Title: Combined Bending and Axial Load in Prestressed Concrete Columns
Date: June, 1967
Volume: 12
Issue: 3
Page number: 52-59
Author(s): Paul Zia, E. C. Guillermo
https://doi.org/10.15554/pcij.06011967.52.59
Click here to access the full journal article
Abstract
Columns in a framed structure are often required to resist bending moments as well as axial forces. The bending moment may be induced by wind and earthquake forces, eccentric loads, or frame action. In precast concrete construction, bending in columns also occurs during handling. In such cases, prestressing may be of considerable value in providing greater strength and stiffness to the column.
References
1. Breckenridge, R. A., "A Study of the Characteristics of Prestressed Concrete Columns", Report 18-6, University of Southern California Engineering Center, Los Angeles, April 1953.
2. Jernigan, A. M. and Ozell, A. M., "Some Studies on the Behavior of Prestressed Concrete Columns", Technical Progress Report No. 3, Florida Engineering Experiment Station, University of Florida, July 1956.
3. Zia, P., "Ultimate Strength of Slender Prestressed Concrete Columns", Technical Paper Series No. 131, Florida Engineering Experiment Station, University of Florida, 1957.
4. Lin, T. Y. and Itaya, R., "A Prestressed Concrete Column Under Eccentric Loading", PCI Journal, Vol. 2, No. 3, December 1957, pp. 5-17.
5. Lee, Y. C., "Behavior of Partially Prestressed Columns Under Eccentric Loads", Graduate Student Report No. 35, SESM Division, University of California, Berkeley,1962.
6. Hromadik, J. J., "Column Strength of Long Piles," ACI Journal, June 1962, pp. 757-778.
7. Tai, Harold, "An Analytical Study of Partially Prestressed Concrete Columns Under Eccentric Loads", Graduate Student Report No. 129, SESM Division, University of California, Berkeley, 1963.
8. Sandrini, L. M., "Ultimate Strength of Partially Prestressed Concrete Columns Under Eccentric Load-A Computer Analysis", Graduate Student Report No. 146, SESM Division, University of California, Berkeley, 1967.
9. Kabaila, A. P. and Hall, A. S., "Analysis of Instability of Unrestrained Prestressed Concrete Columns with End Eccentricities," Symposium on Reinforced Concrete Columns, ACI Special Publication SP-13, 1965, pp. 179-192.
10. Brown, H. R. and Hall, A. S., "Tests on Slender Prestressed Concrete Columns,"Symposium on Reinforced Concrete Columns, ACI Special Publication SP-13, 1965, pp. 192-204.
11. Itaya, R., "Design and Uses of Prestressed Concrete Columns", PCI Journal, June 1965, pp. 69-76.
12. Guillermo, E. C., "Ultimate Strength of Prestressed Concrete Columns Subjected to Combined Bending and Axial Load", Graduate Student Report No. 185, SESM Division, University of California, erkeley, 1965.
13. Lin, T. Y. and Lakhwara, T. R., "Ultimate Strength of Eccentrically Loaded Partially Prestressed Columns", PCI Journal, June 1966, pp. 37-49.
14. Zia, P. and Moreadith, F. L., "Ultimate Load Capacity of Prestressed Concrete Columns", ACI Journal, July 1966, pp. 767-788.
15. Aroni, S., "Slender Prestressed Concrete Columns", PhD Dissertation, University of California, Berkeley, 1966.
16. Laszlo, G., "Experimental Research on the Buckling Behavior of Slender Prestressed Concrete Columns", MSE Thesis, University of British Columbia, 1966.