[1] ANSI/AISC 358–16 (2016). American Institute of Steel Construction. "Prequalified connections for special and intermediate steel moment frames for seismic applications". Chicago, Illinois.
[2] TahamouliRoudsari, M., H. Jamshidi K, and M. Mohebi Zangeneh. (2016). "Experimental and Numerical Investigation of IPE Reduced Beam Sections with Diagonal Web Stiffeners". Journal of Earthquake Engineering, 22 (4): 533-552.
[3] Garoosi, A. M., TahamouliRoudsari, M., & Hashemi, B. H. (2018). "Experimental evaluation of rigid connection with reduced section and replaceable fuse". Structures, 16: 390-404.
[4] Elremaily, A., and Atorod Azizinamini. (2001). "Design provisions for connections between steel beams and concrete filled tube columns". Journal of Constructional Steel Research, 57(9): 971-995.
[5] Elremaily, Ahmed, and Atorod Azizinamini. (2001). "Experimental behavior of steel beam to CFT column connections". Journal of Constructional Steel Research, 57(10): 1099-1119.
[6] Cheng, Chin-Tung, and Lap-Loi Chung. (2003). "Seismic performance of steel beams to concrete-filled steel tubular column connections". Journal of constructional steel research, 59(3): 405-426.
[7] Sheet, Ikhlas S., Umarani Gunasekaran, and Gregory A. MacRae. (2013). "Experimental investigation of CFT column to steel beam connections under cyclic loading". Journal of Constructional Steel Research, 86: 167-182.
[8] Cheng, Chin-Tung, Chen-Fu Chan, and Lap-Loi Chung. (2007). "Seismic behavior of steel beams and CFT column moment-resisting connections with floor slabs". Journal of Constructional Steel Research, 63(11): 1479-1493.
[9] Shin, Kyung-Jae, Young-Ju Kim, and Young-Suk Oh. (2008). "Seismic behaviour of composite concrete-filled tube column-to-beam moment connections". Journal of Constructional Steel Research, 64(1): 118-127.
[10] Debnath, P. P., & Chan, T. M. (2022). “Experimental performance of single blind-bolted CFST column connection under predominant shear loading”. Journal of Constructional Steel Research, 196, 107386.
[11] Jeddi, M. Z., Sulong, N. R., & Ghanbari-Ghazijahani, T. (2022). “Behaviour of double-sleeve TubeBolt moment connections in CFT columns under cyclic loading”. Journal of Constructional Steel Research, 194, 107302.
[12] Shin, Kyung-Jae, et al. (2004). “Behavior of welded CFT column to H-beam connections with external stiffeners”. Engineering Structures, 26(13): 1877-1887.
[13] Jeddi, Mahdi Zeinizadeh, NH Ramli Sulong, and MM Arabnejad Khanouki. (2016). "Seismic performance of a new through rib stiffener beam connection to concrete-filled steel tubular columns: An experimental study". Engineering Structures.
[14] Kang, Chang-Hoon, et al. (2001). "Hysteresis behavior of CFT column to H-beam connections with external T-stiffeners and penetrated elements". Engineering Structures, 23(9): 1194-1201.
[15] Qin, Ying, Zhihua Chen, and Xiaodun Wang. (2014). "Experimental investigation of new internal-diaphragm connections to CFT columns under cyclic loading". Journal of Constructional Steel Research, 98: 35-44.
[16] Ramadan, Hazem M., et al. (2016). "Finite element analysis of circular concrete filled tube connections". Journal of Constructional Steel Research 120: 33-44.
[17] Fanaie, Nader, and Hossein Sadeghi Moghadam. (2019). "Experimental study of rigid connection of drilled beam to CFT column with external stiffeners". Journal of Constructional Steel Research 153: 209-221.
[18] Mirghaderi, Seyed Rasoul, Shahabeddin Torabian, and Farhad Keshavarzi. (2010). "I-beam to box–column connection by a vertical plate passing through the column". Engineering Structures, 32(8): 2034-2048.
[19] Deylami, A., and A. R. Toloukian. (2011). "Effect of Geometry of Vertical Rib Plate on Cyclic Behavior of Steel Beam to Built-up Box Column Moment Connection". Procedia Engineering, 14: 3010-3018.
[20] Gholami, M., A. Deylami, and M. Tehranizadeh. (2013). "Seismic performance of flange plate connections between steel beams and box columns". Journal of Constructional Steel Research, 84: 36-48.
[21] Nia, Z. Saneei, A. Mazroi, and M. Ghassemieh. (2014). "Cyclic performance of flange-plate connection to box column with finger shaped plate". Journal of Constructional Steel Research, 101: 207-223.
[22] Erfani, Saeed, Ahmad Ali Asnafi, and Alireza Goudarzi. (2016). "Connection of I-beam to box-column by a short stub beam". Journal of Constructional Steel Research, 127: 136-150.
[23] Rezaeian, Alireza, Majid Jamal-Omidi, and Farhood Shahidi. (2014). "Seismic behavior of ConXL rigid connection in box-columns not filled with concrete". Journal of Constructional Steel Research, 97: 79-104.
[24] Yang, Chao, et al. (2016). "Numerical study on seismic behaviours of ConXL biaxial moment connection". Journal of Constructional Steel Research, 121: 185-201.
[25] Sabbagh, Alireza Bagheri, Tak Ming Chan, and James Toby Mottram. (2013). “Detailing of I-beam-to-CHS column joints with external diaphragm plates for seismic actions”. Journal of Constructional Steel Research, 88: 21-33.
[26] Hosseini, Seiyed Mahmoud, and Rohola Rahnavard. (2020). “Numerical study of steel rigid collar connection affecting cyclic loading”. Engineering Structures 208: 110314.
[27] Jian, W., & Guang, T. W. (2022). “Experimental Seismic Behavior of RHS Column-to-I Beam Connection with Additional Plates”. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 46(3), 2053-2065.
[28] iu, H., Lan, J., Chen, Z., Zhao, Y., & Jia, L. (2022). “Study on the seismic behavior of connection via welding strengthening under load”. Journal of Constructional Steel Research, 196, 107387.
[29] Sun, D., Yang, Y., Ma, Y., Xue, Y., Yu, Y., & Feng, S. (2022). “Seismic performance of resilient beam-column connection using replaceable stiffener angle steel”. Journal of Constructional Steel Research, 196, 107370.
[30] TahamouliRoudsari, Mehrzad, Sohaei, Shohreh, Torkaman, Morteza, Alizadeh, AliAshraf, Safaee, Seyedamir, Haghaninia, Alishah and Meysam MohammadiMajd. (2019). "Experimental Investigation of I-Shaped Beam to Circular Column Rigid Connection with Stiffened and Non-Stiffened Channel Link". Journal of Earthquake Engineering, 1-23.
[31] Tahamouli Roudsari, Mehrzad, Sohaei, Shohreh, Torkaman, Morteza, Safaee, Seyed Ali, Tahmasebi, salar, Mohammadi, Saleh and Mohammad Meddi Ghiasvand. (2020). "Presenting a New Detail for the Rigid Connection between I-Shaped Beam and Concrete-Filled Steel Tube Column with Stiffened Channel Link". International Journal of Steel Structures, 20, 655–667.
[32] FEMA. (2000). "Recommended Seismic Design Provisions for New Moment Frame Buildings Report". FEMA 350, Federal Emergency Management Agency, Washington DC.
[33] FEMA. (2005). "Improvement of nonlinear static seismic analysis procedures". FEMA- 440, Federal Emergency Management Agency, Redwood City.
[34] Shi G, Wang M, Bai Y, Wang F, Shi YJ, Wang YQ. (2012). "Experimental and modeling study of high-strength structural steel under cyclic loading". Engineering Structures,37:1–13.
[35] ANSI/AISC 360-16 (2016). American Institute of Steel Construction. "Specification for Structural Steel Buildings". Chicago, Illinois.
[36] ANSI/AISC 341-16 (2016). American Institute of Steel Construction. "Seismic Provisions for Structural Steel Buildings". Chicago, Illinois.