Manufacturing Technology 2019, 19(1):82-88 | DOI: 10.21062/ujep/248.2019/a/1213-2489/MT/19/1/82

Determination the Influence of Load-rate on Strain and Spring-back Magnitude for Titanium Alloy by means of Numerical Simulation

David Koreček, Pavel Solfronk, Jiří Sobotka, Michaela Kolnerová
Faculty of Mechanical Engineering, Technical University of Liberec. Studentská 2, 461 17 Liberec. Czech Republic

Nowadays, when there is strong tendency to still accelerate production process and thus save time and money, is very necessary to take into account influences of the individual process parameters on forming process. Another tendency tries to reduce weight of parts at keeping the required mechanical properties. These aspects lead also to utilization numerical simulations for modelling processes and materials with the specific utility properties. This paper deals with the influence of load-rate (thus also strain-rate) on the own process of metal sheet forming (namely U-die bending) - in light of both achieved deformation and subsequent spring-back of material. Field of titanium and its alloys application for the engineering industry is closely related especially with its suitable ration between strength and density. Deformation and subsequent spring-back was investigated by the numerical simulation in the software PAM-STAMP 2G.

Keywords: Titanium, Strain-rate, Deformation of material, Spring-back, Numerical Simulation
Grants and funding:

Technical University of Liberec as part of the Student Grant Contest "SGS 21121" with the support of the Specific University Research Grant, as provided by the Ministry of Education, Youth and Sports of the Czech Republic.

Published: February 1, 2019  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Koreček D, Solfronk P, Sobotka J, Kolnerová M. Determination the Influence of Load-rate on Strain and Spring-back Magnitude for Titanium Alloy by means of Numerical Simulation. Manufacturing Technology. 2019;19(1):82-88. doi: 10.21062/ujep/248.2019/a/1213-2489/MT/19/1/82.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. FOUSOVÁ, M., DALIBOR, V., KUBÁSEK, J. (2016) Titanium Alloy Ti-6Al-4V Prepared by Selective Laser Melting (SLM). pp. 691-697. Manufacturing Technology, Volume 16. Go to original source...
    2. ASTARITA, A., PRISCO, U. (2017) Tensile Properties of Hot Stretch Formed Ti-6Al-4V Alloy Component for Aerospace Applications. pp. 141-147. Manufacturing Technology, Volume 17. Go to original source...
    3. ASM HANDBOOK. Volume 8 - Mechanical Testing and Evaluation. 10th ed. Materials Park: ASM International, 2000. s. 998. ISBN 0-87170-389-0.
    4. HOSFORD, W.F., CADDEL, R. Metal Forming (Mechanics and Metallurgy). 3rd ed. New York: Cambridge University Press, 2007. s. 312. ISBN 978-0-521-88151-0.
    5. SHUN-LAI, Z., et al. (2013). Evaluating the significance of hardening behavior and unloading modulus under strain reversal in sheet springback prediction. International Journal of Mechanical Sciences, December 2013, Vol. 77, pp.194-204. ISSN 0020-7403. Go to original source...
    6. TAHERIZADEH, A., et al. (2009). Finite element simulation of springback for a channel draw process with drawbead using different hardening models. International Journal of Mechanical Sciences, April 2009, Vol. 51, No. 4., pp.314-325. ISSN 0020-7403. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content