材料
Online ISSN : 1880-7488
Print ISSN : 0514-5163
ISSN-L : 0514-5163
ポリ(アルコキシメチルアクリルアミド)の接着表面処理剤への応用
白石 浩平松田 尚大橋 俊彦好満 芳邦杉山 一男
著者情報
ジャーナル フリー

2003 年 52 巻 3 号 p. 319-324

詳細
抄録

Two series of copolymers, Poly (RAAm-co-ST) and Poly (BMAAm-co-R'MA), as the novel primers in adhesive bonding polypropylene (PP) were prepared by radical copolymerization of alkoxymethyl acrylamide (RAAm) and styrene (ST) or alkyl methacrylate (R'MA). Alkoxy groups (OR) in the RAAm moieties used were methoxy, ethoxy, isobutoxy and butoxy, whereas alkyl groups (R') in the R'MA moieties were methyl, ethyl, isopropyl, isobutyl, n-butyl and n-hexyl. Homopolymer of RAAm, Poly (RAAm), was also prepared and characterized: the glass transition temperature of Poly (RAAm) was Tg=76.8-70.0°C and Poly (RAAm) was thermally decomposed through a two step degradation with the evolution of corresponding alcohol. The bonding properties of PP, using two series of copolymers as primers, were studied by measuring the shear strength (τ) of single-lap joints between PP and PP or other substrates such as polyethyleneterephthalate (PET), nylon 66 (66N), alminium, steel and glass. The primers tested were effective when used with polyurethane adhesive. Mixed substrate bonds prepared between PP and others gave substantial bond strength (τ=48.4-51.3MPa) in comparison to bond strength for unprimered controls (τ=8.9-16.7MPa). Maximum bond strength was obtained when Poly (BMAAm-co-HMA) was chosen as a primer. The mechanism for the adhesive bonding of PP was discussed.

著者関連情報
© 日本材料学会
前の記事 次の記事
feedback
Top