Details
Title
Evaluation of High Pressure Die Casting Mold Temperature Relations Depending on the Location of the Tempering ChannelsJournal title
Archives of Foundry EngineeringYearbook
2024Volume
vol. 24Issue
No 1Affiliation
Majerník, J. : Institute of Technology and Business in České Budějovice, Czech Republic ; Podaril, M. : Institute of Technology and Business in České Budějovice, Czech Republic ; Majernikova, M. : Institute of Technology and Business in České Budějovice, Czech RepublicAuthors
Keywords
Product development ; Application of information technology to the foundry industry ; Thermal stress ; Mold material ; TemperingDivisions of PAS
Nauki TechniczneCoverage
115-120Publisher
The Katowice Branch of the Polish Academy of SciencesBibliography
[1] Ebrahimi, A., Fritsching, U., Heuser, M., Lehmhus, D., Struß, A., Toenjes, A., von Hehl, A. (2020). A digital twin approach to predict and compensate distortion in a High Pressure Die Casting (HPDC) process chain. In Proceedings of the 5th International Conference on System-Integrated Intelligence, 11-13 November 2020 (pp. 144-149). Bremen: Elsevier B.V. DOI: 10.1016/j.promfg.2020.11.026.[2] Bi, C., Gou, Z. & Xiong, S. (2015). Modeling and simulation for die casting mould filling process using cartesian cut cell approach. International Journal of Cast Metals Research. 28(4), 234-241. DOI: 10.1179/1743133615Y.0000000006.
[3] Choi, J., et al. (2022). Fatigue life prediction methodology of hot work tool steel dies for high-pressure die casting based on thermal stress analysis. Metals. 12(10), 1744, 1-18. DOI: 10.3390/met12101744.
[4] Cao, H., Shen, C., Wang, C., Xu, H. & Zhu, J. (2019). Direct observation of filling process and porosity prediction in high pressure die casting. Materials. 12(7), 1099, 1-19. DOI: 10.3390/ma12071099.
[5] Yu, W., Liang, S., Cao, Y.Y., Li, X.B., Guo, Z.P. & Xiong, S.M. (2017). Interfacial heat transfer behavior at metal/die in finger-plated casting during high pressure die casting process. China Foundry. 14(4), 258-264. DOI: 10.1007/s41230-017-6066-6.
[6] Jiao, X., Liu, C., Wang, J., Guo, Z., Wang, J., Wang, Z., Guo, J. & Xiong, S. (2020). On the characterization of microstructure and fracture in a high-pressure die-casting Al-10 wt%Si alloy. Progress in Natural Science: Materials International. 30(2), 221-228. DOI: 10.1016/j.pnsc.2019.04.008.
[7] Iwata, Y., Dong, S., Sugiyama, Y. & Iwahori, H. (2014). Change in molten metal pressure and its effect on defects of aluminum alloy die castings. Materials Transactions. 55(2), 311-317. DOI: 10.2320/matertrans.F-M2013838.
[8] Majernik, J. & Podaril. M. (2019). Evaluation of the temperature distribution of a die casting mold of X38CrMoV5_1 steel. Archives of Foundry Engineering. 19(2), 107-112. DOI: 10.24425/afe.2019.127125.
[9] Ružbarský, J., Paško, J., & Gašpár, Š. (2014). Technigques of Die Casting. Lüdenscheid: RAM-Verlag.
[10] Trytek, A. Orłowicz, A.W., Tupaj, M., Mróz, M., Markowska, O., Bąk, G. & Abram, T. (2016) The effect of a thin-wall casting mould cavity filling conditions on the casting surface quality. Archives of Foundry Engineering. 16(4), 222-226. DOI: 10.1515/afe-2016-0113.
[11] Gašpár, Š., Paško, J., & Majerník, J. (2017). Infuence of Structure Adjustment of Gating System of Casting Mould upon the Quality of Die Cast. Lüdenscheid: RAM-Verlag.
[12] Noga, P., Tuz, L., Żaba, K. & Zwoliński, A. (2021). Analysis of microstructure and mechanical properties of alsi11 after chip recycling, co-extrusion, and arc welding. Materials. 14(11), 3124, 1-22. DOI: 10.3390/ma14113124.
[13] Majernik, J. Gaspar, S., Podaril, M. & Coranic, T. (2020). Evaluation of thermal conditions at cast-die casting mold interface. MM Science Journal. 2020(November), 4112-4118. DOI: 10.17973/MMSJ.2020_11_2020041.
[14] Karková, M., Majerník, J. & Kmec, J. (2017). Analysis of influencing the macrostrukture and hardness of casting surface layer by changing conditions of crystallization. MM Science Journal. 1910-1913. DOI: 10.17973/MMSJ.2017_12_201720.
[15] Gašpár, Š., Pasko, J., Malik, J., Panda, A., Jurko, J. & Maseenik, J. (2012). Dependence of pressure die casting quality on die casting plunger velocity inside a filling chamber of a pressure die casting machine. Advanced Science Letters. 14(1), 499-502. DOI: 10.1166/asl.2012.3989.