HSOA Journal of Nanotechnology: Nanomedicine & Nanobiotechnology Perspective of Applying Adaptive Neuro Fuzzy Inference System (ANFIS) in Laser Cladding of Graphene-Metal Alloys

Laser powder deposition is a potential nontraditional coating process which includes several of parameters that affect coating performance. Obtaining optimal parameters associated with better efficiency is substantial. Hence, it is proposed that using Adaptive Neuro-Fuzzy Inference System (ANFIS) can predict performance of graphene-metal alloys recently in order to reduce manufacturing process which increases the production efficiency and accuracy. In addition, according to many researches, graphene known as the worlds strongest known material that can improve nanotechnology products.

The ultimate goal to study the laser cladding of Graphene/metal alloys is to optimize the process in terms of single/multiple objectives [4,5]. Optimization can be defined as mathematically or statistically modeling the laser cladding process to optimize (to obtain the optimum) response based on the process parameters. Various modeling and optimization algorithms are used to optimize the said parameters. Artificial intelligence is a potentially strong technique to model the laser cladding process [6]. This modeling approach was applied to laser cladding of Graphene/metal alloys i.e., Graphene/graphene PVA film [4]. Optimization can be performed for single or multiple response parameters.
Previously, some researchers used ANN (Artificial Neural Networks) for prediction of their experimental works. For instance, Petković et al., employed ANN in order to estimate the wind speed fluctuation based on the fractal interpolation [7]. In addition, they used ANFIS for designing and adaption of prediction of optimal power coefficient value of the wind turbines [8]. Moreover, they applied neuro-fuzzy approach to detect the most important variables which affect the wind speed according to the fractal dimensions [9]. Finally, they used ANFIS for prediction of how five parameters can effect on outputs the ANFIS network was performed to determine how the five parameters affect the wake wind speed [10]. In another article they adapted to estimate wind farm efficiency according to turbines number in wind farm [11]. Furthermore, Khademi et al., applied ANN, ANFIS and regression for prediction of strength of recycled aggregate concrete [12]. They are concluded that ANN and ANFIS are better in mix design optimization and in the case of higher accuracy requirements. After that, they used same models for prediction of 28 days compressive strength of concrete [13]. The results were similar in the case of using these models, when higher accuracy is needed, the ANN and ANFIS models are proposed.

Adaptive Neuro-Fuzzy Inference System
Artificial neural network which can be identified as the data processing systems, are algorithms simulating the functioning of the biologic neurons. An Adaptive Neuro-Fuzzy Inference System (ANFIS) is a hybrid predictive model which uses both of neural network and fuzzy logic to generate mapping relationship between inputs and out puts [6]. The structure of this model consists of five layers in which each layer is constructed by several nodes. As in a neural network, in an ANFIS structure the inputs of each layer are gained by the nodes from pervious layer. Figure 1b describes an ANFIS structure. It can be inferred from figure 1b that the network includes m inputs (X 1 … X m ), which each one consists of n Membership Functions (MFs). Moreover, a layer with R fuzzy rules and also an output layers are contributed to construction of this model. Number of nodes in first layer can be calculated as the product of m as number of inputs and n as number MFs (N=m.n). The number of nodes in other layers (layer 2-4) relates to number of fuzzy rules (R).The layers of an ANFIS model can be summarized as follows:

First layer: Fuzzification layer
In this layer crisp inputs transforms to linguistic type A ij (such as bad, middle, good) by using membership functions. The output of this layer can be expressed as: (1) Where μ ij is the j th membership function for the input X i . Several types of MFs are used, for example, triangular, trapezoidal and generalized bell function. In this study, the Triangular and Gaussian functions were selected for ultimate tensile strength and elongation respectively. The mathematical equations for Triangular and Gaussian type of membership function are expressed as equations 2 and 3 respectively: Where a and b vary the width of the curve and c locates the center of the curve. The parameter b should be positive. These parameters are named as premise parameters. The Root Mean Square Error (RMSE) function is applied to this network for inspection of trained model performances. It can be calculated by following equation: Where, M is the total number of training sample, S z is the real output value, and Y z is the ANFIS output value in training [6].
In order to correlate the relationship between input parameters and responses, this model has been employed. The first step is to identify the input (e.g., laser power, powder feeding rate, carrier gas flow rate, etc). And output (e.g., catchment efficiency and clad height or weight) parameters of the process. These parameters can be either quantitative or qualitative depending on the research objectives. To this end, researchers rely on either experimental or simulation works (or a combination of both) to optimize the laser cladding process.
Laser cladding has a great potential to benefit these cutting-edge technologies, as laser deposition techniques can provide a revolutionary technique for making micro structure fabrication. Optomec Inc., is a company in the USA, has advanced a new process for making micro coating on substrates which is in the range of 10 to 50μm.
The laser cladding process has drawn great attention both from researchers and users. Consequently with the advent of artificial intelligent system especially ANFIS. We strongly believe that optimizing the laser cladding process for hybrid alloys of graphene/metallic material will significantly improve the characterization of response parameters. Moreover, ANFIS model can be applied to generate mapping relationship between process factors and responses. Also, it will estimate the output parameters with maximum accuracy. In other words, the main advantages of the ANFIS scheme are: computationally efficient, well-adaptable with optimization and adaptive techniques. To use the effect of input parameters on the outputs, MAT-LAB (ANFIS toolbox) can be used. Furthermore, the effect of process factors (processing inputs) on the outputs can be studied through plots derived out of models developed in ANFIS simulation.