Recent advances in anion-derived SEIs for fast-charging and stable lithium batteries

The construction of stable and reliable electrode interfaces is one of the key scientific issues widely encountered by the battery community. An anion-derived solid electrolyte interphase (SEI) has been recently reported to outperform the traditional solvent-rich SEI in inhibiting side reactions, motivating ion transport and regulating electrode reactions in working Li batteries. Here, we first explicitly introduce the fundamental characteristics of anion-derived SEIs and then concisely present novel developments in electrolyte chemistry involving highly concentrated, localized highly concentrated and weakly solvating electrolytes, which facilitate the formation of anion-derived SEIs on anodes. The critical significance of these SEIs for building fast-charging and stable Li batteries is particularly highlighted. Finally, we outline the future challenges of designing Li metal interfaces to further enhance the cycling reversibility and lifespan of working batteries.


INTRODUCTION
Human activities have resulted in significant climate change [1] . Global warming and frequent extreme weather events, such as high temperatures and heavy rainfall, have highlighted the urgent need for sustainable development [2,3] . Sustainability has become a top priority in modern society and is highly associated with the exploitation and further storage of renewable energy [4][5][6] . Advanced energy storage devices, particularly lithium-ion batteries (LIBs) facilitate the high-efficiency storage and conversion of renewable energy [7] and also boost electrification by promoting the booming development of electric vehicles and novel electronic devices [8,9] . To further unlock the upper limit of conventional LIBs with regards to energy density, the Li metal anode has recently been revived for building next-generation high-energydensity batteries (> 350 Wh kg -1 ) [10][11][12] . However, the practical deployment of Li metal batteries is significantly hampered by their short lifespan and poor safety [13] , which are inherently triggered by the unstable solid electrolyte interphases (SEIs) formed on Li anodes [14,15] .
As the locations where electrode reactions occur, electrode interfaces play an important role in dominating battery performance [16][17][18] . Given the generally low working potential of anodes, electrolyte components, including the solvent and anion, become readily reduced to constitute the solid products at the interface, i.e., the SEI [19] . A native SEI is featured with chemical and structural heterogeneity due to a variety of intricate factors [20] . From the perspective of thermodynamics, the highest occupied molecular orbital and lowest unoccupied molecular orbital (LUMO) of the electrolyte components determine the ease of their decomposition against oxidation and reduction, respectively [21] . Dynamically, the adsorption behavior of electrolyte components at the electrode interfaces predominates the formation of the initial SEI [22] , while the solvation behavior of the electrolyte further affects its subsequent evolution [19] . These factors are closely linked with each other. For example, the complexation with electron-withdrawing Li + reduces the LUMO energy of electrolyte components, making it thermodynamically easier to be reduced by anodes [23] . Furthermore, the varying electrode potential changes the electrical properties of the electrodes, thereby further thermodynamically or kinetically affecting the above aspects [24][25][26] . On this basis, the complex reduction pathways of the multiple components in the electrolyte generate random SEIs with intrinsic heterogeneity [27,28] . More adversely, the huge volume deformation of the electrode during cycling further introduces stress effects and aggravates interfacial instability [29] . Such an unstable SEI will undergo continuous cracking and reconstruction, which not only consumes the active capacity but also gradually thickens, resulting in an increase in cell polarization [30] .
With regards to the above dilemma, extensive research has been focused on the regulation of electrode interfaces in terms of composition [31][32][33][34] , structure [35][36][37] and mechanical properties [38][39][40] by designing a robust, uniform and kinetically favorable SEI [41,42] , thereby paving the way for the construction of stable and fastcharging Li batteries. Recently, anion-derived SEIs have attracted significant research interest and have been considered as ideal SEIs for enhancing the cycling reversibility of graphite and Li electrodes [43] . By rationally adjusting the solvation structure of Li + , the decomposition of anions can be promoted and the conventional interfacial chemistry dominated by solvents can be thus modified [44] . The as-obtained SEI with multiple desired characteristics provides feasible outlets to overcome the current dilemma encountered by working Li metal anodes, such as low Coulombic efficiency (CE), short lifespan and poor safety [ Figure 1] [45] .
Herein, the critical characteristics of anion-derived SEIs are first presented to provide a comprehensive landscape. Second, this review summarizes the key progress and basic understanding in constructing anionderived SEIs via regulating the solvation structure of the electrolyte. Three typical types of electrolyte chemistry, namely, highly concentrated electrolytes (HCEs), localized highly concentrated electrolytes (LHCEs) and weakly solvating electrolytes (WSEs), for facilitating anion-derived SEI formation are specifically introduced. Finally, future research challenges in designing stable Li metal interfaces are discussed.

CHARACTERISTICS OF ANION-DERIVED SEIS
The characteristics of anion-derived SEIs determine the function of electrode/electrolyte interfaces, which in turn affects the overall performance of batteries. The relevant characteristics of anion-derived SEIs are presented from the perspectives of nucleation pattern, chemistry and structure and kinetic properties, thereby providing general insights for understanding interfacial effects.

Nucleation and growth
Different from the formation scenario of solvent-derived SEIs, the nucleation and early growth of anionderived SEIs on graphite anodes can be well described with a surface reaction-controlled two-dimensional progressive nucleation and growth model [46][47][48][49] . Such a unique nucleation feature can be captured from the voltage pit detected during galvanostatic operation exclusively in electrolytes favoring anion decomposition. This behavior is similar to the nucleation process of Li in Li||Cu cells and Li 2 S in Li-S cells [50] , which has been explained from the perspective of the poor solubility and weak affinity of the anion decomposition products with the electrolyte. The chemistry and structure of atomically distributed anion-derived SEIs can be clearly verified via atomic force microscopy [ Figure 2A] [46] .
bis(fluorosulfonyl)imide (FSI -) and bis(trifluoromethane)sulfonimide (TFSI -), with negative charges that are more dispersed and thus prone to dissociation with Li + , are selected in order to ensure reasonable solubility of the lithium salt in non-aqueous solvents [54] . The decomposition products of the anions are almost inorganic substances, as shown in Figure 2B [51] .
Lithium fluoride (LiF), lithium nitride (Li 3 N), lithium sulfide (Li 2 S), lithium oxide (Li 2 O) and so on are typical constituents in anion-derived SEIs, which are present in a mosaic structure with polycrystalline domains [55] . Compared with the organic oligomers mainly resulting from solvent reduction, these inorganic components generally feature larger bandgaps, higher mechanical stiffness and lower reduction reactivity [ Figure 2C] [52] . For example, LiF has a wide bandgap of 8.9 eV and a Young's modulus of 55 GPa [56,57] . Numerous methods for constructing LiF-rich SEIs have been employed to stabilize the interface, including gas phase reactions [58] and the use of additives [31] and artificial interfaces [35] , which can simultaneously inhibit continuous electrolyte decomposition and the growth of dendrites [59] . Li 3 N with a high ionic conductivity (~10 -3 S cm -1 ) is also regarded as a favorable SEI component to passivate the interface and accelerate the interfacial dynamics [60,61] . With a bandgap of 4.7 eV and a Young's modulus of 108 GPa [57,62] , Li 2 O has an excellent ability to suppress electron tunneling and stability against Li, resulting from the low oxidation state [63] .
A variety of inorganic components can complement each other and bestow excellent properties to inorganic-rich SEIs [64] . These properties synergistically equip the anion-derived SEIs with enhanced electron insulation at a relatively thin thickness, modulus and uniformity to mechanically resist dendrite penetration, as well as improved chemical compatibility against Li metal to improve the interfacial stability. Furthermore, the robust and uniform SEI structure is highly beneficial to the homogeneous release of stress so that the interfacial integrity can be better maintained. As described by Shen et al. [65] , a moderate elastic modulus of 3.0 GPa with high structural uniformity can enhance the mechanical stability of SEIs.

Kinetic properties
Anion-derived SEIs with inorganic-rich polycrystalline domains have abundant grain boundaries. Compared with bulk lattice conduction, the energy barrier of Li diffusion through grain boundaries was calculated to be lower and the migration rate is faster [66,67] . The interfaces between different inorganic phases also represent imperative routes for ion transport. Based on the systematic analysis of interfacial kinetics in model systems, inorganic-rich anion-derived SEIs were discovered to decrease the activation energy for both Li + desolvation and diffusion [ Figure 2D] [53] . Aside from the intrinsic kinetic characteristics, the reduced thickness at the whole SEI scale also contributes to expedited kinetics for the interfacial ion transport step. The fast interfacial transport kinetics increase the available concentration of Li + beneath the SEI and the Li deposition turns into a reaction-controlled process, which was deduced as the origin of the spherical Li deposition morphology [68] . In addition, inorganics have a higher surface energy than organics, which facilitates lateral diffusion while restricting vertical dendrite growth [52,69] . The related parameters of different SEI components are presented in Table 1. Collectively, these favorable properties of anion-derived SEIs fundamentally promise the fast-charging function and high stability of working batteries.

SOLVATION REGULATION IN ANION-DERIVED SEIS
Despite the attractive features of anion-derived SEIs, SEI formation in conventional dilute non-aqueous electrolytes is predominately controlled by solvent decomposition. This is ascribed to the preferential solvation of strong electron-donating solvents around Li + in these electrolytes. Generally, solvation involves complex electrostatic interactions among cations, anions and solvent molecules. The competitive coordination of anions and solvents with Li + determines the solubility of lithium salts, as well as the structure of the solvation clusters [ Figure 3A] [76] .
The salt concentration is a critical factor in determining the Li + solvation structure. In traditional dilute solutions, the dipole-ion interaction between the solvent molecules and Li + separates the cations from anions to form solvent-separated ion pairs, which govern the Li + solvation environment [77] . As the salt concentration increases, less free solvent is available to occupy the solvation sheath, thereby allowing anions to interplay with Li +[78] . Solvated clusters containing anions such as contact ion pairs (CIPs) and aggregates (AGGs) appear, in which the anion is coordinated with one, two or more cations [79] . Furthermore, once the intrinsic solvating power of the solvents towards Li + is rationally designed, anions can also largely participate in the Li + solvation shell, although the salt concentration is maintained at a relatively low level [ Figure 3B] [80] . The aggregation of anion in the solvation structure of Li + builds the basis for the anionderived SEI formation. These strategies regarding solvation regulation in HCEs, LHCEs and WSEs are specifically introduced in this section. The basic physicochemical properties of these electrolytes are compared in Table 2.

HCEs
The common concentration of aprotic electrolytes is ~1.0 M given the tradeoff between conductivity, solubility and viscosity [77] . When the solution concentration exceeds 3.0 M, although the viscosity and ionic Table 1
HCEs were initially discovered to inhibit the co-intercalation of propylene carbonate (PC) in graphite due to the optimized interfacial properties [ Figure 4A] [103] , which expanded the choice of electrolyte systems beyond ethylene carbonate [104] . This is of paramount significance, especially for the exploitation of lowtemperature and fast-charging LIBs. By combining experiments and theoretical calculations, Yamada et al. [90] revealed the correlation between the unique solvation structure in HCEs and the interfacial chemistry formed at the electrode surface. Using Raman spectroscopy and X-ray photoelectron  [103] (copyright 2002, IOP Publishing). (B) Projected density of states of dilute and concentrated LiTFSA/AN electrolytes. Insets display the interface between the graphite electrode and electrolyte. Reproduced with permission [45] (copyright 2019, Springer Nature Limited). (C) Rate performance of natural graphite||Li cells using a highly concentrated electrolyte (HCE) and commercial electrolyte. Reproduced with permission [106] (copyright 2013, Royal Society of Chemistry). (D) Solvation structures in dilute electrolyte and HCE from -80 to 100 °C. Adapted with permission [107] [copyright 2021, the author(s)].
spectroscopy (XPS), the bulk structure of a 4.2 M LiTFSI/acetonitrile (AN) HCE, with few free solvent molecules and more coordinated anions, and the anion-dominated interfacial chemistry were clearly identified, respectively. Density functional theory (DFT)-based molecular dynamics revealed a correlation where anions supplied electrons to Li + due to the enhanced interaction between them, resulting in a decrease in their own orbital level. This transfers the LUMO energy from the AN solvent to the TFSIanion at high concentrations [ Figure 4B] [45] . Accordingly, the lithium salt anion was preferentially reduced to form an anion-derived SEI, which further prevented the decomposition of vulnerable AN and enhanced the electrochemical performance of the HCE.
Furthermore, an increase in the equilibrium potential of electrode reactions caused by the higher Li + activity in HCEs also contributes to the mitigation of solvent reduction [105] . The anion-derived interfacial chemistry intensively enhanced the rate capacity at up to 5 C, highlighting the crucial role of interfacial kinetics compared to the bulk transport properties. An enhanced rate performance compared to a commercial carbonate electrolyte was also demonstrated in LIBs using a 3.6 M LiFSI/1,2-dimethoxyethane (DME) HCE, despite the reduced ionic conductivity and increased viscosity of the bulk electrolyte [ Figure 4C] [106] .
Wang et al. [107] reported a 4.0 M LiFSI/dimethyl carbonate (DMC) electrolyte that could afford better rate performance at low temperatures and normal operation at high temperatures [ Figure 4D]. The establishment of a stable Li + -conductive interface compensated for the inferior bulk conductivity, while the thermal stability of the HCE itself combined with the robust anion-derived interface prevented battery failure resulting from gas evolution and the collapse of cathode structures.
Therefore, an interfacial transport rate-determining step can be recognized. The interfacial transport journey of a solvated Li + involves desolvation, interfacial mass transfer and charge transfer processes [43] . HCEs boost the interfacial kinetics from three possible aspects: (1) a high pre-exponential factor due to the high interfacial Li + concentration; (2) a kinetically favorable SEI for fast ion transport; and (3) a distinct desolvation behavior of Li + from CIP and AGG structures compared to that from solvent-separated ion pairs. However, the bulk ionic conductivity of the electrolyte becomes a critical factor for the fast charging of energy-type cells where thick porous electrodes are employed [43] .
Similar to the protective SEI generated by EC [108] , an anion-derived SEI is sufficiently dense and compact to effectively suppress the co-intercalation and decomposition of solvents, guaranteeing the high reversibility of Li + intercalation/deintercalation in graphite [109] . By simply increasing the salt concentration, Wang et al. [87] demonstrated that the incompatibility between flame-retardant trimethyl phosphate and a carbon anode could be largely overcome [ Figure 5A]. This resulted from the spontaneous formation of a robust inorganic passivation film on the anode. In addition, such a dynamic stability may come from the alleviated dissolution of SEI components in HCEs with a reduced solvent activity [81] , as some researches have reported that the anion-derived SEIs formed in HCEs cannot function well in the corresponding dilute solution [110] .
Ming et al. [111] proposed that the solvation structure also contributed to the stable cycling of graphite electrodes other than the effect of the SEI, because they found that the as-formed SEI could not prevent the solvent co-intercalation once the film-forming additive was removed. The introduction of additives weakened the Li + -solvent interaction and promoted a facile desolvation process, thereby inhibiting the cointercalation of solvents. The intercalation of naked Li + is subjected to the desolvation step [112] . From the perspective of free solvent activity, Moon et al. [110] elucidated that Li + intercalation had a higher electrode potential than co-intercalation in concentrated electrolytes with a low solvent activity, so that solvent cointercalation in concentrated electrolytes could be avoided.
The application of HCEs has also been validated as a feasible strategy to pronouncedly improve the reversibility of fast-rate Li metal anodes [113] . Using a 4.0 M LiFSI/DME electrolyte, Qian et al. [85] reported the stable and high-efficiency cycling of Li||Cu cells, which showed a steady CE of 98.4% at 4.0 mA cm -2 for over . Reproduced with permission [115] (copyright 2019, American Chemical Society).
1000 cycles and 97% even at 10.0 mA cm -2 for over 500 cycles [ Figure 5B]. Such superior Li performance at high rates can be explained from the flat Li deposition behavior under the thin, uniform and conductive SEI. In such a high concentration regime, the anion constitutions can also be designed to intentionally regulate the SEI chemistry. Utilizing ab initio molecular dynamics simulations, Alvarado et al. [114] revealed the important role of the competitive decomposition kinetics between FSIand TFSIanions in the bis-salt system, i.e., the mutual modulation effect promoted the generation of a uniform and inorganic SEI.
Zhang et al. [115] found that the introduction of 0.2 M LiNO 3 in 2.0 M LiFSI/DME not only contributed to the construction of a SEI by its own reduction, but also modulated the coordination mode between the primal anions and Li + , thereby promoting the complete decomposition of polarized FSI -[ Figure 5C]. The generated LiF, Li 2 SO x and LiN x O y synergistically homogenized SEI and Li deposition, thereby elevating the cycling reversibility of Li metal anodes. In another work, a dual-salt electrolyte of 2.0 M LiDFOB+1.4 M LiBF 4 /FEC:DEC (v:v = 1:2) promoted synergistically tightly packed Li deposition behavior, which not only extended the cycling life of anode-free cells, but also significantly improved the battery safety [116] . In addition to stabilizing the anode interfaces, functional double-salt electrolytes are also beneficial for the stable operation of cathodes. Using 2.0 M LiTFSI+2.0 M LiDFOB/DME, Jiao et al. [88] realized the effective passivation of Li electrodes and high-voltage LiNi 1/3 Mn 1/3 Co 1/3 O 2 (NCM) cathodes via the formation of thin and B-induced polymeric interfaces. This provided a promising method to enable ether-based electrolytes with superior reductive stability for applications in high-voltage Li metal batteries.
Furthermore, HCEs possess other merits in batteries besides promoting the anion-derived SEI formation, such as widening the oxidation window [86] and operation temperature of the cell, resisting the corrosion of the current collector [83] and alleviating the dissolution of transient metal ions from high-voltage cathodes [82] . As these aspects are beyond the scope of this review, they are not specifically discussed herein.

LHCEs
HCEs exert compelling performance at the expense of viscosity and cost, which is fatal to their practical application [45] . The viscosity of electrolytes affects the wetting to the separators and electrodes. HCEs with ten times or higher viscosity render a significantly prolonged formation time, especially for the use of thick electrodes [97] . Lithium salts represent the main cost of traditional electrolytes due to their high price and the cost increase brought by HCEs with a higher proportion of lithium salts makes them unacceptable for commercial applications. The employment of LHCEs considerably tackles this dilemma. LHCEs are obtained by diluting HCEs with a low-polarity inert solvent that is miscible with them. Low-viscosity hydrofluoroethers (HFEs) are often chosen as the diluent, where the -F groups close to the ether bond can reduce the electron cloud density of oxygen atoms, thereby weakening the ion-dipole interaction [117] . On this basis, LHCEs still retain the solvation structure of HCEs, while the overall concentration and viscosity of the electrolyte can be largely decreased. Hence, the anion-derived interfacial properties are preserved to a large extent. Consequently, LHCEs have become promising electrolyte systems for practical applications and attract tremendous research interest [92,96,118] .
The initial prototype LHCE was first applied to Li-S batteries [119] . For the pursuit of high-rate capability, Dokko et al. [119] screened out a HFE solvent for a HCE of [Li(tetraglyme) 1 ][TFSI], 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether (TTE), according to the criteria of high chemical stability, low polarity and miscibility. The introduction of TTE lowers the electrolyte viscosity and expedites mass transfer, while retaining the solvation structure of the HCE and its functions [ Figure 6A]. A similar electrolyte system was also implemented in LIBs, as manifested in Figure 6B [120] . Solvent activity, the concentration of free solvents, is considered as a critical factor in determining the oxidative stability of electrolytes, the corrosion of aluminum current collectors, the intercalation or co-intercalation and the solubility of intermediates. In 2018, Chen et al. [98] explicitly proposed the concept of LHCEs. Two thirds of DMC solvent by molarity were replaced by a bis(2,2,2-tri-fluoroethyl) ether diluent in the original 5.5 M LiFSI/DMC electrolyte. A high-voltage Li metal battery using such a LHCE realized stable cycling exceeding the HCE counterpart and the anion-derived SEI that was rich in LiF and Li 2 O dedicated to the dendrite-free deposition morphology. Chen et al. [98] successively published several articles on the applications of LHCEs in Li metal batteries by incorporating functional base solvents and diluents. Benefitting from the increased wettability and conduction properties compared to HCEs, Li||NCM batteries using a sulfone-based LHCE exhibited better rate and low-temperature performance [ Figure 6C] [94] . With the addition of the inert TTE diluent, the LUMO energy level further shifted to LiFSI, which mitigated the side reaction between solvents and the Li anode and facilitated the complete decomposition of anions to form a SEI with nitrogen-rich species [ Figure 6D] [94] , resulting in uniform and rapid Li deposition behavior.  [119] (copyright 2013, IOP Publishing). (B) Charge/discharge curve of graphite||Li cells under different solvent/diluent ratios (1 M LiTFSI-xG3-yHFE). Reproduced with permission [120] (copyright 2015, American Chemical Society). (C) Wettability of dilute electrolyte, HCE and LHCE towards polyethylene separators. (D) N 1s spectra of SEI in three electrolytes at different sputtering depths. Reproduced with permission [94] (copyright 2018, Elsevier). LHCE: Localized highly concentrated electrolyte; HCE: highly concentrated electrolyte; HFE: hydrofluoroether. Figure 7A demonstrated the densest deposition morphology in a LHCE composed of plated lithium chunks [121] . In another work, the SEI structure on the surface of Li anodes in the LHCE was clearly distinguished with the help of atomic-view cryo-electron microscopy, as revealed in Figure 7B [122] . A monolithic SEI with a thickness of 10 nm uniformly covered the surface of metallic Li, consisting of inorganics derived from anions. The amorphous structure of the anion-derived SEI may be the reason for the highly reversible Li plating/stripping. The LHCE effectively regulates dense and uniform Li deposition, as described above. Based on this, Cai et al. [123] determined that the LHCE increases the safe lithium-plating boundary in LIBs to 25% of the lithiation capacity. The plated Li was evenly distributed on the surface of graphite particles and there was scarcely any "dead lithium" signal at the delithiated state according to timeof-flight secondary ion mass spectrometry results, as depicted in Figure 7C [123] . Recently, Jiang et al. [89] probed the fast-charging performance of graphite half cells using a 1.5 M LiFSI/DME:bis(2,2,2trifluoroethyl) ether (v:v = 1:2) electrolyte. Benefitting from the lowest interfacial impedance and moderate bulk resistance among the three electrolytes, the cell containing the LHCE delivered a capacity of 220 mAh g -1 at 4.0 C, which was over four times higher than that of a routine electrolyte and HCE [ Figure 7D] [89] .  [122] [copyright 2019, the author(s)]. (C) Li and C elemental mapping of time-of-flight secondary ion mass spectrometry during cycling in LHCE (left) and conventional concentration electrolyte (right). Reproduced with permission [123] (copyright 2021, Wiley VCH GmbH). (D) Rate capability of graphite||Li cells using different electrolytes. Reproduced with permission [89] (copyright 2020, Wiley VCH GmbH). SEI: Solid electrolyte interphase; LHCE: localized highly concentrated electrolyte.
The general recognition of a diluent is that it breaks the three-dimensional solution structure of a HCE and separates large ion clusters, but it is unclear whether it affects the Li + solvation structure and the formation of the SEI. In some LHCEs, the diluent weakens the coordination of anions with Li + [98,124] , while in other LHCEs, this situation is reversed [93] . The root of these contradictory conclusions lies in the binding strength distinction of diluents and base solvents toward Li + . The polarity of the diluent needs to be properly selected, as poor miscibility with the original electrolyte can be expected when the polarity is too low, while the Li + solvation structure of the HCE will be destroyed when the polarity is too high.
Cao et al. [125] specifically investigated the solvation structure of various fluorinated co-solvents in a LHCE via ab initio molecular dynamics simulations. As shown in Figure 8A, the radial distribution of the components in the LHCE indicates that some diluents can enter the second solvation shell to participate in the coordination with Li + , thereby interfering with the interaction between the anions and Li + in the HCE, as well as the anion-derived SEI chemistry. In contrast, Piao et al. [99] found that the interaction between anions and Li + was enhanced when the TTE counter solvent was added to the LiFSI/DMC concentrated electrolyte (T3). Figure 8B demonstrates the increased proportion of highly FSI --coordinated Li + (AGG-III, FSIcomplexing with over 3 Li + ) based on molecular dynamics simulations, which induces a LiF-rich SEI compared to the HCE (D7). Recently, Ding et al. [126] revealed the underlying mechanism of co-solvent effects in LHCEs. Specifically, the low-polarity diluent provides a low-dielectric environment, where more anions associate with Li + to form AGG structures. Under the electrostatic attraction of the negatively charged Li anode [127] , the positively charged AGG aggregates can approach the electrode surface and are preferentially reduced to govern the SEI chemistry [ Figure 8C] [128] .
Moreover, a solvent diagram was drawn to correlate the relative binding energy and dielectric constant, providing a guiding criterion for the choice of co-solvents [ Figure 8D] [126] . The choice of base solvents also has a crucial influence on the formation of the SEI. Li et al. [129] systematically compared the discrepancies between ether-and ester-based LHCE systems in high-voltage Li metal batteries. DFT calculations revealed that the Li + -DME complex had a higher LUMO energy level than that of Li + -DMC, i.e., the Li + -DME complex was more compatible with Li electrodes due to its higher reductive stability. Therefore, the anionic decomposition on the surface of the Li electrodes was dominant in the ether-based LHCE, as also proved by the existence of the complete anion decomposed products found in the SEI according to the XPS results. Through the screening of low-polarity base solvents with higher LUMO energy levels, Xu et al. [130] designed a LHCE that could achieve a high CE under demanding conditions (99.7% at 1.0 mA cm -2 , 3.0 mAh cm -2 ). This stemmed from the optimized interfacial structure and reduced SEI generation/reconstruction.

WSEs
In addition to tuning the salt/solvent ratio by the increasing salt concentration, reducing the intrinsic solvating power of solvents is another method used to force anions into the inner solvation shell of Li + . From this perspective, Yao et al. [80] proposed the concept of a WSE, where only a solvent with weak solvation power was adopted. On this basis, abundant CIP and AGG structures in HCEs and LHCEs were inherited at a considerably low salt concentration (1.0 M), thereby circumventing the cost and intricate interaction among multicomponents. Figure 9A illustrates the change in binding energy between Li + with solvents and anions in different solvents acquired from DFT calculations. The relative binding energy (defined as the difference between the binding energy of Li + -solvent and Li + -anion, E S -E A ) is the largest in the non-polar solvent, 1,4-dioxane, which manifests that anions prevail in the competitive coordination with Li + . Consequently, it can be preferentially decomposed to form an anion-induced SEI.
As shown in Figure 9B, such interfacial chemistry results in a lower activation energy of Li + desolvation and transport through the SEI according to the results of temperature-dependent impedance tests using a threeelectrode setup, which renders rapid interfacial kinetics in favor of the fast-charging performance. Lee and Pham [101] introduced another ether-based solvent of 1,2-diethoxyethane (DEE) with a low permittivity as a single solvent. Raman spectroscopy illustrated that the low solvation capability of DEE explicitly increased the ratio of anion ligands, including CIP and AGG structures, at normal concentrations [ Figure 9C] [101,131] , contributing to LiF-rich robust passivation layers on both electrodes. In earlier work, Yu et al. [117] synthesized a fluorinated 1,4-dimethoxylbutane solvent and identified its low solvation ability with Li + , incurring a high anion/solvent ratio in the solvation sheath. Such a solvation structure induced the anionderived SEI, presenting thin, amorphous, inorganic-rich and homogeneous characteristics [ Figure 9D] [117] .  [128] (copyright 2020, WILEY VCH GmbH). (D) Solvent diagram dependent on dielectric constant and relative binding energy (compared to DME). The solvents in the cyan region can enhance the coordination between Li + and anions, which facilitates the generation of the anion-derived SEI. Reproduced with permission [126] (copyright 2021, WILEY VCH GmbH). SEI: Solid electrolyte interphase; LHCE: localized highly concentrated electrolyte; HCE: highly concentrated electrolyte; FSI -: bis(fluorosulfonyl)imide.
Under the protection of the superior SEI, the Li metal anode achieved highly-efficient cycling with a CE of 99.52%. Industrial anode-free pouch cells achieved a ~325 Wh kg -1 single-cell energy density and 80% capacity retention after 100 cycles.
In addition to the above single-solvent WSEs, some electrolyte systems, where weakly coordinated solvents are utilized to partially substitute for polar ones, have also been reported. In order to revive the PC electrolyte system with high-voltage cathode compatibility and a wide liquid range, Liu et al. [102] introduced weak-polarity diethyl carbonate (DEC) into a LiPF 6 /PC electrolyte to decrease the coordination number of solvents with Li + . As exhibited in Figure 10A, a more negative charge accumulated on the PC molecule (Li + /PC-DEC = 1:5, molar ratio), which increased the LUMO energy level of PC and enhanced the reduction endurance. In another work, a low-density monoether, methyl propyl ether (MPE), with appropriate polarity and stability against Li was added to the electrolyte [100] . Under the function of weakly coordinated MPE, TFSIwas subjected to intensive coordination with Li + , which was responsible for the prominently enhanced LiF peak in the SEI compared with the control sample [ Figure 10B] [100] . Recently, Kim et al. [132]  Activation energy for Li + desolvation and transport across the SEI in different electrolytes obtained by temperature-dependent threeelectrode electrochemical impedance spectroscopy. Reproduced with permission [80] (copyright 2019, Wiley VCH GmbH). (C) Raman spectra and decoupled three-type stretching vibrations environments of FSI in different electrolytes. Reproduced with permission [101] (copyright 2021, Wiley VCH GmbH). (D) Cryo-electron microscopy images and F 1s XPS depth profiles of Li anode surface. Adapted with permission [117] [copyright 2020, the author(s)]. SEI: Solid electrolyte interphase; WSE: weakly solvating electrolyte; DFT: density functional theory ; FSI -: bis(fluorosulfonyl)imide; XPS: X-ray photoelectron spectroscopy.
established the relationship between solvation energy and Li electrode cyclability, which lies in the strong correlation among Li + solvation structure, interfacial chemistry and the reversibility of Li cycling, as depicted in Figure 10C. In the weak binding solvent, more anions participate in the solvation structure to dominate the SEI chemistry. As-formed anion-derived SEIs composed of abundant inorganics are often conducive to the efficient utilization of Li [133] .  [100] (copyright 2021, Wiley VCH GmbH). (C) Schematic of correlation among the binding power of solvents, solvation structures and the formation of SEI. Reproduced with permission [132] (copyright 2021, American Chemical Society).

CONCLUSIONS AND PROSPECTS
The development of fast-charging and stable batteries is strongly reliant on the design of advanced electrolytes. Current commercial ester electrolytes no longer meet the requirements for high-rate, long-life and safe batteries, let alone for applications under demanding conditions, such as high-and lowtemperature scenarios. By regulating the solvation structure, the properties of the corresponding electrolyte bulk and electrode/electrolyte interfaces are altered, which is expected to remove the constraints from traditional electrolyte systems.
HCEs generate a solvated structure with deficient solvents by virtue of a higher salt concentration, which promotes the coordination of anions and improves the reductive and oxidative stability of the system. The as-formed anion-derived SEI has an indispensable role in tolerating parasitic reactions and optimizing interfacial Li + transport. Furthermore, HCEs bestow an extended voltage window and ameliorative safety upon Li batteries, although they compromise the electrolyte viscosity and bulk ionic conductivity. In this regard, the introduction of inert diluents separates the electrochemical properties of HCEs from their physicochemical characteristics, thereby solving the bulk issue specifically. LHCEs not only improve the wetting and bulk transport but also further facilitate anions to participate in the solvation of Li + . Consequently, the elaborate bulk properties and anion-dominated SEI with abundant inorganic components significantly expand the operating temperature range, fast-charging capability and stability of Li batteries. Another method for anion-derived SEI involves adjusting the intrinsic solvation power of solvents. The weakly coordinated solvents adopted in the WSEs favor more anions into the solvation sheath, which facilitates their decomposition, even at low salt concentrations, to form an anion-derived SEI with fast interfacial kinetics.
The bulk properties and cost of HCEs limit their practical application. In addition, WSEs require a careful screening for suitable solvents to balance the solvation ability and the dissolution ability of Li salts. In comparison, LHCEs can be considered as "all-rounders" and have excellent potential as next-generation cutting-edge electrolyte systems, considering their superior performance and high design flexibility. Related spectroscopy, nuclear magnetism, cryo-electron microscopy and theoretical calculations have provided a wealth of information regarding the solvation structure, thermodynamic characteristics and interfacial composition and structure of electrodes in these emerging electrolytes. It is generally accepted that the solvation structure predominates in the formation and evolution of electrode interfaces. However, there are still gaps in the correlation between interfacial chemistry and electrode electrochemical performance in guiding rational design, and advanced characterization technology, fresh viewpoints and novel theories are strongly needed to bridge them in order to pursue future research breakthroughs in the battery community.
It is noteworthy that SEIs will undergo rupture and reconstruction during dynamic evolution, especially on host-free Li electrodes. Consequently, the lithium salt is gradually consumed to repair the anion-derived SEI and the accumulated SEI also increases battery polarization. A rigid SEI that is rich in inorganics may poorly withstand the mechanical deformation of the electrode. The combination of organic and inorganic constituents in an optimized spatial structure is expected to achieve the design of interfaces with high toughness, stability and ionic conductivity.

Authors' contributions
Proposed the topic of this review: Huang JQ Prepared the manuscript: Xiao Y, Xu R Collectively discussed and revised the manuscript: Xiao Y, Xu R, Xu L, Ding JF, Huang JQ

Availability of data and materials
Not applicable.

Financial support and sponsorship
This work was supported by the Beijing Natural Science Foundation (JQ20004) and Scientific and Technological Key Project of Shanxi Province (20191102003).

Conflicts of interest
Not applicable.

Ethical approval and consent to participate
Not applicable.