Abstract
The effects of indenter tip rounding on the shape of indentation loading curves have been analyzed using dimensional and finite element analysis for conical indentation in elastic-perfectly plastic solids. A method for obtaining mechanical properties from indentation loading curves is then proposed. The validity of this method is examined using finite element analysis. Finally, the method is used to determine the yield strength of several materials for which the indentation loading curves are available in the literature.
Similar content being viewed by others
References
D. Tabor, Philos. Mag. A74, 1207 (1996).
J. B. Pethica, R. Hutchings, and W. C. Oliver, Philos. Mag. A48, 593 (1983).
D. Stone, W. R. LaFontaine, P. Alexopoulos, T. W. Wu, and Che-Yu Li, J. Mater. Res. 3, 141 (1988).
B. Bhushan, A. Kulkarni, W. Bonin, and J. Wyrobek, Philos. Mag. A74, 1117 (1996).
W. C. Oliver and G. M. Pharr, J. Mater. Res. 7, 1564 (1992).
M. F. Doerner and W. D. Nix, J. Mater. Res. 1, 601 (1986).
A. K. Bhattacharya and W. D. Nix, Int. J. Solids Structures 24, 881 (1988).
T. A. Laursen and J. C. Simo, J. Mater. Res. 7, 618 (1992).
K. Zeng, A. E. Giannakopoulos, and D. J. Rowcliffe, Acta Metall. Mater. 43, 1945 (1995).
A. Bolshakov, W. C. Oliver, and G. M. Pharr, J. Mater. Res. 11, 760 (1996).
J. L. Loubet, J. M. Georges, and J. Meille, in Microindentation Techniques in Materials Science and Engineering, edited by P. J. Blau and B. R. Lawn (American Society for Testing and Materials, Philadelphia, PA, 1986), p. 72.
S. V. Hainsworth, H. W. Chandler, and T. F. Page, J. Mater. Res. 11, 1987 (1996).
B. Rother, Surf. Coat. Technol. 86–87, 535 (1996).
Y-T. Cheng and C-M. Cheng, Analysis of indentation loading curves obtained using conical indenters, General Motors Research and Development Center Publication R&D-8665 (May 9, 1997); Philos. Mag. Lett. 77, 39 (1998).
Y-T. Cheng and C-M. Cheng, Scaling laws in conical indentation of elastic-perfectly plastic solids, General Motors Research and Development Research Publication R&D-8689 (June 23, 1997); Int. J. Solids Structures (in press).
ABAQUS, Hibbitt, Karlsson & Sorensen, Inc. (Pawtucket, RI 02860, USA).
T. Suzuki and T. Ohmura, Jpn. J. Tribology 40, 151 (1995).
Y-M. Chen, A. W. Ruff, and J. W. Dally, J. Mater. Res. 9, 1314 (1994).
K. Tanaka and H. Koguchi, Jpn. J. Tribology 40, 129 (1995).
Y. Murakami, K. Tanaka, M. Itokazo, and A. Shimamoto, Philos. Mag. A69, 1131 (1994).
K. L. Johnson, Contact Mechanics (Cambridge University Press, Cambridge, 1985).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cheng, YT., Cheng, CM. Further analysis of indentation loading curves: Effects of tip rounding on mechanical property measurements. Journal of Materials Research 13, 1059–1064 (1998). https://doi.org/10.1557/JMR.1998.0147
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1998.0147