Archive
The editorial board of the "MSTU Vestnik" journal supports the «Open Access» policy which enables users to have free and unlimited access to scientific articles (to read, download, copy, distribute) in case the author is indicated when further quoted.
Mosendz I. A., Kremenetskaya I. P., Drogobuzhskaya S. V., Alekseeva S. A.
Sorption of heavy metals by the filtering containers with serpentine materials
DOI: 10.21443/1560-9278-2020-23-2-182-189
Abstract. The search for effective technologies for the remediation of technologically polluted natural objects is an urgent problem of environmental protection. At the experimental site near Kola MMC JSC (Murmansk region, Monchegorsk), experiments have been carried out on the use of mining waste to create phyto-adsorption sites in technologically polluted territories. During the experiments, filtering modules were used to study the processes of sorption/desorption of emission components with vermiculite-sungulite composition materials obtained by enriching phlogopite mining waste (Murmansk Region, Kovdor). To load two types of filtering modules designed to study open (I) and partially open (II) systems, the authors have used the initial and heat-treated granular sungulite, as well as slurry products (the content of sungulite and vermiculite was 30 %). As a control option, an experiment has been carried out using pure peat, selected in the vicinity of Apatity (Murmansk region). As a result of the study, the layer-by-layer content of the acid-soluble (or semi-gross) form of the components has been determined; the toxicity module has been calculated (the ratio of the total molar content of metals (Cu + Ni) and macronutrients (Ca + Mg)) used to assess the possible toxic effect of products in relation to plants. Pure peat has proved to possess the greatest sorption ability, however, at the end of the experiment, the highest degree of toxicity has been observed for peat; mineral products have been the least toxic. An analysis of the distribution of metals among the layers of filtering modules (II) has shown that intense accumulation of metals is observed in the upper layers; with increasing depth (layers 2–4) there is a gradual decrease in the copper content, in some products nickel is leached in the lower layers. The results of the study have shown that for loading phyto-adsorption sites it is advisable to use a granular sungulite product characterized by good sorption ability and low toxicity.
Printed reference: Sorption of heavy metals by the filtering containers with serpentine materials / I. Mosendz, I. Kremenetskaya, Drogobuzhskaya , Alekseeva // Vestnik of MSTU. 2020. V. 23, No 2. P. 182-189.
Electronic reference: Sorption of heavy metals by the filtering containers with serpentine materials / I. Mosendz, I. Kremenetskaya, Drogobuzhskaya , Alekseeva // Vestnik of MSTU. 2020. V. 23, No 2. P. 182-189. URL: http://vestnik.mstu.edu.ru/v23_2_n83/09_Mosendz_182-189.pdf.
