Abstract
We have developed a new technique for measuring the adhesion of brittle films to ductile substrates. In this technique, a wedge indenter is driven through the brittle coating and into the underlying substrate. Plastic deformation of the substrate causes the coating to delaminate from the substrate. The width of the delaminated area can be directly related to the interface toughness. We present a simple analysis of this technique and apply it to diamond-coated titanium. The toughness of the diamond-titanium interface as measured with this wedge delamination technique is approximately 51 ± 11 J/m2. XPS measurements reveal that a reaction layer of titanium carbide forms between the diamond coating and the titanium substrate. Delamination of the coating occurs by crack propagation in this reaction layer and in the diamond film itself. These observations agree well with nanoindentation measurements performed in the delaminated area of the substrate.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
M. G. Allen and S. D. Senturia, J. Adhesion 25, 303 (1988).
M. G. Allen and S. D. Senturia, J. Adhesion 29, 219 (1989).
Y. Z. Chu and C. J. Durning, J. Appl. Polym. Sci. 47, 1151–1164 (1992).
A. Bagchi, G. E. Lucas, Z. Suo, and A. G. Evans, J. Mater. Res. 9, 1734–1741 (1994).
E. O. Shaffer II, F. J. McGarry, and F. Trusell, in Thin Films: Stresses and Mechanical Properties IV, edited by P. H. Townsend, T. P. Weihs, J. E. Sanchez, Jr., and P. Børgesen (Mater. Res. Soc. Symp. Proc. 308, Pittsburgh, PA, 1993), pp. 535–539.
E. O. Shaffer II, S. A. Sikorski, and F. J. McGarry, in Materials Reliability in Microelectronics IV, edited by P. Børgesen, J. C. Coburn, J. E. Sanchez, Jr., K. P. Rodbell, and W. F. Filter (Mater. Res. Soc. Symp. Proc. 338, Pittsburgh, PA, 1994), pp. 541–551.
A. G. Evans and J. W. Hutchinson, Int. J. Solids Structures 20, 455–466 (1984).
D. B. Marshall and A. G. Evans, J. Appl. Phys. 56, 2632–2638 (1984).
C. Rossington, A. G. Evans, D. B. Marshall, and B. T. Khuri-Yakub, J. Appl. Phys. 56, 2639–2644 (1984).
M. D. Drory and J. W. Hutchinson, Science 263, 1753 (1994).
M. D. Drory and J. W. Hutchinson, Proc. Roy. Soc. 452, 2319 (1996).
K. L. Johnson, J. Mech. Phys. Solids 18, 115 (1970).
T. O. Mulhearn, J. Mech. Phys. Solids 7, 85 (1959).
W. Hirst and M. G. J. W. Howse, Proc. Roy. Soc. A 311, 429–444 (1968).
S. P. Timoshenko and J. N. Goodier, Theory of Elasticity (McGraw-Hill, Inc., New York, 1987).
R. Hill, The Mathematical Theory of Plasticity, Oxford Engineering Science (Oxford University Press, Oxford, 1950).
K. L. Johnson, Contact Mechanics (Cambridge University Press, Cambridge, 1985).
D. Tabor, Hardness of Solids (Oxford University Press, Oxford, 1951).
J. W. Ager, G. Conti, and M. D. Drory, unpublished research.
M. F. Doerner and W. D. Nix, J. Mater. Res. 1, 601–609 (1986).
M. F. Doerner, Mechanical properties of metallic thin films on substrates using sub-micron indentation methods and thin film stress measurements techniques, Ph.D. Thesis, Stanford University (1987).
W. C. Oliver and G. M. Pharr, J. Mater. Res. 7, 1564–1583 (1992).
G. E. Dieter, Mechanical Metallurgy (McGraw-Hill, New York, 1986).
S. S. Perry, J. W. Ager, G. A. Somorjai, R. J. McClelland, and M. D. Drory, J. Appl. Phys. 74, 7542 (1993).
L. Ramqvist, K. Hamrin, G. Johansson, A. Fahlman, and C. Nordiling, J. Phys. Chem. Solids 30, 1835 (1969).
H. Ihara, Y. Kumashiro, A. Itoh, and K. Maeda, Jpn. J. Appl. Phys. 12, 1462 (1973).
Handbook of X-ray Photoelectron Spectroscopy, edited by J. F. Moulder, W. F. Stickle, P. E. Sobol, and K. D. Bomben (Perkin-Elmer, Eden Prairie, MN, 1992).
M. D. Drory, NIST Spec. Publ. 885, pp. 313–320 (1995).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Vlassak, J.J., Drory, M.D. & Nix, W.D. A simple technique for measuring the adhesion of brittle films to ductile substrates with application to diamond-coated titanium. Journal of Materials Research 12, 1900–1910 (1997). https://doi.org/10.1557/JMR.1997.0260
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1997.0260