Abstract
The mechanical properties of four polymer coatings on aluminum foil substrates are examined using nanoindentation with a Hysitron Triboscope, an add-on to an AFM. In addition to static hardness and modulus measurements, the viscoelastic properties of the films, which differ in Tg and extent of crosslinking, are investigated by employing two techniques: using nanoindentation parameters to fit the creep response of the material to a one-dimensional equation based on a three-element Zener model of the viscoelastic behavior of the polymer; and fitting the creep response of the material to a previously developed, three-dimensional model of the response of a viscoelastic material to indentation by a spherical indenter. It is found that the measured static moduli are about 1.5 times greater than results of fitting creep data to the 1-D model, and are a factor of 3-6 times greater than those obtained by fits of the 3-D model.
Similar content being viewed by others
References
M. F. Doerner and W. D. Nix, J. Mater. Res. 1, 601 (1986).
W. C. Oliver and G. M. Pharr, J. Mater. Res. 7, 1564 (1992).
N. G. McCrum, C. P. Buckley, and C. B. Bucknall, Principles of Polymer Engineering, Oxford University Press, New York, 1995, p. 126.
I. M. Ward, Mechanical Properties of Solid Polymers, John Wiley and Sons, New York, 1983, p. 93.
L. Cheng, L. E. Scriven, and W. W. Gerberich, In Fundamentals of Nanoindentation and Nanotribology Symposium, MRS Spring Meeting, San Fransisco (1998).
L. Cheng (private communication).
K. B. Yoder, D. S. Stone, R. A. Hoffman, and J. C. Lin, in press.
T. Y. Tsui, W. C. Oliver, and G. M. Pharr, J. Mater. Res. 11, 752 (1996).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yoder, K.B., Ahuja, S., Dihn, K.T. et al. Nanoindentation of Viscoelastic Materials: Mechanical Properties of Polymer Coatings on Aluminum Substrates. MRS Online Proceedings Library 522, 205–210 (1998). https://doi.org/10.1557/PROC-522-205
Published:
Issue Date:
DOI: https://doi.org/10.1557/PROC-522-205