초록

This paper investigates the relationship between the waveform area and fuel injection quantity. It is on developing on analysis method of waveform the effect of waveform area on fuel injection quantity of CRDI Diesel engine. The experimental methods using Pico oscilloscope and fuel injection tester are employed to measure current and voltage waveform and fuel injection quantity of solenoid injector. The one normal and two abnormal solenoid injectors are used. The experiment is carried out during no-load condition. A summary of the important results are as follows. 1) The area of the voltage and current waveform of the abnormal injector becomes larger than the that of normal injector, and the area of the current and voltage waveform is inversely proportional to the fuel injection quantity. 2) The area of the current waveform can be obtained more accurate results than that of voltage waveform. 3) It is possible to infer the fuel injection quantity by measuring the current waveform and calculating the area.

키워드

솔레노이드 밸브, 인젝터 제어 회로, 연료 분사량, CRDI 디젤기관, 전압파형 면적, 전류파형 면적

참고문헌(5)open

  1. [학술지] 강성구 / 2017 / CRDI 디젤 엔진의 솔레노이드 인젝터 불량에 따른 파형 분석에 관한 실험적 연구 / 한국기계기술학회지 19 (3) : 366 ~ 371

  2. [학술지] 유종식 / 2013 / 노후 차량의 배기가스 측정을 이용한 산소센서, 인젝터, 점화2차파형의 파형분석 연구 / 한국자동차공학회 논문집 21 (5) : 151 ~ 156

  3. [학술지] 홍석기 / 2013 / 가솔린 자동차의 유효방전에너지와 인젝터 파형의 상호 관련성 연구 / 한국기계기술학회지 15 (5) : 767 ~ 772

  4. [인터넷자료] / http://www.ekouhou.net/disp-A, 2012-159049.html

  5. [기타] / Pico Scope 4425 Manual