JACoW logo

Journals of Accelerator Conferences Website (JACoW)

'Journal of Accelerator Conferences Website' (JACoW) is a publisher in Geneva, Switzerland that publishes the proceedings of accelerator conferences held around the world by an international collaboration of editors.


https://doi.org/10.18429/JACoW-IPAC2022-TUPOST017
Title PEG Contribution to the LLRF System for Superconducting Elliptical Cavities of ESS Accelerator Linac
Authors
  • W. Cichalewski, G.W. Jabłoński, K. Klys, D.R. Makowski, A. Mielczarek, A. Napieralski, P. Perek, P. Plewinski
    TUL-DMCS, Łódź, Poland
  • A. Abramowicz, K. Czuba, M.G. Grzegrzółka, K. Oliwa, I. Rutkowski, W. Wierba
    Warsaw University of Technology, Institute of Electronic Systems, Warsaw, Poland
  • P.R. Bartoszek, K. Chmielewski, K. Kostrzewa, T. Kowalski, D. Rybka, M. Sitek, J. Szewiński, Z. Wojciechowski
    NCBJ, Świerk/Otwock, Poland
  • M. Jensen
    ESS, Lund, Sweden
  • A.J. Johansson, A.M. Svensson
    Lund University, Lund, Sweden
Abstract The LLRF (Low-Level Radio Frequency) system optimizes energy transfer from the superconducting resonator to the accelerating beam. At ESS, one LLRF system regulates a single cavity. This digital system’s HW platform is the MTCA.4 standard. The system has been co-designed by ESS, Lund University, and the PEG (Polish Electronic Group) consortium. The PEG is also responsible for the system components design, evaluation, and production (like Local Oscillator Rear transition module, piezo tuner driver RTM, RTM carrier board, and others). The PEG delivers a HW/SW cavity simulator, an LLRF system test-stand, and provides necessary integration and installation services required for complete system preparation for the linac commissioning and operation phase. The paper summarizes the PEG work on the development and preparation of the LLRF systems for the ESS elliptical structures. The efforts concerning hardware and software components prototyping and evaluation are discussed. Moreover, we present the current status of the project, including components mass production, integration, and installation work.
Paper download TUPOST017.PDF [1.711 MB / 4 pages]
Cite download ※ BibTeX LaTeXText/WordRISEndNote
Conference IPAC2022
Series International Particle Accelerator Conference (13th)
Location Bangkok, Thailand
Date 12-17 June 2022
Publisher JACoW Publishing, Geneva, Switzerland
Editorial Board Frank Zimmermann (CERN, Meyrin, Switzerland); Hitoshi Tanaka (RIKEN, Hyogo, Japan); Porntip Sudmuang (SRLI, Nakhon, Thailand); Prapong Klysubun (SRLI, Nakhon, Thailand); Prapaiwan Sunwong (SRLI, Nakhon, Thailand); Thakonwat Chanwattana (SRLI, Nakhon, Thailand); Christine Petit-Jean-Genaz (CERN, Meyrin, Switzerland); Volker R.W. Schaa (GSI, Darmstadt, Germany)
Online ISBN 978-3-95450-227-1
Online ISSN 2673-5490
Received 08 June 2022
Revised 16 June 2022
Accepted 19 June 2022
Issue Date 20 June 2022
DOI doi:10.18429/JACoW-IPAC2022-TUPOST017
Pages 884-887
Copyright
Creative Commons CC logoPublished by JACoW Publishing under the terms of the Creative Commons Attribution 3.0 International license. Any further distribution of this work must maintain attribution to the author(s), the published article's title, publisher, and DOI.