A Novel QTL in Durum Wheat for Resistance to the Wheat Stem Sawfly Associated with Early Expression of Stem Solidness

The wheat stem sawfly (WSS) (Cephus cinctus Norton) is a major yield-reducing pest of wheat (Triticum aestivum L.). Varieties with pith-filled, or solid, stems provide a measure of resistance by inhibiting larval survival inside the stem. Durum wheat (Triticum turgidum L.) has resistance to the wheat stem sawfly even in the absence of known genes for stem solidness. To determine the genetic basis of resistance in durum wheat, a susceptible durum wheat, PI 41353, was identified from among 1,211 landrace accessions from around the world screened in WSS-infested sites. A recombinant inbred line (RIL) population of 105 individuals was developed from a cross of PI 41353 with a typically resistant variety, Pierce. The RIL were screened in a total of three WSS-infested locations in Montana over a two year period. A genetic map was constructed with 2,867 SNP-based markers. A quantitative trait locus (QTL) analysis identified six QTL associated with resistance. An allele from resistant cultivar Pierce at a QTL on chromosome 3A, Qss.msub-3AL, caused a 25% reduction in stem cutting. Assessment of near-isogenic lines that varied for alleles at Qss.msub-3AL showed that the Pierce allele was also associated with higher stem solidness as measured early in stem development, which is a critical stage for WSS oviposition and larval development. Stem solidness of Pierce and other resistant durum wheat lines largely disappeared later in plant development. Results suggest a genetic mechanism for WSS resistance observed in durum wheat, and provide an additional source of WSS resistance for hexaploid bread wheat.

occurred during the 10,000 year history of hexaploid wheat (Dvorak et al., 1998;Talbert et al. 1998). Additionally, important genes have been introgressed into hexaploid wheat from tetraploid relatives by wheat breeders. For example, the durum wheat cultivar 'Iumillo' was used to transfer the stem rust (Puccinia graminis f. sp. tritici) resistance gene Sr9g/Yr7 into the widely grown hexaploid cultivar 'Thatcher' (Sharma and Gill 1983). An allele for high grain protein concentration was introgressed into hexaploid wheat from tetraploid T. turgidum, and has subsequently been incorporated into currently grown varieties (Mesfin et al., 1999;Blake et al., 2014).
Limits to allelic diversity within cultivated hexaploid wheat present challenges for developing cultivars with resistance to insect pests. The wheat stem sawfly (WSS) is a native species that has been an important economic pest of wheat in the Northern Great Plains of North America for more than a century (Beres et al., 2011;Lesieur et al. 2016). Another closely related WSS species (C. pygmaeus L.) is a historical wheat pest in central Europe (Damania et al., 1997;Korkmaz et al., 2010). Wheat stem sawfly resistant varieties with pith-filled solid stems have been deployed in North America to help control WSS since the 1950s. Most currently grown WSS resistant varieties have a solid-stem trait that can be traced to the landrace accession 'S-615' originating from Portugal. A progeny line selected from a cross with S-615, named 'Rescue', was the first solid-stem WSS-resistant cultivar released in North America (Platt et al., 1948). A quantitative trait locus (QTL) on chromosome 3B, Qss.msub-3BL, has been shown to control most of the variation for stem solidness in crosses between solid and hollow-stem genotypes (Cook et al., 2004). The allele conferring solid stems, Qss.msub-3BL.b, originated from Rescue. Based on single nucleotide polymorphisms (SNPs) Cook et al. (2017) found the Rescue derived solid-stem haplotype at the Qss.msub-3BL locus was common in current WSS-resistant wheat cultivars.
More recent genetic studies have identified a second allele at the Qss.msub-3BL locus contributing to stem solidness. This allele was first identified in the cultivar Conan and was designated Qss.msub-3BL.c (Sherman et al., 2010;Varella et al., 2017). The Qss.msub-3BL.c allele confers a solid-stem phenotype that is different from the phenotype conferred by the Rescue-derived Qss.msub-3BL.b allele. Varella et al. (2016) developed near-isogenic lines (NILs) that differ for the alleles at the Qss.msub-3BL locus. Temporal progression of stem solidness during plant development showed a markedly different pattern of solidstem expression. Both the Rescue-derived and Conan-derived alleles at Qss.msub-3BL locus expressed solid stems early in plant development. The early period of stem elongation coincides with WSS oviposition and development of young larvae in the stem. However, most of the stem solidness was lost later in stem elongation and maturation in NILs with the Conan-derived allele, while stems remained solid throughout stem maturation for NILs with the Rescue-derived allele. Talbert et al. (2014) showed that the Conan-derived allele provides a higher level of WSS resistance, leading to reduced oviposition by female WSS, and thus lower stem cutting due to infestation.
The solid-stem trait has been identified in several durum wheat landrace accessions from Turkey, where multiple species of WSS are historic yield-impacting pests (Damania et al., 1997). A QTL for solidstems has been identified in durum wheat that is orthologous to the Qss.msub-3BL QTL in hexaploid wheat (Houshmand et al., 2007). Most durum wheat accessions do not possess the solid-stem Qss.msub-3BL.b allele for stem solidness, and have been traditionally classified as hollow-stemmed. However, hollow-stem durum wheat typically has more resistance to WSS than hollow-stem hexaploid wheat (Goosey et al., 2007). Durum wheat appears to possess an allele or alleles for WSS resistance that is not related to the widely used solid-stem trait. Temporal measurements of stem solidness throughout plant development have not been reported for durum wheat.
Genetic dissection of the innate durum wheat resistance to WSS is impeded by the lack of a susceptible line to use as a parent in population development. For this project, we screened a large set of durum wheat landrace accessions to identify a susceptible landrace. The susceptible landrace was crossed to a typically resistant durum wheat cultivar which lacked the solid stem trait conferred by Qss.msub-3BL locus. A recombinant inbred line (RIL) population was screened under WSS pressure to identify QTL for resistance. The population was also assessed for temporal progression of stem solidness during plant development. Near-isogenic lines for a QTL conferring resistance were developed to validate its impact on stem solidness in fixed genetic backgrounds. The results have implications for the development of superior WSS-resistant cultivars in both durum and common wheat, and may provide insights into the history of domestication in hexaploid wheat.

MATERIALS AND METHODS
Durum wheat landrace screening Seeds from 1,221 spring durum wheat landrace accessions were obtained from the USDA-ARS National Small Grains Collection (NSGC). Accessions originated from Africa (n = 126), Asia (n = 604), Europe (n = 488), Oceania (n = 1), and South America (n = 2). Mass screening of landraces was conducted over a period of two years, with each landrace accession being evaluated in a single year. Accessions were planted in late April, at sites naturally infested with WSS located near Loma, MT (48°04' 21.96" N, 110°27' 41.84" W) in 2013, and Amsterdam, MT (45°45'29.85$N, 111°22'49.32$W) and Loma in 2014. Plots consisted of 10 seeds per entry in unreplicated hills with spacing of 0.6 m between adjacent hills. Check varieties were replicated every 50 hill plots and included a WSS susceptible variety, 'McNeal' (PI 574642) or 'Hank' (PI 613585), and a solid-stemmed WSS resistant variety, 'Choteau' (PI 633974) or 'Fortuna' (CItr 13596). Plants were evaluated at maturity for stem solidness using a scoring scale ranging from 1 (completely hollow) to 5 (completely solid), as described by Varella et al. (2016). Stems collected from the field were dissected in the laboratory to determine levels of WSS infestation, larval mortality, and parasitism as per Talbert et al. (2014). Late heading (Julian heading date .191d) accessions were not collected due to the likelihood that stem elongation occurred after WSS female oviposition. Stem cutting data from the first year of experiments was used to select thirteen durum wheat landrace accessions for further evaluation in replicated trials. Selected accessions were from Ethiopia (n = 1), India (n = 1), Georgia (n = 1), Turkey (n = 8), Peru (n = 1), and Moldova (n = 1). Replicated trials were conducted in Loma and Amsterdam, MT, USA in 2014 and again in Amsterdam in 2015. Hill plots were planted in a randomized complete block design with two replications. Check varieties included the spring wheat line Fortuna and the spring durum wheat 'Pierce' (PI 632366). Plots were visually assessed at maturity for percent stem cutting and then stems were collected and dissected for further characterization of WSS parameters as described above.
Results from replicated trials were analyzed using PROC GLM in SAS 9.3 (SAS Institute Inc. 2012) using a model for a randomized block design combined over environments. Entries and locations were considered fixed effects. The LSMEANS statement was used to adjust for unbalanced data from missing plots caused by no germination or insufficient number of stems in the 2015 field trial.

Recombinant Inbred Line Population
The durum wheat landrace PI 41353 was found to have a high level of infestation and stem cutting. A total of 105 RILs were developed from the cross Pierce/PI 41353. Pierce showed typical durum wheat resistance to the WSS. The RIL were derived by single seed descent from F 2 to F 5 generations, at which point a single plant was used as seed source for each line. Seed was advanced in bulk for each line in subsequent generations. The populations were planted in three WSS-infested sites, including Amsterdam, MT (45°45'30" N, 111°22'49" W) in 2016 andBig Sandy, MT (48°15' 46" N, 110°22' 11" W) in 2017. Hill plots were established as ten seeds per plot spaced 0.6 m apart. Trials were planted as randomized complete block designs with three replications. Check varieties included solid-stemmed hexaploid wheat Choteau and hollow-stemmed hexaploid wheat 'Reeder' (PI 613586), along with parents PI 41353 and Pierce.
A visual estimate of percent stem cutting was recorded for each hill plot at the end of the season. Additionally, every stem in each plot was collected for dissection to determine the presence and eventual fate of WSS larvae. Stem dissection revealed varying levels of parasitism by endemic natural enemies (Runyon et al. 2002;Sherman et al. 2010), which was recorded for each plot. Key parameters derived from stem dissection included the percentage of stems containing larvae or eggs (infestation), the percentage of dead larvae minus the percentage of those killed by parasitoids (mortality), and the percentage of stubs, or cut stems. Plant heading date were obtained for the two Amsterdam environments. Data for each response variable for this multi-location trial was analyzed via analysis of variance using a model for a randomized block design combined over locations with PROC GLM in SAS 9.3 (SAS Institute Inc. 2012). Environments and entries were considered fixed effects. The LSMEANs statement was used to calculate entry means due to the occurrence of missing plots. For one location (Amsterdam 2016), entries were also scored for the number of internodes with boring injury for all infested stems. This data were analyzed by PROC GLM with entries as fixed effects.
The RILs were also planted as unreplicated 3-m rows at a non-WSS infested site in Bozeman MT (45°40' 33.6'' N, 111°9' 25.2'' W) over a two-year period. This trial allowed assessment of both early and late stem solidness and plant height as described by Varella et al. (2016). Early stem solidness was assessed by collecting the main stems of three plants of each plot approximately 35 days after planting when plants were at Zadoks 37 (at least two measurable internodes) (Zadoks et al. 1974). Internodes were scored on a 1 to 5 scale, with 1 being hollow and 5 being solid. Final stem solidness of each main stem was calculated by total solidness score divided by total number of internodes. Late stem solidness was assessed by collecting the main stems of three plants of each plot at maturity (near Zadoks 77) in late August. Stems were dissected and each internode was rated for stem solidness as described above. Analysis of variance was conducted using each year as a replicate to test for significance of entry effects on stem solidness. Entries were considered fixed effects. Correlation analysis between stem solidness and the mean for WSS resistance traits measured in three WSS-infested locations was performed with PROC CORR in SAS 9.3 (SAS Institute Inc. 2012).

90K iSelect genotyping
The RIL population was genotyped using the Illumina 90K iSelect assay (Wang et al., 2014). Data analysis was conducted using Illumina's GenomeStudio 2011 v1 software (Illumina, Inc., San Diego CA, USA). Allele call for each SNP was done manually. Markers with more than 10% missing genotypes, monomorphic or showing significant distortion at the 0.05 level after Bonferrroni correction were discarded.
Sequence-based SNP genotyping Genomic DNA from RIL populations derived from Pierce/PI 41353 were quantified using PicoGreen (LifeTechnologies) and normalized to 50 ng uL-1 of DNA per line. Libraries for sequencing (95-plex) were prepared according to Saintenac et al. (2013) using the PstI/MseI combination of enzymes. Sequencing was performed on an Illumina HiSeq2500 platform with 100-bp paired-end sequence reads. The analysis pipeline was conducted using TASSEL software version 4.0 (Glaubitz et al. 2014). Briefly, tag counts were generated and merged using default parameters with the FastqToTagCountPlugin and MergeMultipleTagCountPlugin, respectively. Bowtie 2 version 2.2.9 (http://bowtie-bio.sourceforge.net/bowtie2/index.shtml) was used to align tags to the wheat pseudo-reference genome (accessible at: ftp://ftp.ensemblgenomes.org/pub/plants/release-31/fasta/ triticum_aestivum/dna/) (IWGSC, 2014). The output of the alignment was converted to a "Tags On Physical Map" (TOPM) file by the SAMConverterPlugin. The SeqToTBTHDF5Plugin and ModifyTBTHDF5Plugin were used to generate a "Tags by Taxa" (TBT) file containing sorted and demultiplexed reads. SNPs were called using the DiscoverySNPCallerPlugin with the following non-

Genetic linkage map construction and QTL analysis
Linkage map construction for the Pierce/PI 41353 RIL population was conducted using R/qtl (Broman et al., 2003) and R/ASMap (Taylor and Butler 2014) packages in R (Broman and Sen 2009). Polymorphic markers with more than 25% missing data or significant Mendelian segregation distortion (x2 test, P , 1.0e -7 , d.f. = 1) were excluded. Co-segregating markers were also discarded. The mstmap function (Wu et al. 2008) from R/ASMap package was used to group and order markers. Map distances (cM) were calculated using the Kosambi function with a significance threshold of p.value = 1e -7 for linkage group formation. A heat map of estimated recombinant fractions and LOD scores was used for checking marker order on each linkage group. Standard interval mapping (Broman et al., 2003) was conducted using the scanone function and the Haley-Knott regression method. Significance thresholds (P , 0.05) for LOD scores were determined using permutations with 1,000 replications. Phenotypic and genotypic data used for the QTL analysis is in Supplementary Table S1.
Development of Near-Isogenic Lines for a 3A QTL and stem solidness progression experiment The heterogeneous inbred family method (Haley et al., 1994;Pumphrey et al., 2007) was used to develop NIL for a QTL identified on chromosome 3A for early solidness and WSS cutting. Three Wheat iSelect 90K chip (Wang et al. 2014) SNP markers associated with the 3A QTL were converted to kompetitive allele specific PCR (KASP) markers (LGC Biosearch Technologies, Middlesex, UK) . KASP marker sequences were obtained from the Wheat iSelect 90K designed markers available from PolyMarker (http://polymarker.tgac.ac.uk), The Genome Analysis Center of John Innes Center). The KASP genotyping system was used for KASP assays, following the LGC protocol (https:// www.biosearchtech.com). Reactions were performed on the Bio-Rad CFX96 touch real-time PCR detection system (Bio-Rad, Hercules, CA), and allelic calls were made using the Bio-Rad CFX manager software version 3.1 (Bio-Rad, Hercules, CA). The KASP markers were used to screen F 5 plants from each RIL of Pierce/ PI 41353 population. Four F 5 plants heterozygous for the 3A QTL were identified. The four heterozygous individuals were allowed to self-pollinate to generate F 6 progeny. The KASP markers were used to identify homozygous F 6 individuals. These homozygous F 5 -derived F 6 plants were the source of paired NIL containing either the Pierce or PI 41353 allele at the chromosome 3A QTL. Each NIL pair is designated as a family. Family CPSD9-6 included three lines with the PI 41353 allele and three lines with the Pierce allele. Families CPSD9-22, CPSD9-88 and CPSD9-101 each had one line of each allele type. A total of six NIL pairs was used in a time-course experiment on the progression of stem solidness in a greenhouse study in the Plant Growth Center at Montana State University (MSU-PGC, Bozeman, MT). The trial also included parents PI 41353 and Pierce, as well as hexaploid wheat checks Conan, Choteau and Reeder. Three additional durum wheat lines included resistant landraces PI 91956 and PI 178678, and resistant durum wheat variety Mountrail (PI 607540). The NIL and check varieties were planted at four different dates in the fall of 2018, with three pots of each genotype per planting date The average value of three plants per pot was used for analysis. The experiment was designed as randomized complete block, with each planting date serving as a replication. Plants were grown under a 16-hour day photoperiod with the day/night temperature of 22°/ 20°, watered regularly and fertilized twice a week beginning at the 3 leaf stage with 100ppm Peter's Professional 20-20-20 Fertilizer.
The progression of stem solidness was assessed by dissecting internodes of the main stem at three growth stages, including Zadoks stage 37 (flag leaf just visible; about 42 days after planting), Zadoks stage 49 (first awns visible; approximately 48 days after planting) and Zadoks stage 77 (late milk; approximately 65 days after planting). One of the three pots of each genotype per replication was used for stem dissection for each of the three stages. Stem solidness was scored using a scale ranging from 1 (completely hollow) to 5 (completely solid), as described by Varella et al. (2016). Final stem solidness of each main stem was calculated by total solidness score divided by total number of internodes. PROC GLM in SAS 9.3 (SAS Institute Inc. 2012) was used to conduct an analysis of variance to determine allele effects within each NIL family and combined over families, where allele type was considered a fixed effect. To assess whether stem solidness scores declined over time, the Slice command in PROC GLM (SAS Institute Inc. 2012) was used to determine differences between solid stem scores at Zadoks 37 and Zadoks 77 for each entry. Entries and Zadoks stage were considered fixed effects.

Data Availability
Supplementary material is available at GSA figshare portal. Table S1 contains phenotypic and genotypic data used for the QTL analysis. Table  S2 contains sequences for three KASP markers used to develop NIL for a WSS-resistance QTL. Figure S1 is a graphic genetic map with QTL locations. Supplemental material available at FigShare: https://doi.org/ 10.25387/g3.7934615.

RESULTS
Of the 1,221 durum wheat landraces planted in 2013 and 2014, 571 accessions were collected and dissected over the course of two years and three trials from WSS-infested sites in Montana. Approximately 10% of the plots were missing among the three trials. Additionally, late heading plots were not collected and in 2013 only uncut plots were collected. Very little cutting was observed in most of the durum wheat landraces. Stem infestation in the durum wheat was consistently low, with mean values of 2.8% in 2013, 5.5% in 2014, and 12.8% in 2015 (data not shown). Nevertheless, infestation ranged from 0 to 44%, and stem cutting ranged from 0 to 29.7%, with a mean value of 0.73%.
Based on the initial screening nurseries, thirteen durum wheat accessions that varied for stem cutting in the screening trials were entered into replicated trials grown over three environments (Table 1). Most accessions had less than 10% infested stems ( Table 1). The level of cutting in most of the durum wheat landrace accessions was not different from that observed for the hexaploid wheat check cultivar Fortuna. Fortuna is a historically important solid-stemmed cultivar grown due to its resistance to the WSS (Lebsock et al., 1967). Fortuna is also a standard height cultivar similar to the landrace durum wheat accessions. A single accession from India, PI 41353, had a significantly (P , 0.05) higher level of infestation (31.7%) than the other durum wheat landraces and the resistant common wheat Fortuna (Table 1). Pierce had low stem cutting due to the WSS similar to other durum wheat lines, though initial infestation was higher (Table 1). Pierce had only 1% cutting vs. 13% for PI 41353.
A total of 105 RILs were developed by single seed descent from a cross between resistant Pierce and susceptible PI 41353. Assessment of stem solidness over two years in a non-WSS infested site showed that the RILs differed significantly for stem solidness measured early in plant development (Zadoks 37) with mean solidness score of 3.5, where 1 is completely hollow and 5 is completely solid ( Table 2). The parental line Pierce had a solid stem score of 3.7 vs. 3.1 for PI 41353 (P = 0.07) in these trials. Solid-stem measurements at plant maturity (Zadoks 77) also varied significantly among the progeny, though the amount of variation was lower than that for the solid stem measurements early in plant development. Pierce had a solid stem score at maturity of 2.6 vs. 2.5 for PI 41353 (P . 0.05). The RILs also varied significantly for all WSS resistance traits, including percent infestation, percent mortality, and field and laboratory measurements of stem cutting.
A correlation analysis of stem solidness data and WSS resistance was conducted based on the means over sites (Table 3). Solid-stem scores early in plant development showed a significant negative correlation with percent WSS infestation and both measures of stem cutting. Early measurement of stem solidness (Zadoks 37) was positively correlated with percent mortality (P , 0.05). However, solid-stem scores at plant maturity (Zadoks 77) were not significantly correlated with any measurements of WSS resistance (Table 3).
A genetic map was constructed for the population of 105 Pierce/PI 41353 RILs. The sequence-based SNP genotyping procedure yielded 4,375 polymorphic markers, from which 974 were mapped along with 1,893 SNP markers derived from the Illumina 90K iSelect array. Average spacing was 1.8 cM with a marker density of 1.7 cM/marker. Linkage groups varied in number of markers and marker density, with linkage group 4B showing the smallest number of markers (n = 93). The genetic map is shown in Supplementary Table S1.
A QTL analysis was conducted based on data combined over locations. The solid stem data were collected from two non-WSS infested locations, while the WSS resistance data were collected from three WSS infested nurseries. Alleles for WSS resistance were contributed by both parents. Least square means over three WSS infested locations (Table 4) showed a significant QTL on chromosome 3A, designated Qss.msub-3AL, with Pierce contributing the Qss.msub-3AL.b allele for low stem cutting based on field measurement. Landrace PI 41353 contributed the Qss.msub-3AL.a allele for greater stem cutting. The number of internodes bored by the WSS for each infested stem, assessed only in the Amsterdam trial in 2016, showed a difference (P , 0.05) between RIL with alternative alleles at Qss.msub-3AL. The RIL with the Pierce allele had an average of 2.0 internodes bored per infested stem, while the number of bored internodes was 2.3 for RIL with the PI 41353 allele (data not shown).
A QTL was also detected at Qss.msub-3AL for solid-stems measured early in plant development based on data averaged across two non-WSS infested sites (Table 4). The Pierce Qss.msub-3AL.b allele was associated with increased stem solidness. The Pierce allele on chromosome 3A was also associated with decreased plant height (data not shown). An allele for lower WSS cutting (lab assessment) on chromosome 2B was contributed by Pierce. This allele was associated with a significant delay in heading (data not shown). Pierce also contributed an allele for low WSS infestation for a QTL on chromosome 1A. The susceptible parent PI 41353 contributed alleles for low WSS infestation (chromosome 7B) and WSS high mortality (chromosome 3B) (Table 4). A graphic genetic map with QTL locations is shown in Supplementary Figure S1.
The association of the Pierce Qss.msub-3AL.b allele with reduced WSS stem cutting and increased stem solidness early in plant development prompted the development of NIL that varied for alleles at the 3A QTL. Four heterozygous individuals were identified in the F 5 generation of the Pierce/ PI 41353 RIL population. These were used to derive the homozygous classes of NIL based on the 'heterogeneous inbred population' method (Haley et al., 1994;Pumphrey et al., 2007) using KASP markers shown in Supplemental Table S2. Paired NILs were tested for temporal solid-stem variation across plant developmental stages in the greenhouse ( Table 5). The Pierce Qss.msub-3AL.b allele was associated with higher solid stem scores early in plant development (Zadoks 37) across all four NIL comparisons, with a mean solid stem score of 2.9 vs. 1.9 for the PI 41353 allele. Increased stem solidness was also associated with the Pierce Qss.msub-3AL.b allele as the stem matured (Zadoks 49 and Zadok 77), though the difference between the Pierce allele and the PI 41353 allele decreased. Measurements taken at Zadoks 77 (soft dough stage) showed that the Pierce allele resulted in a solid-stem score of 1.9 vs. 1.5 for the PI 41353 allele.
Temporal measurements of stem solidness were also assessed in other tetraploid and hexaploid lines ( Table 6). The hexaploid wheat Choteau carries the Rescue-derived solid-stem Qss.msub-3BL.b allele while hexaploid Conan has the alternative solid-stem Qss.msub-3BL.c allele. Both showed significantly greater stem solidness at all stages in comparison to the hexaploid hollow stem variety Reeder which has the n a Mortality is calculated as total larval mortality in the stem minus the number of larvae killed by parasitoids divided by the total number of infested stems.
b Stem cutting was determined by counting stubs at the time of stem dissection.
n a Scale of 1-5, where 1 is hollow and 5 is completely solid. b Visual assessment of percent cut stems in the field. c Mortality is calculated as total larval mortality in the stem minus the number of large larvae killed by parasitoids divided by the total number of infested stems.

DISCUSSION
Crossing barriers due to ploidy differences have limited the amount of genetic diversity in hexaploid wheat relative to its ancestors. Diversity present in progenitors can be accessed through directed crossing programs, either through development of synthetic hexaploids from tetraploid wheat and diploid Ae. tauschii, or through direct crossing of tetraploid wheat with hexaploid wheat. Lanning et al. (2008) showed that most crosses between durum wheat and hexaploid wheat produce low numbers of viable progeny, though some crosses have a higher success rate. Kalous et al. (2015) used this information to develop both tetraploid and hexaploid RIL populations from tetraploid by hexaploid crosses. In their study, favorable alleles for yield related traits could be identified from the durum wheat parent in a hexaploid background. However, the overall performance of the hexaploid RIL was inferior to both the durum or hexaploid wheat parent. Thus, introgression of specific alleles using marker-assisted selection from durum wheat into hexaploid wheat may be necessary for successful utilization of durum wheat germplasm to improve hexaploid wheat.
An example of a potentially useful trait from durum wheat is resistance to WSS. Resistance to WSS in hexaploid wheat has historically depended upon alleles for solid stems at the Qss.msub-3BL locus originally introduced into the cultivar Rescue from a Portuguese landrace, S-615 (Platt et al., 1948). An orthologous locus controlling solid stems in durum wheat has been designated Sst1 (Houshmand et al., 2007). However, even in the absence of stem solidness due to Sst1, durum wheat has resistance to WSS relative to hollow stem hexaploid wheat (Goosey et al., 2007). The genetic basis for this resistance has not been determined. An impediment to identifying the genetic source of WSS resistance in durum has been the lack of a susceptible durum wheat to use as a parent in crosses to resistant durum wheat. The screening of a large number of durum wheat landraces for this research allowed identification of a susceptible landrace, PI 41353.
The RIL population developed from a cross between WSS resistant Pierce and WSS susceptible PI 41353 allowed identification of an allele from Pierce at Qss.msub-3AL that had high stem solidness early in plant development and was associated with reduced stem cutting by WSS. The degree of solid stems early in plant development was positively correlated to all measures of WSS resistance, causing decreased infestation, increased larval mortality, and decreased stem cutting. Varella et al. (2017) showed high levels of stem solidness early in plant development attributable to the Qss.msub-3BL.c Conan-derived allele also resulted in lower infestation. There was no correlation between stemsolidness measured at plant maturity and WSS resistance in the present study. Development of NILs using KASP markers linked to Qss.msub-3AL allowed verification of the solid-stem phenotype caused by the allele from Pierce. The Pierce Qss.msub-3AL.b allele was associated with n Table 3 Correlation coefficients and level of significance between stem solidness and WSS resistance traits in a set of 105 recombinant inbred lines from a Pierce/PI 41353 cross. The P value is given parenthetically a QTL numbers as depicted on graphical genetic map (Supplemental Figure 1) b Visual assessment of percent cut stems in the field. c Laboratory assessment on collected plots at the time of dissection. d Confidence intervals were calculated by the Bayes credible interval method (Broman and Sen 2009). e The Pierce allele was associated with reduced height of 6.2 cm. f The Pierce allele was associated with delayed heading of 2.5 days. g This QTL is designated Qss.msub-3AL.
solid stems early in plant development in the NIL, but the solid-stem level declined as the plant progresses to maturity. The early expression of stem solidness appears to be critical for conferring resistance to the WSS. The durum wheat solid stem Qss.msub-3AL.b allele may be useful to enhance resistance in hexaploid wheat. The first step in this process is to move the durum wheat allele into a hexaploid wheat background. This step has likely already been accomplished through previous durum by hexaploid crossing programs. Table 6 indicates that the five durum wheat lines assessed in this study have solid stems early in plant development but this declines as the plant matures. Kalous et al. (2015) developed 177 hexaploid wheat lines from hexaploid by durum wheat crosses. A total of 66 of these lines contained the allele from durum at Qss.msub-3AL.b. Development of RIL populations using hexaploid lines with the durum wheat allele at Qss.msub-3AL.b will allow determination of the durum wheat solid stem phenotype and its effect on WSS resistance in a hexaploid wheat background.
The stem solidness and WSS resistance phenotype expressed by the durum wheat Qss.msub-3AL QTL is similar to the hexaploid wheat Conan-derived Qss.msub-3BL.c allele (Table 6; Varella et al., 2016). The Conan-derived Qss.msub-3BL.c allele results in high stem solidness early in plant development and a high level of resistance to WSS (Talbert et al., 2014). The solid stem phenotype observed early in plant development has not been used as a target for breeding for resistance to the WSS. This is largely because screening for solid-stems has typically occurred near plant maturity (Wallace et al., 1969), and the phenotype of solid-stems early in plant development that then decreases as the plant matures would be missed. Screening for solid stems late in plant development is efficient providing the solid stem is due to the Rescue derived Qss.msub-3BL.b allele. This allele provides stable stem solidness throughout the life of the plant. However, the durum wheat Qss.msub-3AL.b allele and the Conan-derived Qss.msub-3BL.c allele do not provide an easily detectable increase in stem solidness late in plant development. Thus, a revised strategy for detecting the phenotype or the presence of the favorable allele is needed.
One method for detecting early stem solidness among a large number of breeding lines is to assay plants by a longitudinal sectioning of the elongating main stem. This is problematic in large scale applied breeding for several reasons. First, the tissue is fragile and requires more care than may be possible in nurseries containing thousands of segregating progeny rows. Second, sampling is destructive to the plant. Finally, stem elongation does not occur at the same time for all progeny, leading to the need to revisit nurseries several times. Conducting stem dissection by cross-sectioning at maturity with scissors avoids all of these problems, but does not allow detection of early stem solidness. It is likely that it is most efficient to use DNA-based markers to detect alleles for early stem solidness. Molecular markers linked to stem solidness can be used in breeding programs to facilitate marker assisted selection and gene pyramiding, which allows screening of large population even in the seedling stage with just a piece of leaf tissue. Among different kinds of molecular markers, KASP, owing its low cost, high throughput, and specificity, has been extensively used in SNP genotyping. Our study revealed three KASP markers that can be used to detect Qss.msub-3AL in the development of varieties resistant to WSS.
In conclusion, a cross was made between a typically WSS-resistant durum wheat Pierce and a rare susceptible durum wheat landrace PI 41353. Analysis of RIL revealed several QTL for WSS resistance, including Qss.msub-3AL.b which was also associated with early stem solidness. Early stem solidness was significantly correlated with low WSS infestation, high WSS mortality and low levels of stem cutting. Development of NIL for Qss.msub-3AL.b showed the Pierce allele caused a high level of early stem solidness, which declined during stem development. These results provide an explanation for the inherent resistance to WSS observed in most durum wheat accessions. Additionally, the KASP markers developed for the durum wheat allele for early stem solidness will be useful for developing hexaploid wheat cultivars with resistance to the wheat stem sawfly.  n a Scale is 1 to 5, with 1 being hollow and 5 being completely solid.
b P value is from analysis of variance of means including both NIL and checks (n = 21).