Manufacturing Technology 2014, 14(1):85-91 | DOI: 10.21062/ujep/x.2014/a/1213-2489/MT/14/1/85

Production of ABS-Aramid Composite Material by Fused Deposition Modeling Rapid Prototyping System

Ludmila Novakova-Marcincinova, Jozef Novak-Marcincin
Faculty of Manufacturing Technologies, Technical University of Kosice, Bayerova 1, 08001 Presov, Slovakia

This paper describes a method of ABS-aramid composite material production by Fused Deposition Modeling Rapid Prototyping System. In the beginning there is presented common technology of parts production by Fused Deposition Modeling method of Rapid Prototyping. Then it deals with the theoretical description of proposed concept production of ABS-aramid composite material by Fused Deposition Modeling method. In the main part it describes an experimental testing of proposed concept at the Faculty of Manufacturing Technologies in Presov in the laboratory of Rapid Prototyping. For creation of sample bodies using the FDM method of RP we used the combination of basic ABS material reinforced by aramid tissue. At the end it summarizes possible trends of further development and research in described area together with possibilities of industrial applications.

Keywords: rapid prototyping, fused deposition modeling, composite material, experimental testing

Published: March 1, 2014  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Novakova-Marcincinova L, Novak-Marcincin J. Production of ABS-Aramid Composite Material by Fused Deposition Modeling Rapid Prototyping System. Manufacturing Technology. 2014;14(1):85-91. doi: 10.21062/ujep/x.2014/a/1213-2489/MT/14/1/85.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. NOVAK-MARCINCIN, J., BARNA, J., NOVAKOVA-MARCINCINOVA, L., FECOVA, V. (2011). Analyses and Solutions on Technical and Economical Aspects of Rapid Prototyping Technology. Tehnicki Vjesnik, Vol. 18, No. 4, p. 657-661, ISSN 1330-3651.
    2. NOVAKOVA-MARCINCINOVA, L., BARNA, J., FECOVA, V., JANAK, M., NOVAK-MARCINCIN, J. (2011). Intelligent design of experimental gearbox with rapid prototyping technology support. INES 2011, 15th IEEE International Conference on Intelligent Engineering Systems, Poprad, p. 77-80. Go to original source...
    3. NOVAKOVA-MARCINCINOVA, L., NOVAK-MARCINCIN, J. (2014). Rapid Prototyping in Developing Process with CA Systems Application. Applied Mechanics and Materials, Vol.. 464, pp. 399-405, ISSN 1662-7482. Go to original source...
    4. STANEK, M., MANAS, M., MANAS, D., PATA (2011). Possibilities of Rapid Prototyping Technology Using for Design of Plastic Parts. Mechanical Technology, Vol. 16, No. 5, 2011, p. 54-58, ISSN 1211-4162.
    5. CHUA, C. K., LEONG, K. F., LIM, C. S. (2003). Rapid Prototyping. Principles and Applications. World Scientific, New Yersey, 420 p. Go to original source...
    6. NOVAK-MARCINCIN, J., NOVAKOVA-MARCINCINOVA, L., BARNA, J., JANAK, M. (2012). Application of FDM rapid prototyping technology in experimental gearbox development process. Tehnicki Vjesnik, Vol. 19, No. 3, p. 689-694, ISSN 1330-3651. Go to original source...
    7. NOVAK-MARCINCIN, J., JANAK, M., NOVAKOVA-MARCINCINOVA, L. (2012), Increasing of product quality produced by rapid prototyping technology. Manufacturing Technology, Vol. 12, No. 12, p. 71-75, ISSN 1213-2489. Go to original source...
    8. GASPAR, S., MASCENIK, J., PASKO, J. (2012). The effect of degassing pressure casting molds on the quality of pressure casting. Advanced Materials Research, No. 428, p. 43-46, ISSN 1022-6680. Go to original source...
    9. PILIPOVIC, A., RAOS, P., SERCER, M. (2009). Experimental analysis of properties of materials for rapid prototyping. International Journal of Advanced Manufacturing Technology, Vol. 40, No. 1-2, p. 105-115. Go to original source...
    10. PILIPOVIC, A., RAOS, P., SERCER, M. (2011). Experimental testing of quality of polymer parts produced by Laminated Object Manufacturing - LOM. Tehnicki Vjesnik, Vol. 18, No. 2, p. 253-260.
    11. STEFANIC, I., RAOS, P., SAMARDZIC, I., TINTOR, B., MUSSER, E. (2012). Rapid prototyping of casting cores. Tehnicki Vjesnik, Vol. 19, No. 2, p. 459-464.
    12. NOVAKOVA-MARCINCINOVA, L., JANAK, M. (2012) Application of progressive materials for RP technology. Manufacturing Technology, Vol. 12, No. 12, p. 76-79, ISSN 1213-2489. Go to original source...
    13. PACURAR, R., PACURAR, A., BERCE, P., BALC, N., NEMES, O. (2012). Porosity change by resin impregnation in structures obtained by selective laser sintering technology. Studia Universitatis Babes-Bolyai Chemia, Vol. 3, pp. 5-13.
    14. AHN, S.-H., MONTERO, M., ODELL, D., ROUNDY, S., WRIGHT, P. K., (2002). Anisotropic material properties of fused deposition modeling ABS. Rapid Prototyping, Vol. 8, No. 4, p. 248-257 Go to original source...
    15. VALICEK J., HLOCH S., KOZAK D. (2009). Surface geometric parameters proposal for the advanced control of abrasive waterjet technology. International Journal of Advanced Manufacturing Technology, Vol. 41, No. 3-4, p. 323-328, ISSN 0268-3768. Go to original source...
    16. KOVACEVIC, D., BUDAK, I., ANTIC, A., KOSEC, B. (2011). Special Finite Elements: Theoretical background and Application, Tehnicki Vjesnik, Vol. 18, No. 4, p. 649-655, ISSN 1330-3651.
    17. BARON, P., BRAZDA, P., DOBRANSKY, J., KOCISKO, M. (2012). Expert system approach to safety management. WIT Transactions on Information and Communication Technologies, Vol. 44, p. 77-88, ISSN 1743-3517. Go to original source...
    18. NOVAKOVA-MARCINCINOVA, L., NOVAK-MARCINCIN, J., TOROK, J., BARNA, J. (2013). Selected experimental tests of materials used in rapid prototyping area. Manufacturing Technology, Vol. 13, No. 2, pp. 220-226, ISSN 1213-2489 Go to original source...
    19. NOVAKOVA-MARCINCINOVA, L., NOVAK-MARCINCIN, J. (2013). Selected Testing for Rapid Prototyping Technology Operation. Applied Mechanics and Materials, Vol.. 308, pp. 25-31, ISSN 1662-7482. Go to original source...
    20. NOVAKOVA-MARCINCINOVA, L., NOVAK-MARCINCIN, J. (2013). Testing of the ABS Materials for Application in Fused Deposition Modeling Technology. Applied Mechanics and Materials, Vol.. 309, pp. 133-140, ISSN 1662-7482. Go to original source...
    21. LAMAR, K. and NESZVEDA, J. (2013). Average probability of failure of a periodically operated devices. Acta Polytechnica Hungarica, Vol. 10, No. 8, pp. 153-167, ISSN 1785-8860
    22. NOVAKOVA-MARCINCINOVA, L., NOVAK-MARCINCIN, J., JANAK, M. (2014). Precission Manufacturing Process of Parts Realized by FDM Rapid Prototyping. Key Engineering Materials, Vol.. 581, pp. 292-297. Go to original source...
    23. RAGAN, E., DOBRANSKY, J., BARON, P., KOCISKO, M., SVETLIK, J. (2012). Dynamic of taking out molding parts at injection molding. Metalurgija,Vol. 51, No. 4, p. 567-570, ISSN 0543-5846.
    24. NOVAKOVA-MARCINCINOVA, L., NOVAK-MARCINCIN, J. (2014). Production Composite Material by FDM Rapid Prototyping Technology. Applied Mechanics and Materials, Vol.. 474, pp. 186-191, ISSN 1662-7482. Go to original source...
    25. NOVAKOVA-MARCINCINOVA, L., FECOVA, V., NOVAK-MARCINCIN, J., JANAK, M., BARNA, J. (2012). Effective Utilization of RP Technology. Materials Science Forum, Vol. 713, p. 61-66, ISSN 1662-9752. Go to original source...
    26. NOVAKOVA-MARCINCINOVA, L., NOVAK-MARCINCIN, J. (2013). Experimental testing of materials used in fused deposition modeling rapid prototyping technology. Advanced Materials Research, Vol. 740, No. 740, pp. 597-602, ISSN 1022-6680 Go to original source...
    27. NOVAKOVA-MARCINCINOVA, L., FECOVA, V., NOVAK-MARCINCIN, J., JANAK, M., BARNA, J. (2012). Effective Utilization of Rapid Prototyping Technology. AIP Conference Proceedings, Vol. 1431, p. 834-841, ISSN 0094-243X. Go to original source...
    28. NOVAKOVA-MARCINCINOVA, L., NOVAK-MARCINCIN, J., BARNA, J., TOROK, J. (2012). Special materials used in FDM rapid prototyping technology application. INES 2012 - IEEE 16th International Conference on Intelligent Engineering Systems, Proceedings, art. no. 6249805, p. 73-76. Go to original source...

    Return to the content