Date of Award

1991

Degree Type

Dissertation

Degree Name

Doctor of Philosophy in Oceanography

Department

Oceanography

First Advisor

Robert A. Duce

Abstract

The physical chemistry of atmospheric iron present in remote marine aerosols collected from over the North Pacific has been systematically studied. 90- 100% of iron present in remote marine aerosols is in the non-aluminosilicate form. The Fe(II) concentrations in remote marine aerosols has been determined for the first time, and more than 50% of the iron is present as Fe(II). Photochemical reduction, including sulfur or organic reductants, and the subsequent dissolution of iron are probably the dominant transformation mechanisms affecting atmospheric iron during its long range transport from Asia to the North Pacific. It is postulated that the key reaction to produce Fe(II) and to increase the solubility of iron in marine aerosols is [Fe(III)(OH)(H2O)5]2+ +H2O + hv ----> [Fe(II)(H2O)6]2+ + OH  or Fe(III) + S(IV) + hv -----> Fe(II)aq +

The "saturated concentration" of operationally defined (using a 0.4-μm filter) dissolved atmospheric iron in seawater was found to be ~10-17 nmol/kg (~5-8 nmol/kg if 0.05-μm Millipore filters were used). If the total iron concentration was less than 2 nmol/kg (the open Pacific Ocean is in this category), ~50% of the atmospheric iron dissolved in seawater. More than 99% of the dissolved iron in the surface waters of the central North Pacific is provided by atmospheric input. The annual input of atmospheric iron to the central North Pacific is ~8 x 1011 g/yr and to the entire North Pacific is ~15 x 1012 g/yr. The dissolved iron and particulate iron from atmospheric input to the world ocean is estimated to be ~16 x 1012 and ~16 x 1012 g/yr respectively compared with the dissolved iron and particulate iron from the global riverine input to the world ocean of ~l x 1012 g/yr and ~110 x 1012 g/yr respectively [GESAMP, 1989]. Adsorption and biomass uptake are responsible for controlling the iron concentration in seawater. Although adsorption is one of the predominant mechanisms responsible for controlling the dissolved iron in the open ocean, the addition of the mineral aerosols to the open ocean still results in the dissolution of atmospheric iron in seawater.

Atmospheric iron present in remote marine aerosols may be involved in two important atmospheric processes: 1) its long range transport to the open ocean provides a critical micronutrient for organisms in the surface waters of the open ocean, and iron may be the limiting nutrient in some oceanic areas, and 2) reduction of atmospheric Fe(III) may be a major source of the key radical OH⋅ in solution, and it may be involved in the sulfur/climate feedback loop via Fe(III) photoreduction to Fe(II). Furthermore, there are two positive feedback loops for the production of Fe(II) and OH⋅. More dust generates more Fe(III), which when reduced forms more OH⋅ and more Fe(II). Then 1) more Fe(II) may produce more DMS in seawater in some areas, and more DMS will result in more SO2 and SO4 = aerosols and 2) more OH⋅ may also result in the oxidation of sulfur species to produce more sulfate aerosols. Thus, more Fe(II) and more OH⋅ will be produced from the Fe(III) photoreduction, with S(IV) oxidized to S(VI). These positive feedback loops may be of importance for both climate considerations and primary biological productivity in some areas of the open ocean.

In addition, a new analytical method for the determination of Fe(II) by using HPLC with a UV/Visible detector has been developed. A detection limit of 0.1 nM was obtained.

Share

COinS
 
 

To view the content in your browser, please download Adobe Reader or, alternately,
you may Download the file to your hard drive.

NOTE: The latest versions of Adobe Reader do not support viewing PDF files within Firefox on Mac OS and if you are using a modern (Intel) Mac, there is no official plugin for viewing PDF files within the browser window.