References
Pegna J (1997) Exploratory investigation of solid freeform construction. Autom Constr 5:427–437. https://doi.org/10.1016/S0926-5805(96)00166-5
Khoshnevis B (2004) Automated construction by contour crafting—related robotics and information technologies. Autom Constr 13:5–19. https://doi.org/10.1016/j.autcon.2003.08.012
Le TT, Austin SA, Lim S et al (2012) Mix design and fresh properties for high-performance printing concrete. Mater Struct 45:1221–1232. https://doi.org/10.1617/s11527-012-9828-z
Buswell RA, Soar RC, Gibb AG, Thorpe A (2007) Freeform construction: mega-scale rapid manufacturing for construction. Autom Constr 16:224–231. https://doi.org/10.1016/j.autcon.2006.05.002
Roussel N (2006) A thixotropy model for fresh fluid concretes: Theory, validation and applications. Cem Concr Res 36:1797–1806. https://doi.org/10.1016/j.cemconres.2006.05.025
Roussel N, Ovarlez G, Garrault S, Brumaud C (2012) The origins of thixotropy of fresh cement pastes. Cem Concr Res 42:148–157. https://doi.org/10.1016/j.cemconres.2011.09.004
Flatt RJ (2004) Dispersion forces in cement suspensions. Cem Concr Res 34:399–408. https://doi.org/10.1016/j.cemconres.2003.08.019
Flatt RJ, Bowen P (2006) Yodel: a yield stress model for suspensions. J Am Ceram Soc 89:1244–1256. https://doi.org/10.1111/j.1551-2916.2005.00888.x
Perrot A, Rangeard D, Pierre A (2016) Structural built-up of cement-based materials used for 3D-printing extrusion techniques. Mater Struct 49:1213–1220. https://doi.org/10.1617/s11527-015-0571-0
Wangler T, Flatt RJ (2018) First RILEM international conference on concrete and digital fabrication–digital concrete 2018, RILEM Bookseries, vol 19. Springer, Berlin. https://doi.org/10.1007/978-3-319-99519-9
Bos FP, Lucas SS, Wolfs RJM, Salet TA (2020) Second RILEM international conference on concrete and digital fabrication: digital concrete 2020, RILEM Bookseries, vol 28. Springer Nature. https://doi.org/10.1007/978-3-030-49916-7
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
This commentary is part of our celebration of 75 years of RILEM, highlighting Materials and Structures most highly influential and cited publications.
Highlighted paper: Le, T. T. et al. Mix design and fresh properties for high-performance printing concrete. 2012 Materials and Structures. 45(8), pp. 1221–1232.
Rights and permissions
About this article
Cite this article
Perrot, A. M&S highlight: Le et al. (2012), Mix design and fresh properties for high-performance printing concrete. Mater Struct 55, 42 (2022). https://doi.org/10.1617/s11527-021-01855-y
Received:
Accepted:
Published:
DOI: https://doi.org/10.1617/s11527-021-01855-y