Abstract
The XeCl laser ablation of a polyetheretherketone (PEEK)-carbon fiber composite (APC-2) is reported. Etch rates and measurements of the ablation products have been carried out, together with scanning electron microscope evaluation of the etch craters. Selective removal of the PEEK matrix occurs for fluences ∼70–400 mJ cm−2. Net composite etching commences at ∼420 mJ cm−2, with an etch rate above this value that is determined by the carbon fibers and is consistent with thermal vaporization at high temperature (≥4000 K).
Similar content being viewed by others
References
R. Srinivasan, Science 234, 559 (1986).
See, for example, Thermal and Optical Interactions with Biological and Related Composite Materials, edited by M. J. Berry and G.M. Harpole, Proc. SPIE 1064 (1989).
M. Wehner, R. Poprawe, and F. J. Trasser, in Excimer Lasers and Applications, Proc. SPIE 1023, 179 (1989).
G. M. Proudley and P. H. Key, in High Power Lasers and Laser Machining Technologies, Proc. SPIE 1132, 111 (1989).
H. Niino, M. Nakano, S. Nagano, H. Nitta, K. Yano, and A. Yabe, J. Photopolymer Sci. Technol. 3, 53 (1990).
P. E. Dyer, G. A. Oldershaw, and D. Schudel, Appl. Phys. B 51, 314 (1990).
A. J. Whittaker, R. Taylor, and H. Tawil, Proc. R. Soc. London A 430, 167 (1990).
M. Rothschild, C. Arnone, and D. J. Ehrlich, J. Vac. Sci. Technol. B 4, 310 (1986).
H. Okabe, Photochemistry of Small Molecules (Wiley, New York, 1978).
J. F. Ready, Effects of High Power Laser Radiation (Academic Press, London, 1971).
JANAF Thermochemical Tables, 2nd ed. (National Bureau of Standards, U.S. Department of Commerce, 1971).
C. A. Klein, M. J. Berry, and P. A. Miles, J. Appl. Phys. 65, 3425 (1989).
G.W.C. Kaye and T.H. Laby, Tables of Physical and Chemical Constants, 14th ed. (Longman, London, 1978).
R.W. Dreyfus, R. Kelly, R. E. Walkup, and R. Srinivasan, in Excimer Lasers and Optics, Proc. SPIE 710, 46 (1986).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Dyer, P.E., Lau, S.T., Oldershaw, G.A. et al. An investigation of XeCl laser ablation of polyetheretherketone (PEEK)-carbon fiber composite. Journal of Materials Research 7, 1152–1157 (1992). https://doi.org/10.1557/JMR.1992.1152
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1992.1152