Abstract
Biodegradable polymers can be utilized as templates for cell transplantation and regeneration of metabolic organs and structural tissues. Candidate materials must be adhesive substrates for cells, promote cell growth and allow for retention of cell function. However, the processing requirements of such materials into highly porous three-dimensional structures with large surface per volume and an interconnecting pore network limits their potential application for tissue regeneration. A new processing technique was developed to produce uniform, three-dimensional cell transplantation devices of poly(lactic-co-glycolic acid). The process involved the preparation of highly porous membranes by a solvent-casting and particulate-leaching technique followed by their lamination. The device structural and mechanical properties depended on those of their constituent membranes, as evaluated by mercury porosimetry, scanning electron microscopy, and thermomechanical analysis. Cells to be seeded into the devices were injected from catheters incorporated within their structure. In vitro studies with model suspensions of dyed microspheres allowed for visual evaluation of the internal pore structure of various layered devices. From these studies, numerous parameters of device design for cell seeding were determined including pore size and injection rate. The membrane lamination technique produced devices without interfaces between layers as determined by microsphere injection and scanning electron microscopy.
Similar content being viewed by others
References
L.G. Cima, D.E. Ingber, J.P. Vacanti, and R. Langer, “Hepatocyte Culture on Biodegradable Polymeric Substrates,” Biotechn. Bioeng., 38, 145–158 (1991).
R. Langer, L.G. Cima, J.A. Tamada, and E. Wintermantel, “Future Directions in Biomaterials,” Biomaterials, 11, 738–745 (1990).
J.P. Vacanti, M.A. Morse, W.M. Saltzman, A.J. Domb, A. Perez-Atayde, and R. Langer, “Selective Cell Transplantation Using Bioabsorbable Artificial Polymers as Matrices,” J. Pediatr. Surg., 23, 3–9 (1988).
J.P. Vacanti, “Beyond Transplantation,” Arch. Surg., 123, 545–549 (1988).
W.T. Green, Jr., “Articular Cartilage Repair: Behavior of Rabbit Chondrocytes During Tissue Culture and Subsequent Allografting,” Clin. Orth. Rel. Res., 124, 237–250 (1977).
C.A. Vacanti, R. Langer, B. Schloo, and J.P. Vacanti, “Synthetic Polymers Seeded with Chondrocytes Provide a Template for New Cartilage Formation,” Plast. Reconstr. Surg., (in press).
I.V. Yannas, “Regeneration of skin and nerve by use of collagen templates,” Collagen III, M.E. Nimni (ed.), CRC Press, Boca Raton, 1988.
L.G. Cima, J.P. Vacanti, C. Vacanti, D. Ingber, D. Mooney, and R. Langer, “Tissue Engineering by Cell Transplantation Using Degradable Polymer Substrates,” J. Biomech. Eng., 113, 143–151 (1991).
A.G. Mikos, A.J. Thorsen, L.A. Czerwonka, Y. Bao, L.G. Cima, D.N. Winslow, and R. Langer, “Preparation and characterization of poly(L-lactic acid) foams for cell transplantation,” Macromolecules (in preparation).
A.G. Mikos, G. Sarakinos, and R. Langer, “Lamination of highly-porous biodegradable membranes for the construction of three-dimensional foams,” J. Biomed. Mater. Res. (in preparation).
H.L. Wald, G. Sarakinos, A.G. Mikos, and R. Langer, “Cell Seeding in Porous Transplantation Devices,” J. Biomed. Mater. Res. (submitted).
Acknowledgements
This work was supported by a grant from Neomorphics, Inc. H. Wald would like to acknowledge the support of a National Science Foundation Graduate Fellowship.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mikos, A.G., Wald, H.L., Sarakinos, G. et al. Biodegradable Cell Transplantation Devices for Tissue Regeneration. MRS Online Proceedings Library 252, 353–358 (1991). https://doi.org/10.1557/PROC-252-353
Published:
Issue Date:
DOI: https://doi.org/10.1557/PROC-252-353