Equilibrium, Thermodynamic and Mechanism Studies of Malachite Green Adsorption on Used Black Tea Leaves from Acidic Solution

Article Preview

Abstract:

This study reports the equilibrium adsorption mechanism and thermodynamics for the removal of Malachite Green (MG) from acidic solution using Used Black Tea Leaves (UBTL) as a low cost adsorbent. The effect of initial dye concentration, processing temperature and the presence of electrolytes on the adsorption from acidic solutions were investigated in batch process. Adsorption process was attained to the equilibrium at about 24 hours. Adsorption isotherms of MG on UBTL for different temperatures were constructed at pH 2.0 and the equilibrium adsorption data were analyzed using different model equations such as Langmuir, Freundlich, Temkin, Dubinin-Radushkevich (D-R), Harkin-Jura, Halsey, Elovich-Larionov and Flory-Huggens isotherms. The experimental results were reasonably correlated by Langmuir, Flory-Huggins and D-R models than other isotherm models. The maximum adsorption capacity (qm), intensity of adsorption (b) and separation factor (Rb) were calculated from Langmuir plot and activation energy of adsorption (Ead) was determined from D-R isotherm. At pH 2.0, the equilibrium adsorption capacity of UBTL to MG is 110 mg∙g-1 at 30°C, which was increased with increasing temperature suggested endothermic nature of adsorption. Thermodynamics parameters: ΔGads, ΔHads and ΔSads were calculated from Langmuir constant (b). The positive values of enthalpy and free energy, and negative value of entropy suggested that the adsorption is less spontaneous and surface migration or fragmentation of MG molecules on UBTL surface might be occur. Again, the low value of activation energy of adsorption (Ead = 0.3 kJ∙mol-1 <8 kJ∙mol-1) suggested that the adsorption is controlled by physical in nature. A possible mechanism involvement of protonation is proposed from the effect of electrolytes during the adsorption of MG on UBTL at pH 2.0.

Info:

Pages:

77-88

Citation:

Online since:

February 2016

Export:

* - Corresponding Author

[1] E. Sayan, Chem. Eng. J., 119 (2006) 175-181.

Google Scholar

[2] N.K.E.M. Yahaya, M.F.P.M. Latiff, I. Abustan, O.S. Bello, M.A. Ahmad, International J. of Engineering and Technol., 11 ( 2011) 248-252.

Google Scholar

[3] A.R. Khan, Pak. J. Sci. Ind. Res., 45 (2002) 82-85.

Google Scholar

[4] G. Sekaran, K.A. Shanmugasundaram, M. Mariappan, , K.V. Raghavan, Indian J. Chem Technol., 2 (1995) 311.

Google Scholar

[5] I.A.W. Tan, A.L. Ahmad, B.H. Hameed, J. Hazard. Mater., 154 (2008) 337-346.

Google Scholar

[6] A. Ozer, G. Dursun, J. Hazard. Mater., 146 (2007) 262-269.

Google Scholar

[7] S. Altenor, B. Carene, E. Emmanuel, J.E. Lambert, S. Gaspard, J. Hazard. Mater., 165 (2009) 1029-1039.

Google Scholar

[8] B. Girgis, S. Abdel-Nasser, A. El-Hendawy, Micropor. Mesopor. Mater., 52 (2002) 105-117.

Google Scholar

[9] N.M. Haimour, S. Emeish, Waste Manage., 26 (2006) 51-60.

Google Scholar

[10] T. Yang, L.A. Chong, Mater. Chem. Phys., 100 (2006) 438-444.

Google Scholar

[11] B.P. Chandran, Water Res., 36 (2002) 2824-2830.

Google Scholar

[12] M.A. Hossain, M. Kumita, Y. Michigami, S. Mori, J. Chem. Eng. Jpn., 38 (2005) 402-406.

Google Scholar

[13] M.A. Hossain, M. Kumita, Y. Michigami, S. Mori, Adsorption, 11 (2005) 555-564.

Google Scholar

[14] M.A. Hossain, K. Mikio, S. Mori, African J Pure and Appl. Chem. 4(7) (2010) 135-141.

Google Scholar

[15] M.A. Hossain, M.L. Hossain, International J. Recent Sci. Res. 4(10) (2013) 1575-1579.

Google Scholar

[16] M.A Hossain, M.S. Alam, Iran. J. Environ. Health. Sci. Eng., 9 (2012) 2-15.

Google Scholar

[17] M.A. Hossain, M.L. Hossain, Int. J. Adv. Res. 2(4) (2014) 360-374.

Google Scholar

[18] M.A. Hossain, T.A. Hassan, Orbital: Elec. J. Chem., 5(3) (2013) 148-156.

Google Scholar

[19] M.A. Hossain, M.A. Rahman, Orbital Elec. J. Chem., 4(3) (2012) 187-201.

Google Scholar

[20] M.A. Hossain, Z. Hasan, Dhaka Univ. J. Sci., 59(2) (2011) 193 – 197.

Google Scholar

[21] I. Langmuir, I., J. Am Chem Soc., 40 (1918) 1361-1403.

Google Scholar

[22] M.A. Ackacha, M. Drmoon, International Confer. on Transport, Environ. and Civil Eng., Kuala Lumpur, Malaysia, 2012.

Google Scholar

[23] B.K. Suyamboo, R.S. Perumal, Iranica J. of Energy & Environ., 3(1) (2012) 23-34.

Google Scholar

[24] M. Hachkar, A.B. Karim, B. Mounir, M. Bakasse, A. Yaacoubi, Canad. J. Environ. Construc. and Civil Eng., 2 (2011) 2-14.

Google Scholar

[25] N. Gupta, A.K. Kushwaha, M.C. Chattopadhyaya, J. Chem. Pharm. Res., 2(6) (2010) 34-45.

Google Scholar

[26] T.W Weber, R.K. Chakkravorti, AlChE. J., 20 (1974) 228-238.

Google Scholar

[27] V. Vijayakumaran, S. Arivoli, J. Mater. Environ. Sci., 33 (2012) 525-536.

Google Scholar

[28] H. Freundlich, Phys. Chem. Soc., 40 (1906) 1361-1368.

Google Scholar

[29] O. Tunc, H. Tanac, Z. Aksu, J. Hazard, Mater., 163 (2009) 187-198.

Google Scholar

[30] M.J. Temkin, V. Pyzhev, Acta Physiochim, URSS., 12 (1940) 217-222.

Google Scholar

[31] V. Mehdi, A. Marjan, Z. Marjan, J.Y. Bita, J. Phys. Theor. Chem. 7(2) (2010) 95-104.

Google Scholar

[32] B. Emrah, O.Z. Mahmut, S.I. Ayhan, Microporous and Mesoporous Materials., 115 (2008) 234–246.

Google Scholar

[33] M.H. Baek, C.O. Ijagbemi, D.S. Kim, J. Hazard. Mater., 174 (2010) 746–755.

Google Scholar

[34] H. Tahir, Q. Jahanzeb, M. Sultan, Afr. J. Biotechnol., 7(21) (2008) 3906-3911.

Google Scholar

[35] S. Veli, B. Alyuz, J. Hazard. Mater., 149 (2007) 226-233.

Google Scholar

[36] A. Kausar, H.N. Bhatti, G. MacKinnon, Colloids and Surfaces B., 111 (2013) 124–133.

Google Scholar

[37] C.A. Basar, J. Hazard. Mater., 135 (2006) 232-241.

Google Scholar

[38] S.Y. Elovich, O.G. Larionov, Izv. Akad. Nauk. SSSR, Otd. Khim., 2 (1962) 209-218.

Google Scholar

[39] B.A. Fil, M.T. Yilmaz1, S. Bayar, M.T. Elkoca, Brazilian J. Chem. Eng., 31(1) (2014) 171–182.

Google Scholar

[40] C. Theivarasu, S. Mylsamy, E-J. of Chem., 8(S1) (2011) 363-371.

Google Scholar

[41] K. Ada, A. Ergene, S. Tan, E. Yalcin, J. Hazard. Matter., 165 (2009) 637-644.

Google Scholar

[42] B.K. Nandi, A. Goswami, M.K. Purkait, Appl. Clay. sci., 42 (2008) 583-590.

Google Scholar