Engineering Mechanics

International Conference

Proceedings Vol. 30 (2024)


ENGINEERING MECHANICS 2024

30th INTERNATIONAL CONFERENCE
May 14 – 16, 2024, Milovy, Czech Republic
;
Editors: Vladimír Fuis and Petr Hájek

Copyright © 2024 Brno University of Technology, Institute of Solid Mechanics, Mechatronics and Biomechanics, Brno

ISBN 978-80-214-6235-9 (printed)
ISSN 1805-8248 (printed)
ISSN 1805-8256 (electronic)

list of papers scientific commitee

Applying a two degree of freedom model for drive-by identification
Bayer J.
pages 46 - 49, full text

A new concept of drive-by identification is examined applying the analogy with a Two Degree Of Freedom (DOF) system where the bridge is considered the ground-supported spring-mass and the moving spring-mass the second DOF. The response of the moving spring-mass is simulated on a bridge model using different road profiles and compared to parameters of the corresponding two DOF system. The focus is the spectral shift that can be observed on the moving spring-mass during its passage along the bridge and could possibly be applied for drive-by identification. The accuracy mainly depends on the relation of the moving spring-mass to the bridge mass and the relation between the natural frequency of the spring-mass and those of the bridge. The simulations showed that road profile can significantly reduce the accuracy of identified results, which imposes limits on practical applications.


back to list of papers

Text and facts may be copied and used freely, but credit should be given to these Proceedings.

All papers were reviewed by members of the scientific committee.


Publication Ethics - Ethical guidelines for publication
Webmaster contact: admin@it.cas.cz

imce   Powered by Imce 3.20  © 2023, Pavel Formánek, Institute of Thermomechanics AS CR, v.v.i. [generated: 0.0274s]