Manufacturing Technology 2018, 18(1):57-59 | DOI: 10.21062/ujep/53.2018/a/1213-2489/MT/18/1/57

Measuring of Vibration-Damping Properties of Cast Iron

Petra Kováčiková, Ján Vavro, Ján Vavro jr., Andrej Dubec
Faculty of Industrial Technologies in Púchov, Alexander Dubček University of Trenčín. I. Krasku 491/30, 020 01 Púchov. Slovakia

Nowadays, ever increasing demands are being made on equipment and machine structures. This fact negatively affects their lifespan, reliability and security. Internal damping is caused by material malfunctions in the microstructure, thermoelastic effects, movement of dislocations or the effects of swirling currents. This paper deals with microstructure, chemical composition and mechanical properties of ductile iron. These data are required as input parameters for computational modeling and numerical analysis. The numerical part is focused on the modal analysis of the homogeneous beam sample by finite element method in the ADINA software environment.

Keywords: cast iron, finite element methods, microstructure, mechanical properties

Published: February 1, 2018  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Kováčiková P, Vavro J, Vavro J, Dubec A. Measuring of Vibration-Damping Properties of Cast Iron. Manufacturing Technology. 2018;18(1):57-59. doi: 10.21062/ujep/53.2018/a/1213-2489/MT/18/1/57.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. BILO©OVÁ, ALENA. (2006). Experimental Modal Analysis. V©B - Technical University of Ostrava, p. 104.
    2. EWINS, D.J. (1988). Modal testing: Theory and Practice. Gilliard, Great Yarmouth, p. 269. ISBN 0-86380-017-3.
    3. HANDRIK M., JAKUBOVIČOVÁ L., KOPAS P., SÁGA M. (2010). Analysis of microplastic areas near graphite particles of nodular cast iron loading bellow yield stress, Metalurgija (Metalurgy), No. 2, Vol. 49, (2010), p. 263 - 267, ISSN0543-5846.
    4. NOVÝ, F., KOPAS, P., BOKUVKA, O., SAVIN, A. (2016). Fatigue Durability of Ductile Iron in Very-High-Cycle Region, Manufacturing Technology, No. 2, Vol. 16, (2016), ISSN 1213-2489, p 406-410. Go to original source...
    5. Vaąko, A., Belan, J., Markovičová, L., Tillová, E. (2016). Microstructure and Fatigue Properties of Nodular Cast Iron at Low Frequency Cyclic Loading, Manufacturing Technology, No. 5, Vol. 16, (2016), p 1188-1193. Go to original source...
    6. PU©KÁR, A. (1995). Internal damping of materials. ®ilina, EDIS, pp.382. ISBN 80-7100-260-7.
    7. ASTM International. (2004). Standart test method for measuring vibration-damping properties of materials. Code ASTM E 756-04
    8. STN 42 0461. (1977). Assessment of metallographic structure of castings. Praha, ÚNM,, p 16.
    9. VAVRO, J. (2013). Numerical analysis of voltage states of graphite cast iron structures. Issue I., ®ilina,, p 76. ISBN 978-80-8075-614-7.
    10. STANKOVIČOVÁ, Z., DEKÝ©, V., NOVÁK, P., SAPIETA M. (2015). Numerical Simulation of Thermoe lastic Stress Analysis, Manufacturing Technology, No 5, Vol. 15, (2015), ISSN 1213-2489, p. 925-930 Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content