Technology of flour confectionery products using emulsion obtained in conditions of cavitation processing

type of optimal , t 7 maximum of all three (S-L-G) the stability of the is confirmed by a decrease in the amount of sugar and formed foam. It has been established that the physicochemical effect of high energies leads not only to a decrease in the entropy of the leading processes and technological systems in general, but also to an increase in production efficiency and quality stabilization of the finished product. The study objects were experimental samples of emulsions for sugar cookies and samples of sugar cookies with optimized structural-mechanical and organoleptic characteristics. Physicochemical and organoleptic parameters of emulsion and biscuits were determined using standard methods. Organoleptic indicators were examined in accordance with GOST (All Union State Standard) 24901-89 and GOST 5897-90 1 ; mass fraction of moisture – by the sample drying in the drying chamber according to GOST 5900-73 2 ; mass fraction of fat – by the extraction-weight method according to GOST 31902-2012 3 ; biscuit absorptivity – in terms of mass increase in the product when immersed in the water at the temperature of 20 °C for a certain time (2 minutes) – according to GOST 10114-80 4 . Absorptivity depends on the products porosity and is characterized by the items mass ratio after wetting to the mass of dry products, which is expressed as a percentage. The water activity was determined with AquaLab 4TE analyzer (Decagon Devices, USA) using the mirror-cooled dew point sensor method; rheological characteristics of the emulsion (effective viscosity) was determined by the rotational viscometer Rheotest-2; plastic strength of the cookies – with the KP-3 tool belonging to Professor Volarovich.


Introduction
Recently, certain progress has been made in the development of fundamentally new mixer designs with cavitation technology standing out.
In particular, there is the well-known technology of preparing baking dough using cavitation activated water followed by hydration-induced structuring of gluten proteins, which allows increasing specific volume and elasticity of bread, slowing down firming of bread and reducing the use of bakery improvers. Cavitation treatment of sugar-salt solutions before their mixing with the dough allows reducing the content of salt and sugar in the bread without changing the product taste and nutritional value [1][2][3][4].
In meat industry, studies were conducted on the use of cavitation for producing aromatic emulsions. It has been established that electrolytes (salt, phosphates) have a higher degree of dissociation in cavitation treated water compared to the untreated one, which makes it possible to reduce their quantity in cooked sausage formulations by 10-15 % in comparison to the standard dosage, and thus to improve the quality and environmental safety of the products [5][6][7].
Cavitation technologies have gained extensive use in the dairy industry. Samples of reconstituted raw materials using cavitation water treatment reveal a slight increase in the dry substances mass fraction, including protein, as well as the increase in their density and dynamic viscosity. The data on the dispersed composition of reconstituted milk has proven the ultrasonic cavitation efficiency on the balance of protein and lactose particles in terms of size: the proportion of particles with dimensions ranging from 202 to 243 nm increases, while the control sample is characterized by the predominance of particles of two size fractions (409 ± 10) nm and (174 ± 10) nm [8][9][10].
Thus, the cavitation action on the liquid allows obtaining high-quality technological food and biologically active solutions of extracts, emulsions and suspensions [11][12].
The purpose of the present study is to establish the possibility of controlling emulsion quality under conditions of cavitation processing and to determine its effect on the organoleptic, physical and structuralmechanical characteristics of sugar biscuits.

Materials and methods
The study objects were experimental samples of emulsions for sugar cookies and samples of sugar cookies with optimized structural-mechanical and organoleptic characteristics. Physicochemical and organoleptic parameters of emulsion and biscuits were determined using standard methods. Organoleptic indicators were examined in accordance with GOST (All Union State Standard) 24901-89 and GOST 5897-90 1 ; mass fraction of moisture -by the sample drying in the drying chamber according to GOST 5900-73 2 ; mass fraction of fat -by the extraction-weight method according to GOST 31902-2012 3 ; biscuit absorptivity -in terms of mass increase in the product when immersed in the water at the temperature of 20 °C for a certain time (2 minutes) -according to GOST 10114-80 4 . Absorptivity depends on the products porosity and is characterized by the items mass ratio after wetting to the mass of dry products, which is expressed as a percentage. The water activity was determined with AquaLab 4TE analyzer (Decagon Devices, USA) using the mirror-cooled dew point sensor method; rheological characteristics of the emulsion (effective viscosity) was determined by the rotational viscometer Rheotest-2; plastic strength of the cookies -with the KP-3 tool belonging to Professor Volarovich.

Results and discussion
The quality of flour confectionery products largely depends on how the semi-finished products and dough are prepared. The processes of obtaining emulsions are among the most important fundamentals of the present day food industry. The use of cavitation effect is one of the most promising ways for forming stable emulsions in the presence of high productivity technical means [13]. There are two types of cavitation: acoustic cavitation occurs in a liquid medium during the passage of a high intensity sound wave; hydrodynamic cavitation takes place due to a sharp local decrease in the fluid pressure as a result of high flow velocities [13][14].
Industrial use of cavitation mixers has shown that they allow to exponentially intensify the mixing processes [4], and the physical phenomena associated with cavitation cause a number of effects (Table 1). • Destruction and dispersion of solids; Caused by shocks (short-term pressure pulses) that arise when the bubbles collapse and the microflows appear beside them • Emulsification of immiscible products (emulsions); • Homogenization of the processed product; • Surface cleaning • Initiation and acceleration of chemical reactions Caused by ionization of gas during the formation of cavitation bubbles For the practical implementation of ultrasonic emulsification process, it is necessary to identify optimal exposure regimes and propagation conditions in order to create a uniform ultrasonic field in the mixture of two mutually insoluble liquids and to obtain emulsions with specified dispersion characteristics [13].
The initial stage of emulsion technology for sugar cookies is the stage of preliminary suspension preparation. VNIIKP has developed the basic scheme for suspension preparation in the three-step process [15][16] (Fig. 1).
The three-stage method for the preparation of the suspension ensures high uniformity in the distribution of components throughout the volume and a marked decrease in the amount of undissolved solid phase particles and their size [16; 17] (Fig. 2).
It is commonly known that suspensions are unstable systems and can be demixed with time. In order to increase their stability and dispersion, they were treated under cavitation conditions.
The basic scheme of the emulsion preparation technology using cavitation processing is shown in Fig. 3. The present-day method of suspension preparation (in one step) Three-stage method of suspension preparation Fig. 2. Microphotographs of the suspension structure for various production methods (magnification × 500) Рис. 2. Микрофотографии структуры суспензии для различных способов производства (увеличение × 500) Fig. 3. The basic scheme of emulsion obtained using cavitation processing: HDC* -hydrodynamic cavitation; τ -processing time; V o -volume of processed emulsion; V р -reactor volume; П -pump capacity; AC** -acoustic cavitation; ω -oscillation frequency; К -frequency of emulsion circulation through the reactor; Iв -ultrasound intensity; a -oscillation amplitude; t э -emulsion temperature Рис. 3. Основная схема получения эмульсии с использованием кавитационной обработки: HDC* -гидродинамическая кавитация; τ -время обработки; V o -объем обрабатываемой эмульсии; V р -объем реактора; П -производительность насоса; AC** -акустическая кавитация; ω -частота колебаний рабочего органа; К -кратность циркуляции эмульсии через реактор; Iв -интенсивность воздействия ультразвука; a -амплитуда колебаний; t э -температура эмульсии The suspension was processed under the conditions of combined action of hydrodynamic and acoustic cavitation with different intensity of ultrasound exposure: -at the minimum intensity of ultrasound exposure I min = 0.16·10 6 cm 2 ·s -3 ; -at the maximum intensity of ultrasound exposure I max =1.24·10 6 cm 2 ·s -3 . It was found out that at the minimum intensity of ultrasound exposure I min = 0.16·10 6 cm 2 ·s -3 with an increase in the duration of cavitation treatment, the amount of undissolved sugar in the emulsion decreases, while the emulsion temperature rises from 28 to 45 °C (Fig. 4). At the maximum intensity of ultrasound exposure I max = 1.24·10 6 cm 2 ·s -3 the optimal duration of ultrasonic treatment is 7 minutes, during which the maximum dispersion of all three phases (S-L-G) (the particle size of the solid phase does not exceed 10 microns) is provided and the stability of the emulsion structure is improved, which is confirmed by a decrease in the amount of undissolved sugar and formed foam (Fig. 5). The temperature of the emulsion does not exceed 36 °C.  Notes. * HDC -hydrodynamic cavitation; ** AC -acoustic cavitation.
As a result of further studies, it was established that the use of emulsion obtained through cavitation processing intensifies the central subsystem (preparation of the dough), which predetermines the possibility of obtaining finished products with specific properties. Evaluation of the quality of finished products showed that the taste and structural characteristics of the cookies prepared using the cavitation processing obtained emulsion were superior to those of the control sample prepared using the existing technology (Table 3). Evaluation of products after 90 days of storage showed that the organoleptic, physicochemical and microbiological quality indicators of the experimental samples of cookies were practically unchanged and by the end of the storage period, they met the requirements of GOST 24901-2014 and TR TS 021/2011 5 .