Abstract
Progress in sintering process and improvement of mechanical properties of silicon nitride ceramics are reviewed. Emphases are placed on contributions of advanced sintering techniques and better understanding of sintering additives and microstructure–properties relations. Current applications as engine components and cutting tools are described, and future prospect is considered.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
M. Mitomo and Y. Tajima, J. Ceram. Soc. Jpn. 99, 1014 (1991).
Y. Matsuo, in Hot Isostatic Pressing: Theory and Applications, edited by K. Koizumi (Elsevier Science Publishers, New York, 1992), p.49.
Y. Tajima, K. Urashima, M. Watanabe and Y. Matsuo, in Ceramic Transactions, Vol. 1, edited by G.L. Messing, E.R. Fuller and H. Hausner (The American Ceramic Society, Inc., Ohio, 1988), p.1034.
T. Kawashima, H. Okamoto, H. Yamamoto and A. Kitamura, J. Ceram. Soc. Jpn. 99, 320 (1991).
I. Tanaka, G. Pezzoti, T. Okamoto and Y. Miyamoto, Ceram. Eng. Sci. Proc. 10, 817 (1989).
Y. Tajima, K. Mizuno, K. Matsubara and M. Watanabe, in Proc. of the 1st Int. Symp. on the Science of Engineering Ceramics, edited by S. Kimura and K. Niihara (The Ceramic Society of Japan, Tokyo, 1991), p.95.
K. Matsubara, K. Mizuno, Y. Tajima and M. Watanabe, presented at the Basic Science Division Meeting of the Ceramic Society of Japan, Osaka, Japan, 1992 (unpublished).
K. Urashima, Y. Tajima and M. Watanabe, in Fracture Mechnics of Ceramics, Vol. 9, edited by R.C. Bradt et al. (Plenum Press, New York, 1992), p.235.
Y. Maniette, M. Inagaki and M. Sakai, J. Europ. Ceram. Soc. 7, 255 (1991).
C-W. Li and J. Yamanis, Ceram. Eng. Sci. Proc. 10, 632 (1989).
K. Urashima, Y. Tajima, M. Enoki and T. Kishi, submitted to J. Am. Ceram. Soc.
Y. Hattori, Y. Tajima, K. Yabuta, Y. Matsuo, M. Kawamura and T. Watanabe, in Ceramic Materials and Components for Engines, edited by W. Bunk and H. Hausner (German Ceramic Society, 1986), p.165.
K. Katayama, T. Watanabe and K. Matoba, SAE Paper 861128 (1986).
K. Matoba, K. Katayama, M. Kawamura and T. Mizuno, SAE Paper 880702 (1988).
I. Matsuo and F. Nishiguchi, SAE Paper 880703 (1988).
M. Ito, N. Ishida and N. Kato, SAE Paper 880704 (1988).
B. Kitayama, Internal Combustion Engine 26, 77 (1987).
C. Baker, R. Kobayashi and D. Baker, SAE Paper 890426 (1989).
T. Shimizu, K. Takama, H. Enokishima, K. Mikame, S. Tsuji and N. Kamiya, SAE Paper 900656 (1990).
O. Kamigaito, in Ceramics Engine, (Maruzen Ltd., Tokyo, 1987), p.92.
H. Matsuoka, H. Kawamura and S. Toeda, SAE Paper 840426 (1984).
S. Kamiya, M. Murachi, H. Kawamoto, S. Kato, S. Kawakami and Y. Suzuki, SAE Paper 850523 (1985).
Y. Tsukawaki, K. Shimono and M. Shigetsu, SAE Paper 861408 (1986).
K. Tashiro, I Tanaka, N. Miyamura and S. Nagano, J. Soc. Automotive Eng. Jpn. 39, 1179 (1985).
M. Kano, J. Jpn. Soc. Tribologists 34, 131 (1989).
L.R. Anderson, Cutting Tool Eng. [4], 65 (1990).
H.K. Tonshoff and S. Bartsch, Can. Metall. Quart. 28, 353 (1989).
J. Aucote and S.R. Foster, Mat. Sci. Tech. [2], 700 (1986).
H. Tanaka, in Proc. of the 1st Int. Symp. on the Science of Engineering Ceramics, edited by S. Kimura and K. Niihara (The Ceramic Society of Japan, Tokyo, 1991), p.565.
K. Izaki, K. Hakkai, K. Ando, T. Kawakami and K. Niihara, in Ultrastructure Processing of Advanced Ceramics, edited by J.D. Mackenzie and D.R. Ulrich (John Wiley & Sons, New York, 1988), p.891.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Tajima, Y. Development of High Performance Silicon Nitride Ceramics and Their Applications. MRS Online Proceedings Library 287, 189–196 (1992). https://doi.org/10.1557/PROC-287-189
Published:
Issue Date:
DOI: https://doi.org/10.1557/PROC-287-189