[1] Ellingwood, B. R. (2006). Mitigating risk from abnormal loads and progressive collapse. Journal of Performance of Constructed Facilities, 20(4), 315-323. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(315)
[2] Unified Facilities Criteria (UFC)-DoD., (2205), Design of buildings to resist progressive collapse. Department of Defense.
[3] GSA., (2003). Progressive collapse analysis and design guidelines for new federal office buildings and major modernization projects. The US General Services Administration.
[4] Yi, W. J., Yi, F., & Zhou, Y. (2021). Experimental Studies on Progressive Collapse Behavior of RC Frame Structures: Advances and Future Needs. International Journal of Concrete Structures and Materials, 15(1), 1-23. https://doi.org/10.1186/s40069-021-00469-6
[5] Khizab, B., Sadeghi, A., Hashemi, S. V., Mehdizadeh, K., & Nasseri, H. (2021). Investigation the performance of Dual Systems Moment-Resisting Frame with Steel Plate Shear Wall Subjected to Blast Loading. Journal of Structural and Construction Engineering, 8(8), 102-127. doi: 10.22065/jsce.2020.177510.1820
[6] Yaghoubi, M., Aghayari, R., Hashemi, S. (2021). Investigation of progressive collapse in reinforced concrete buildings with slab-wall structural system. Journal of Rehabilitation in Civil Engineering, 9(3), 40-60. doi: 10.22075/jrce.2021.21194.1439.
[7] Sadeghi, A., Hashemi, S., Mehdizadeh, K. (2021). Probabilistic Assessment of Seismic Collapse Capacity of 3D Steel Moment-Resisting Frame Structures. Journal of Structural and Construction Engineering, 8(7), 75-101. doi: 10.22065/jsce.2020.220306.2083.
[8] Panahi, S., & Zahrai, S. M. (2021, June). Performance of typical plan concrete buildings under progressive collapse. In Structures (Vol. 31, pp. 1163-1172). Elsevier. https://doi.org/10.1016/j.istruc.2021.02.045
[9] Karimiyan, S. (2020). Seismic Progressive Collapse Evaluation in 3 Story Reinforced Concrete Buildings due to Inner Column Removal. Journal of Structural and Construction Engineering, 7(Special Issue 1), 206-226. doi: 10.22065/jsce.2018.142459.1617.
[10] Ashrafi, H., Hassanzadeh, S. (2018). Investigation of progressive collapse in reinforced concrete frames, considering end rigid zones and various scenarios for column removal duration. Journal of Structural and Construction Engineering, 5(3), 66-84. doi: 10.22065/jsce.2017.86030.1172.
[11] ACI (2019) Building code requirments for structural concrete (ACI318–19). American Concrete Institute.
[12] Hemmati, A., Kheyroddin, A., Sharbatdar, M., Park, Y., & Abolmaali, A. (2016). Ductile behavior of high performance fiber reinforced cementitious composite (HPFRCC) frames. Construction and Building Materials, 115, 681-689. https://doi.org/10.1016/j.conbuildmat.2016.04.078
[13] Saghafi, M. H., Golafshar, A., & Safakhah, S. (2020). Evaluation of nonlinear behavior of High Performance Fiber Reinforced Cementitious Composite (HPFRCC) frames. Journal of Structural and Construction Engineering, 7(3), 214-238. doi: 10.22065/jsce.2018.134617.1574.
[14] Fascetti, A., Kunnath, S. K., & Nisticò, N. (2015). Robustness evaluation of RC frame buildings to progressive collapse. Engineering Structures, 86, 242-249. https://doi.org/10.1016/j.engstruct.2015.01.008
[15] McKenna F, Fenves GL, Scott MH. Open system for earthquake engineering simulation. University of California, Berkeley; 2013. <http://opensees. berkeley.edu>.
[16] معاونت امور مسکن وساختمان؛ وزارت مسکن و شهرسازی. (1392). بارهای وارد بر ساختمان. تهران. مبحث ششم مقررات ملی ساختمان.
[17] معاونت امور مسکن وساختمان؛ وزارت مسکن و شهرسازی. (1392). طرح و اجرای ساختمانهای بتن آرمه. تهران. مبحث نهم مقررات ملی ساختمان.
[18] مرکز تحقیقات ساختمان و مسکن. (1394). طراحی ساختمانها در برابر زلزله. استاندارد 2800 ویرایش چهارم. تهران. مقررات ملی ساختمان .
[19] Computers and structures- Inc, (2014). ETABS2015 Software. Berkeley, CA.
[20] El-Ariss, B., Elkholy, S., & Shehada, A. (2022). Benchmark Numerical Model for Progressive Collapse Analysis of RC Beam-Column Sub-Assemblages. Buildings, 12(2), 122. https://doi.org/10.3390/buildings12020122
[21] Feng, D., Ren, X., & Li, J. (2016). Implicit gradient delocalization method for force-based frame element. Journal of Structural Engineering, 142(2), 04015122. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001397
[22] Feng, D. C., & Ren, X. D. (2017). Enriched force-based frame element with evolutionary plastic hinge. Journal of Structural Engineering, 143(10), 06017005. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001871
[23] Han, T. S., Feenstra, P. H., & Billington, S. L. (2003). Simulation of highly ductile fiber-reinforced cement-based composite components under cyclic loading. Structural Journal, 100(6), 749-757.
[24] Xu, G., & Ellingwood, B. R. (2011). An energy-based partial pushdown analysis procedure for assessment of disproportionate collapse potential. Journal of Constructional Steel Research, 67(3), 547-555. https://doi.org/10.1016/j.jcsr.2010.09.001
[25] Khandelwal, K., & El-Tawil, S. (2011). Pushdown resistance as a measure of robustness in progressive collapse analysis. Engineering Structures, 33(9), 2653-266. https://doi.org/10.1016/j.engstruct.2011.05.013
[26] Yi, W. J., He, Q. F., Xiao, Y., & Kunnath, S. K. (2008). Experimental study on progressive collapse-resistant behavior of reinforced concrete frame structures. ACI Structural Journal, 105(4), 433.
[27] Saghafi, M. H., Shariatmadar, H., & Kheyroddin, A. (2019). Seismic behavior of high-performance fiber-reinforced cement composites beam-column connection with high damage tolerance. International Journal of Concrete Structures and Materials, 13(1), 1-20. https://doi.org/10.1186/s40069-019-0334-3
[28] Uang, C. M. (1991). Establishing R (or R w) and C d factors for building seismic provisions. Journal of structural Engineering, 117(1), 19-28. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:1(19)