|

Certain Features of Interaction Between Laser Radiation and Metals

Authors: Glotov A.N., Golubenko Yu.V., Desyatskov V.A., Stepanov A.V. Published: 18.03.2020
Published in issue: #1(130)/2020  
DOI: 10.18698/0236-3933-2020-1-15-32

 
Category: Instrument Engineering, Metrology, Information-Measuring Instruments and Systems | Chapter: Design and Instrument Engineering Technology and Electronic Equipment  
Keywords: laser radiation, high-frequency Q-switching, radiation energy density, transverse distribution, ablative process, interaction efficiency

The paper presents experimental investigation results concerning the problem of optimising the efficiency of interaction between laser radiation and metals. We used several types of Nd lasers featuring the desired combination of power, temporal and spatial radiation parameters as sources of the radiation required. To pump these lasers, we employed rectangular pulses at a periodicity eliminating effects characteristic of continuous-wave and pulsed laser operation modes. This limits the laser radiation parameters driving the interaction efficiency functions to strictly those parameters that match the single-pulse laser operation mode. Temporal radiation parameter variation involved measurements in the free-running and high-frequency Q-switching modes as well as adjusting pumping (lasing) pulse durations. Power parameter variation was implemented through altering radiation energy density over the irradiated surface. Spatial structure of the ablative radiation was varied by means of optical radiation transfer facilities and different laser emitters. The experimental investigation results allowed us to establish certain patterns concerning the interaction between laser radiation and metals as a function of radiation parameters listed

References

[1] Ready J. Effects of high-power laser radiation. Academic Press, 1971.

[2] Arutyunyan R.V., Baranov V.Yu., Bol’shov L.A., et al. Thermohydrodynamic models of the interaction of pulse-periodic radiation with matter. Sov. J. Quantum Electron., 1987, vol. 17, no. 2, pp. 163--168. DOI: https://doi.org/10.1070/QE1987v017n02ABEH006560

[3] Arutyunyan R.V., Bol’shov L.A., Goloviznin V.M., et al. Displacement of melt at nonstationary laser effect on metals. Doklady AN SSSR, 1987, vol. 292, no. 1, pp. 89--92 (in Russ.).

[4] Goncharov V.K., Karaban’ V.I., Kolesnik A.V. Time dependences of the optical properties of a laser erosion jet. Sov. J. Quantum Electron., 1985, vol. 15, no. 4, pp. 498--500. DOI: https://doi.org/10.1070/QE1985v015n04ABEH006970

[5] Goncharov V.K., Karaban’ V.I., Ostrometskiĭ V.A. Screening of laser radiation by the damage products of different metals. Sov. J. Quantum Electron., 1986, vol. 16, no. 6, pp. 808--811. DOI: https://doi.org/10.1070/QE1986v016n06ABEH006914

[6] Kravets A.N., Kraynov A.S., Rodin V.Yu., et al. Raising efficiency of cutting aluminum alloys by combined laser radiation. Svarochnoe proizvodstvo, 1997, no. 8, pp. 34--38 (in Russ.).

[7] Deev A.A., Kikin P.Yu., Pchelintsev A.I. Dimensional processing of metals by laser pulses of complex amplitude-time structure. Pis’ma v ZhTF, 1992, vol. 18, no. 6, pp. 68--71 (in Russ.).

[8] Arutyunyan R.V., Baranov V.Yu., Bol’shov L.A., et al. Ejection of material from a solid target subjected to the combined action of two laser pulses of differing durations. Sov. J. Quantum Electron., 1984, vol. 14, no. 6, pp. 821--825. DOI: https://doi.org/10.1070/QE1984v014n06ABEH005176

[9] Gippius N.A., Danileyko Yu.K., Ionov P.V., et al. Possibility of combined effect of two YAG:Nd3+-lasers radiation on metals. Doklady AN SSSR, 1989, vol. 308, no. 5, pp. 11220--1127 (in Russ.).

[10] Klimentov S.M., Pivovarov P.A., Konov V.I., et al. Laser microprocessing in a gas environment at a high repetition rate of ablative pulses. Quantum Electron., 2004, vol. 34, no. 6, pp. 537--540. DOI: https://doi.org/10.1070/QE2004v034n06ABEH002769

[11] Gornyi S.G., Grigor’ev A.M., Petrov M.I., et al. Specific features of metal surface processing by nanosecond laser pulse trains. Quantum Electron., 2002, vol. 32, no. 10, pp. 929--932. DOI: https://doi.org/10.1070/QE2002v032n10ABEH002320

[12] Bosak N.A., Vasil’ev S.V., Ivanov A.Yu., et al. Characteristic features of the formation of a crater on the surface of a metal irradiated with repeated laser pulses. Quantum Electron., 1999, vol. 29, no. 4, pp. 351--354. DOI: https://doi.org/10.1070/QE1999v029n04ABEH001486

[13] Klimentov S.M., Kononenko T.V., Pivovarov P.A., et al. The role of plasma in ablation of materials by ultrashort laser pulses. Quantum Electron., 2001, vol. 31, no. 5, pp. 378--382. DOI: https://doi.org/10.1070/QE2001v031n05ABEH001958

[14] Basiev T.T., Garnov S.V., Klimentov S.M., et al. High-speed ablation of ultradeep channels by a phase-conjugate dynamically controlled passively Q-switched Nd:YAG laser. Quantum Electron., 2007, vol. 37, no. 10, pp. 956--960. DOI: https://doi.org/10.1070/QE2007v037n10ABEH013624

[15] Ananyev Yu.A. Opticheskie rezonatory i problema raskhodimosti lazernogo izlucheniya [Optical resonators and problem of laser radiation divergence]. Moscow, Nauka Publ., 1979.