Title |
Electron Stimulated Desorption From Titanium Tube |
Authors |
- O.B. Malyshev, R. Valizadehpresenter
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
|
Abstract |
Titanium is one of material that used for production of accelerator vacuum chamber and components. In this paper we report the results of vacuum properties evaluation measurements of titanium vacuum chamber. The sample was produced from 40-mm inner diameter tube made of titanium and equipped with CF40 flanges at both ends. The electron stimulated desorption (ESD) was measured after 24-h bakeout to 80, 150, 180 and 250 oC. H₂ and CO initial sticking probabilities were measured after bakeout before the ESD measurements. After ESD measurements, the initial H₂ and CO sticking probabilities were measured again together with CO sorption capacity. These measurements provide the results for ESD as a function of electron dose baked to different temperatures and demonstrate the efficiency of electron stimulated activation of titanium vacuum chamber.
|
Paper |
download THPOTK038.PDF [0.385 MB / 4 pages] |
Cite |
download ※ BibTeX
※ LaTeX
※ Text/Word
※ RIS
※ EndNote |
Conference |
IPAC2022 |
Series |
International Particle Accelerator Conference (13th) |
Location |
Bangkok, Thailand |
Date |
12-17 June 2022 |
Publisher |
JACoW Publishing, Geneva, Switzerland |
Editorial Board |
Frank Zimmermann (CERN, Meyrin, Switzerland); Hitoshi Tanaka (RIKEN, Hyogo, Japan); Porntip Sudmuang (SRLI, Nakhon, Thailand); Prapong Klysubun (SRLI, Nakhon, Thailand); Prapaiwan Sunwong (SRLI, Nakhon, Thailand); Thakonwat Chanwattana (SRLI, Nakhon, Thailand); Christine Petit-Jean-Genaz (CERN, Meyrin, Switzerland); Volker R.W. Schaa (GSI, Darmstadt, Germany) |
Online ISBN |
978-3-95450-227-1 |
Online ISSN |
2673-5490 |
Received |
25 May 2022 |
Revised |
12 June 2022 |
Accepted |
16 June 2022 |
Issue Date |
17 June 2022 |
DOI |
doi:10.18429/JACoW-IPAC2022-THPOTK038 |
Pages |
2850-2853 |
Copyright |
Published by JACoW Publishing under the terms of the Creative Commons Attribution 3.0 International license. Any further distribution of this work must maintain attribution to the author(s), the published article's title, publisher, and DOI. |
|