Eu-doped BaTiO₃ ceramics (EBT) were prepared by the cold-pressing ceramic process on the basis of the formula Ba_1-xEu_xTi_1-x/8O₃ (x=0.01-0.05, 0.10). The effects of Eu doping on the structure, microstructure, dielectric and ferroelectric properties of BaTiO₃ ceramics were studied. EBT ceramics have a high density, a low porosity and a fine grain size of 0.7-1.0 μm. As x≤3%, EBT ceramics have a tetragonal perovskite structure. The Curie point decreases linearly at a rate of -11°C/mol% Eu ions with increasing Eu content up to 0.04. However, at x≥0.04, a secondary phase, Eu₂Ti₂O₇, occurs and increases in concentration with increasing Eu, the Curie point remaining constant. The room-temperature dielectric constant of EBT ceramics (ε′_RT=1600-3100) shows a temperature-independent dielectric region below 50°C at x≥0.04, a frequency stability below 10⁶ Hz and good ageing resistance behavior.