Thermal Science 2023 Volume 27, Issue 2 Part A, Pages: 949-957
https://doi.org/10.2298/TSCI2302949W
Full text (
624 KB)
Cited by
Development of a new silicate thermal insulation coating and analysis of heat storage characteristics
Wei Chenghui (Chongqing Vocational College of Science and Creation, Chongqing, China), 1665309941@qq.com <
Chen Hao (Chongqing Vocational College of Science and Creation, Chongqing, China)
Wu Bin (Chongqing Huayu Group Co., Ltd.,Chongqing, China)
Non-shrinkage composite silicate insulation materials with raw materials easy
to obtain, low cost, low density, high insulation, special-shaped equipment
it is a new type of thermal insulation material with advantages of
convenient daub, no dust on site and almost zero shrinkage in the drying
process. Through the analysis of the raw materials and the production
process of the thermal insulation coating, a production method of the
thermal insulation coating with low raw material cost, easy to use, simple
production process and good product performance was determined. The
experimental results show that a layer of waterproof coating with
appropriate color can be brushed on the surface of the coating, which can
prolong the service life of the coating and beautify the environment. From
the use of this coating on the tower of Shenghua Refinery, the tower with a
surface temperature of 150ºC is coated with 22 mm thick thermal insulation
coating, and the surface temperature of the coating is 35 ºC. Due to the use
of the insulation coating, the heat consumption is reduced, and the
production efficiency and economic benefits are greatly improved.
Keywords: silicate, heat insulation coating, research and development, heat energy storage
Show references
Zhou, Z., et al., Preparation and Properties of Silicate Inorganic Exterior Wall Insulation Based on Thermal Energy Storage, Thermal Science, 24 (2020), 5B, pp. 3109-3118
Wendong, L. V., et al., Development of a New Aerogel Composite Thermal Insulation Coating, Materials Research and Application, 15 (2019), 7, 9
Xia, Z., Research and Development of Pew polypropylene-Water Glass Thermal Insulation Material and Its Performance Experimental Analysis, Shanghai Textile Science and Technology, 45 (2019), 6, pp. 77-79
Hirano, S., et al., Thermal Characteristics and Development of a Phase Change Material for Thermal Energy Storage Media as Thermo-Functional Fluids, Iron and Steel Institute of Japan, 5 (2020), 8, 64
Yuan, Z., et al., Development of Computer-Based Adhesive Wear-Resistant Coating in Fine Chemical Industry and Analysis of Its Wear Mechanism, Journal of Physics: Conference Series, 1744 (2021), 2, 022101
Meza, A. A., Thermal Analysis of a Parabolic trough Collectors System Coupled to an Organic Rankine Cycle and a Two-Tank Thermal Storage System: Case Study of Itajuba-Mg Brazil, Energies, 15 (2022), 7, pp. 56-59
Muzaffar, A., Hydrodynamic and Thermal Energy Characteristics of a Gravitational Water Vortex, Engineering Proceedings, 23 (2022), 4, pp. 47-49
Takahiro., et al., Development of Simple Method to Measure Thermal Conductivity of Thermal Insulations (in Japanese), Journal of the Society of Powder Technology, 56 (2019), 2, pp. 74-80
Yang, K., et al., Calculation and Analysis of Thermal Flow Field in Hydrodynamic Torque Converter with a New Developed Stress-Blended Eddy Simulation, International Journal of Numerical Methods for Heat and Fluid-Flow, Ahead-of-Print, 45 (2021), 6, pp. 36-37
Rohini, A., et al., A Review on Thermal Barrier Coating for Diesel Engine and Its Characteristics Studies, Journal of Physics: Conference Series, 1473 (2020), 1, 012039
Wang, Y., et al., Experimental Study on the Penetration Characteristics of Leaking Molten Salt in the Thermal Insulation Layer of Aluminum Silicate Fiber, Nuclear Science and Techniques, 32 (2021), 9, pp. 69-74
Jerman, M., et al., Thermal and Hygric Properties of Biomaterials Suitable for Interior Thermal Insulation Systems in Historical and Traditional Buildings, Building and Environment, 154 (2019), May, pp. 81-88
Xie, B., et al., Thermal Storage Characteristics and Composite Phase Change Materials of Silicate Minerals, Journal of the Chinese Ceramic Society, 57 (2019), 1, 33
Zhang, H., et al., Desing of Thermal Insulation Energy-Saving Coatings for Exterior Wall, Chemical Engineering Transactions, 61 (2017), Oct., pp. 1207-1212
Gautam, A., et al., A Review on Technical, Applications and Economic Aspect of Packed Bed Solar Thermal Energy Storage System, The Journal of Energy Storage, 27 (2020), 101046, 64
Miyakita, T., et al., Development of a New MLI for Orbital Cryogenic Propulsion Systems-Thermal Performance under one Atmosphere to a Vacuum, IOP Conference Series: Materials Science and Engineering, 502 (2019), 1, 012062
Wang, Y., et al., Analysis of Thermal Energy Storage Optimization of Thermal Insulation Material and Thermal Insulation Structure of Steam Pipe-Line, Thermal Science, 24 (2020), 5B, pp. 3249-3257