@article{ART002374723},
author={ 장영재 and 이찬주 and 강성욱 },
title={연마재 작업조건에 따른 폴리우레탄 재질의 마모량 예측에 관한 연구},
journal={한국기계기술학회지},
issn={1229-604X},
year={2018},
volume={20},
number={4},
pages={528-534},
doi={10.17958/ksmt.20.4.201808.528},
url={http://dx.doi.org/10.17958/ksmt.20.4.201808.528}

TY - JOUR
AU - 장영재
AU - 이찬주
AU - 강성욱
TI - 연마재 작업조건에 따른 폴리우레탄 재질의 마모량 예측에 관한 연구
T2 - 한국기계기술학회지
PY - 2018
VL - 20
IS - 4
PB - 한국기계기술학회
SP - 528-534
SN - 1229-604X
AB - In this study, the amount of abrasive wear was predicted effectively by FE simulation and experiment regarding the material and shape of the abrasive. In order to calculate numerically the amount of wear using the Archard wear equation, the normal load between the abrasive and the polyurethane was calculated by FE simulation. The sliding distance can be calculated according to the working conditions, and the hardness of the polyurethane is a known value. The wear coefficient K was calculated inversely by experimental measurement of the wear amount according to the working conditions of the abrasive. In order to verify the proposed calculation method, the wear amount was calculated by using the Archard wear equation by applying the calculated wear coefficient K with regard to arbitrary working conditions. The deviation between the proposed calculation results and the experimental results was within 10%. When the wear coefficient K is calculated by using the proposed method, the wear amount can be estimated. In addition, it was found that the change of the vertical load value concerning penetration depth was the main factor for determining wear amount.
KW - Abrasive(연마재), Wear(마모), Archard wear equation(아차드 마모식), Finite element method(유한요소법), Wear coefficient(마모 계수)
DO - 10.17958/ksmt.20.4.201808.528
UR - http://dx.doi.org/10.17958/ksmt.20.4.201808.528
ER -

장영재 , 이찬주 and 강성욱 . 2018, “연마재 작업조건에 따른 폴리우레탄 재질의 마모량 예측에 관한 연구”, 한국기계기술학회지, vol. 20, no. 4, pp. 528-534. Available from: doi:10.17958/ksmt.20.4.201808.528

장영재 이찬주 et al. 강성욱 “연마재 작업조건에 따른 폴리우레탄 재질의 마모량 예측에 관한 연구” 한국기계기술학회지 20.4 pp. 528-534 (2018): 528.

장영재 , 이찬주 , 강성욱 . 연마재 작업조건에 따른 폴리우레탄 재질의 마모량 예측에 관한 연구 한국기계기술학회지 [Internet]. 2018; 20( 4), : 528-534. Available from: doi:10.17958/ksmt.20.4.201808.528

장영재 , 이찬주 and 강성욱 . “연마재 작업조건에 따른 폴리우레탄 재질의 마모량 예측에 관한 연구” 한국기계기술학회지 20, no.4 (2018): 528-534. doi: 10.17958/ksmt.20.4.201808.528