溶接学会論文集
Online ISSN : 2434-8252
Print ISSN : 0288-4771
熱間等方圧プレス(HIP)中の焼結変形挙動解析
野本 敏治吉村 洋
著者情報
ジャーナル フリー

1990 年 8 巻 1 号 p. 32-38

詳細
抄録

Hot isostatic pressing (HIP) of powders is the manufacturing process which forms high quality and fully dense components from such materials as superalloys, tool steels and a wide range of ceramics. It is well known that the powder compacts reduce their volume due to density change, and the products usually differ in size from the final desired shapes. With the increasing demand for "near net shape" forming, simple and systematic way is greatly required to select the optimum process variables without trial and error procedures.
In this paper, analytical method is presented to predict the sintering deformation behavior during HIP process. Three parts of governing equations are made up: heat conduction equation including matter flow, densification rate equation which describes density change, and shape change equation based on the conservation of mass. Effects of particle radius, HIP temperature, pressure and HIP cycle are discussed on the results of computer simulation of alumina powders.

著者関連情報
© 一般社団法人 溶接学会
前の記事 次の記事
feedback
Top