Abstract
Fine pitch area array packages are often assembled to flexible printed circuit boards, which require numerous low-frequency mechanical deflections. The interconnect package reliability emphasis has become focused more on isothermal bending fatigue. The interconnect failures due to bending fatigue were found to be different than those which occur if the packages were subjected to accelerated temperature cycling. A test method has been developed to evaluate isothermal mechanical bending fatigue reliability of area array packaging. Mechanical fatigue results of 1.0, 0.8, and 0.75 mm pitch packaging will be presented, demonstrating the effect of package substrate material properties on fatigue life and fracture morphology. Numerical finite element analysis results will also be presented to support and expand the findings in this study.
Similar content being viewed by others
References
Wild, R., “Some Fatigue Properties of solders and solder Joints,” Inter Nepcon, Oct. 1975.
Solomon, H., “Fatigue of 60/40 Solder,” IEEE Trans. Comp. Hybrids Manuf. Technol., Vol. CHMT-9, 1986, pp. 423–432.
Brown, V. L., Lach, L. E., and Leicht, J. L., “A New Land Grid Array Package Family: An Industry Standard High Pin-Out Packaging Concept,” Proceedings of the 1992 IEPS, Austin Texas, Sept. 30, pp. 310-340.
Darveaux, R. and Mawer, A., “Thermal and Power Cycling Limits of Plastic Ball Grid Array (PBGA) Assemblies,” Surface Mount Int’l., San Jose, August 29-31, 1995, pp. 315–326.
Skipor, A. F., Harren, S. V., and Botisis, J., “On the Constitutive Response of 63/37 Sn/Pb Eutectic Solder,” ASME J. of Engineering Materials Technology, Vol. 118, January 1996, pp. 1–11.
Leicht, Larry and Skipor, Andrew, “Mechanical Cycling Fatigue of PBGA Package Interconnects,” IMAPS Conf., San Diego, Ca, 1998, pp. 802–807.
Harvey, Ian R., David Turner, Jim Ortowski, and Jim Herbert, “Strategy for Characterizing and Minimizing Effects of Tensile Stress in CSP’s as Induced by Board Flexure,” Boston IMAPS Conference, Sept. 20-22, 2000, pp. 1–8.
Wu, J. D., Ho, S. H., Zheng, P. J., Liao, C. C., and Hung, S. C., “An Experimental Study of Failure and Fatigue Life of a Stacked CSP Subjected to Cyclic Bending,” Electronic Components and Technology Conference, May 2001, Orlando, Florida.
www.mts.com.
www.ansys.com.
ANSYS™ Theory Reference, version 5.6, Chapter 4, Structures with Material Nonlinearities.
Brown, Eric and Sottos, Nancy, “Thermo-elastic Properties of Plain Weave Composites for Multilayer Circuit Board Applications,” UIUC TAM Report No. 878, UILU-ENG-98-6004, February 1998.
Timoshenko, S. and Woinowski-Krieger, S., Theory of Plates and Shells, McGraw-Hill (New York, 1987), pp. 51–111.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Skipor, A.F., Leicht, L. Mechanical Bending Fatigue Reliability and Its Application to Area Array Packaging. MRS Online Proceedings Library 682, 56 (2001). https://doi.org/10.1557/PROC-682-N5.6
Published:
DOI: https://doi.org/10.1557/PROC-682-N5.6