Abstract
By laser metal deposition (LMD) samples from Fe–28Al (at.%) have been built on iron and various steels. Chemically graded iron aluminium and Fe–28Al/steel samples were fabricated with intended concentration gradients by controlling the feed rates of the powders. All samples were subsequently heat treated at 700 °C for 1000 h to study possible reactions between Fe–28Al and the steels and the long-term stability of the composition gradients. Microstructures were characterized by scanning electron microscopy (SEM) and concentration profiles along the building direction were analysed by energy- and wavelength-dispersive spectrometry (EDS, WDS).
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
T. Durejko, S. Lipinski, Z. Bojar, J. Bystrzycki, Mater. Design, 32, 2827 (2011).
I. Shishkovsky, F. Missemer, N. Kakovkina, I. Smurov, Crystals, 3, 517 (2013).
J.H. Abboud, R.D. Rawlings, D.R.F. West, J. Mater. Sci., 30, 5931 (1995).
C. Shen et al., Metall. Mater. Trans., 47B, 763 (2015).
T. Durejko, M. Zietala, W. Polkowski, T. Czujko, Mater. Design, 63, 766 (2014).
G. Rolink et al., J. Mater. Res., 29, 2036 (2014).
D. Risanti et al., Intermetallics, 13, 1337 (2005).
M. Palm, J. Alloys Compd., 252, 192 (1997).
Ternary Alloys Vol. 5: Al-Cu-S - Al-Gd-Sn, edited by G. Petzow and G. Effenberg (VCH Weinheim1992).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lotfian, S., Rolink, G., Weisheit, A. et al. Chemically graded Fe–Al/steel samples fabricated by laser metal deposition. MRS Advances 2, 1393–1398 (2017). https://doi.org/10.1557/adv.2017.124
Published:
Issue Date:
DOI: https://doi.org/10.1557/adv.2017.124