نوع مقاله : مقاله پژوهشی
نویسندگان
1 پژوهشکدهی پلاسما و گداخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی، صندوق پستی: 51113-14399، تهران- ایران
2 گروه فیزیک، دانشکدهی علوم پایه، دانشگاه تربیت مدرس، صندوق پستی: 175-14115، تهران ـ ایران
چکیده
یکی از رایجترین روشهای شتابدهی پروتون، روش شتابدهی از غلاف پشت هدف (TNSA) میباشد. استفاده از یک لایه فوم در جلوی هدف اصلی نقش به سزایی در میزان جذب انرژی لیزر توسط الکترونها و به تبع آن شتابدهی پروتون ایفا میکند. این لایه میتواند با چگالی یکنواخت و همگن و یا با چگالی موضعی در یک ساختار نانو باشد. در این پژوهش با فرض بهکارگیری لایه فوم با ساختار نانو و با استفاده از شبیهسازیهای دو بعدی ذرهای، به مطالعه اثر اندازه نانوذرات پیشلایه در انرژی نهایی پروتون پرداخته میشود. ذرات با شعاعهای 10، 60 و 120 نانومتر و نیز با اندازههای تصادفی در بازه 10 تا 120 نانومتر در هدف با لایه فومی در دو ضخامت 10 و 20 میکرومتر و با چگالی میانگین نزدیک بحرانی در شدت لیزری 10 = a (معادل 2W/cm 1020≈I) مطالعه و شبیهسازی شدهاند. مطابق با نتایج بهدست آمده در هدف با ضخامت 10 میکرومتر اختلاف بیشینه انرژی جمعیت الکترونی و در نتیجه پروتونها ناچیز و قابل صرفنظر کردن است. هر چند با افزایش ضخامت هدف، تغییر اندازه شعاع نانوذرات تأثیر قابل توجهی در انرژی نهایی طیف پروتون میگذارد. به طوری که با کوچککردن اندازه شعاع نانوذرات از 120 نانومتر به 10 نانومتر افزایش حدود %45 در بیشینه انرژی پروتون مشاهده میشود.
کلیدواژهها
عنوان مقاله [English]
Target Nano-particles size effect on the laser proton acceleration in the TNSA mechanism
نویسندگان [English]
- M.J. Jafari 1
- E. Yazdani 2
- S. Rezaei 1
1 Plasma and Nuclear Fusion Research School, Nuclear Science and Technology Research Institute, AEOI, P.O. Box: 14399-51113, Tehran, Iran
2 Department of Physics, Faculty of Basic Sciences, Tarbiat Modares University, P.O.Box: 14115-175, Tehran - Iran
چکیده [English]
One of the most common laser proton acceleration mechanism is Target Normal Sheath Acceleration (TNSA) method. The use of a foam layer in front of the main target plays an important role in the amount of laser energy absorption by the electrons and consequently the acceleration of the proton. The front layer can be either uniform and homogeneous or nano-structured. In this study, by assuming a nanostructured foam layer, and using two-dimensional particle simulations code, the effect of nanoparticle’s radius on the proton cut-off energy is investigated. Particles with radii of 10, 60 and 120 nm and random sizes in the range of 10 to 120 nm have been studied and simulated in a front layer with thickness of 10 and 20 μm with near-critical average density at laser intensity (I≈1020W/cm2). According to the results, in the case of thin foam layer, the differences of electron and consequently proton spectra are negligible. However, by increasing the foam thickness, the influence of nanoparticle radius causes a further dissociation in the final proton energy spectra. So that, the proton energy increases almost 45% by reducing the nanoparticle size from 120 nm to 10 nm.
کلیدواژهها [English]
- TNSA
- Laser proton acceleration
- Nano-structured target
- Nano particle size