A task for laser cutting of lamellae with TruLaser 1030
DOI:
https://doi.org/10.17770/etr2015vol1.222Keywords:
laser technology, laser cutting, electrical steelAbstract
The growing development of manufacturing, automotive, aerospace and other sectors in the industry generates the necessity to continuously expanding on modifications of electrical machinery and equipments which are used in them, as well as to improve their performance and reliability. The report presents some results from a study to the process of laser cutting through melting on lamellae for rotor and stator packages by using the laser system TruLaser 1030. Some functional dependencies are offered between physical quantities describing the cutting process by melting and technological parameters aimed providing the quality requirements. With a software TruTops to optimize the cutting out are shown the results of studies to determine the technological working time for cutting of a concrete stator lamella.
Downloads
References
G. Pasquarella, Innovation als Antrieb Stator- und Rotorpakete für Elektrische mMaschinen Prototypen und Vorserien., LCD LaserCut AG
T. Himmer, Hochwertig Schneiden mit CO2 und Feiberlasern, Blech Inform 3/2007 pp 50-53
L. Matthias, T. Himmer, Remote-Schneiden mit dem Faserlaser ermöglicht hohe Konturgeschwin-digkeiten,http://www.maschinenmarkt.vogel.de/themenkanaele/produktion/trenntechnik/articles/146592/
Fraunhofer-Institut, IWS demonstriert Vorteile beim Laser-Remote-Schneiden, Lasys 2008 http://www.blechnet.com/themen/zulieferungen/articles/105024/
Deneva H., A Study on Laser Cutting Process of Lamellae for Rotor and Stator Packages. Disertation 2014, TU - Gabrovo, pp.160
Sublimation cutting, Trumpf-laser http://www.us.trumpf.com/en/products/laser-technology/solutions/applications/laser-cutting/sublimation-cutting.html
Schuöcker, D. Handbook of the EuroLaser Academy, Chapman&Hall, London, 1998, ISBN 0412819201.
Вейко, В. П. Технологические лазеры и лазерное излучение, Санкт-Петербург, ИТМО, 2007, 52с
Mai, T. A., B. Ric, Laser-Microjet: das ideale Werkzeug für Präzisionsmikrobearbeitung.pdf, Oktober 2005,www.synova.ch
LCD LaserCut AG, Laserschneiden und Paketieren von
dünnen Blechen bis 0.1mm http://www.lcd-lasercut.ch/
Lazov, L., H. Deneva. Investigation of Cutting Width from Laser Power and Velocity. IJETCAS, Issue 4, Vol 1, 2 & 3, March – May, 2013, ISSN 2279-0047
Lazov, L., H. Deneva. Investigation on the Influence of the Process Parameters Power and Velocity to Laser Cutting of Lamellae. Bulgarian National Conference on Physics, Plovdiv 10-12.10.2014 (in the press)
http://www.splav-kharkov.com/main.php
Ленгеров, А., Г. Николчева, П. Даскалов. Изследване на режимите на рязане при обработка на детайли с наварени повърхнини, 10 Международна научно-техническа конференция АМО, 27-29 юни 2010, стр.146.
