in, M., Nugroho, A. A., & Yulistiyanto, A. (2019, December). Three-Phase Power Data Logger Using IEM 3255 Schneider Module Based On Internet Of Things (IOT). In Conference SENATIK STT Adisutjipto Yogyakarta (Vol. 5, pp. 263-274).

Fartino, N., Tarmizi, T., & Syukri, M. (2020). Kajian Perancangan Alat Perbaikan Faktor Daya Otomatis. Jurnal Komputer, Informasi Teknologi, dan Elektro, 5(1).

Iskandar, H. R., Juniarto, E., & Heryana, N. (2018). Sistem Monitoring dan Data Logging Motor Induksi 3 Fasa Berbasis Jaringan Sensor Nirkabel Menggunakan Blynk Cloud Server. Jurnal Teknik, 17(2), 94-101.

Badruzzaman, Y. (2012). Real Time Monitoring Data Besaran Listrik Gedung Laboratorium Teknik Sipil Politeknik Negeri Semarang. JTET (Jurnal Teknik Elektro Terapan), 1(2).

Mnati, M. J., Van den Bossche, A., & Chisab, R. F. (2017). A smart voltage and current monitoring system for three phase inverters using an android smartphone application. Sensors, 17(4), 872.

Adam, A., & Amri, H. (2019). Prototype Monitoring Arus Dan Tegangan Menggunakan Sms Gateway. Multitek Indonesia, 13(1), 16-23.

Nanda, F. W., Kurniawan, F., & Setiawan, P. (2020). Analisis Ketepatan Pengukur Tegangan True RMS Jala-Jala Listrik Berbasis Mikrokontroler ATmega 328P. AVITEC, 2(2), 111-128.

Winata, P. P. T., Wijaya, I. W. A., & Suartika, I. M. (2016). Rancang bangun sistem monitoring output dan pencatatan data pada panel surya berbasis mikrokontroler arduino. E-Journal Spektrum, 3(1).

Badan Standarisasi Nasional. (2003). Tegangan Standar. Standar Perusahaan Listrik Negara, 391, 5.

http://dx.doi.org/10.28989/avitec.v4i1.1189

Article Metrics

Abstract view: 258 times
Download     : 204   times

This work is licensed under a Creative Commons Attribution 4.0 International License.

Tweet

Refbacks

• There are currently no refbacks.