Edinburgh Research Explorer Exploiting Native Forces to Capture Chromosome Conformation in Mammalian Cell Nuclei Exploiting Native Forces to Capture Chromosome Conformation in Mammalian Cell Nuclei

General rights Copyright for the publications made accessible via the Edinburgh Research Explorer is retained by the author(s) and / or other copyright owners and it is a condition of accessing these publications that users recognise and abide by the legal requirements associated with these rights. Take down policy The University of Edinburgh has made every reasonable effort to ensure that Edinburgh Research Explorer content complies with UK legislation. If you believe that the public display of this file breaches copyright please contact openaccess@ed.ac.uk providing details, and we will remove access to the work immediately and investigate your claim. Abstract Mammalian interphase chromosomes fold into a multitude of loops to fit the confines of cell nuclei, and looping is tightly linked to regulated function. Chromosome conformation capture (3C) technology has significantly advanced our understanding of this structure-to-function relationship. However, all 3C-based methods rely on chemical cross-linking to stabilize spatial interactions. This step remains a " black box " as regards the biases it may introduce, and some discrepancies between microscopy and 3C studies have now been reported. To address these concerns, we developed " i3C " , a novel approach for capturing spatial interactions without a need for cross-linking. We apply i3C to intact nuclei of living cells and exploit native forces that stabilize chro-matin folding. Using different cell types and loci, computational modeling, and a methylation-based orthogonal validation method, " TALE-iD " , we show that native interactions resemble cross-linked ones, but display improved signal-to-noise ratios and are more focal on regulatory elements and CTCF sites, while strictly abiding to topologically associating domain restrictions.


Introduction
The higher-order folding of mammalian chromosomes has long been linked to the regulation of their function. However, over the last decade, studies exploited 3C technology to significantly advance our understanding of this structure-to-function relationship Pombo & Dillon, 2015;Denker & de Laat, 2016) and allowed us to address diverse biological questions (e.g., Tolhuis et al, 2002;Papantonis et al, 2012;Zhang et al, 2012;Naumova et al, 2013;Rao et al, 2014). We now know that interphase chromosomes are partitioned into topologically associating domains (TADs; Dixon et al, 2012) ranging from 0.1 to few Mbp. TADs are rich in intradomain (versus interdomain) multi-loop interactions connecting genes and cis-regulatory elements, and their boundaries remain largely invariant between different cell types (Dixon et al, 2012;Rao et al, 2014) or upon cytokine signaling (Jin et al, 2013;Le Dily et al, 2014).
3C methods rely on chemical cross-linking for stabilizing and capturing spatial interactions. Although formaldehyde is widely used in molecular biology, and its chemistry is well understood, its in vivo effects remain obscure (Gavrilov et al, 2015). For instance, not all nuclear proteins/loci are equally efficiently cross-linked (Teytelman et al, 2013); cross-linking may trigger the DNA damage response to induce polyADP-ribosylation of the proteome and thus alter its susceptibility to fixation (Beneke et al, 2012), while fixation is sensitive to even slight changes in temperature, pH, and duration (Schmiedeberg et al, 2009). Then, it is conceivable that variations in fixation efficiency within the different nuclear microenvironments (e.g., in hetero-versus euchromatin) can skew experimental readouts. Discrepancies between DNA FISH and 5C studies in the HoxD locus were recently reported (Williamson et al, 2014). FISH requires harsher fixation than the 5C procedure and, in multiple cases, microscopy and 3C results do correlate well; nonetheless, such discrepancies may, at least in part, stem from differential fixation effects in the dense chromatin mesh within TADs. Moreover, any interactions that end up being detected via 3C assays must survive harsh detergent treatment, prolonged heating and shaking, plus unphysiological salt concentrations (Stadhouders et al, 2013). To address these concerns, we developed "intrinsic 3C" (i3C), a novel approach to capture chromatin conformation in living cells without a need for cross-linking. i3C exploits native forces that preserve the relative spatial positioning of chromatin fragments. We generated i3C profiles in a number of cell types and loci to investigate different features of chromatin looping in the absence of chemical fixation.

Results and Discussion
We apply i3C (overview in Fig 1A) to intact nuclei from living, uncross-linked, cells harvested in a buffer (PB) that closely approximates physiological salt concentrations and deters aggregation of nuclear components (Kimura et al, 1999;Melnik et al, 2011). Thus, > 95% transcriptional activity is retained (Appendix Fig S1A), suggesting that chromatin organization is also maintained. Nuclei are treated with a restriction endonuclease for~30 min at a suboptimal temperature (not all enzymes work equally well in PB; Appendix Fig S1B), washed, and spun to remove any unattached chromatin. This removes > 40% of total chromatin ( Fig 1B) and so reduces the fraction of "bystander/baseline" ligations  to improve signal quality. Cohesive DNA ends are then ligated within intact nuclei, where native interactions are inherently preserved (Gavrilov et al, 2013;Rao et al, 2014), before the i3C template is purified (see Materials and Methods for details). The i3C workflow takes place in a single tube to minimize material losses, is faster than the conventional one (Stadhouders et al, 2013) and just as efficient (Appendix Fig S1C). In principle, i3C can also be applied to solid tissue (e.g., mouse liver) so long as single nuclei can be obtained.
To ensure that ligation occurs exclusively within single nuclei under native conditions, we mixed an equal number of human endothelial (HUVEC) and mouse embryonic stem cell (mESC) nuclei, performed i3C, and sequenced the resulting ligation products; < 0.7% of the reads pairs mapped one end to the human and the other end to the mouse genome. Then, as a substantial amount of DNA is lost in i3C, we asked whether any biases arise during cutting (which does not trigger the DNA damage response; Appendix Fig S1D). We treated nuclei with NlaIII, isolated DNA at different stages along the procedure and sequenced it (steps 2-4, Fig 1A). Read profiles from "lost" (step 3) and "retained" fractions (step 4) overlap (~70% NlaIII fragments have reads in both fractions) are equally enriched in active and inactive loci (e.g., at enhancers, CTCF-CTCF loops, lamin-associated domains; Fig 1C and Appendix Fig S1E-I), and display very similar fragment size contents (Appendix Fig S1J). Moreover, cutting chromatin in the presence or absence of cross-linking does not yield very different profiles, nor does it display a preference for "open" chromatin (despite the short incubation times used; Appendix Fig S2). Thus, the different chromatin regions are equally represented in i3C ligations.
Next, we produced an i3C template in HUVECs to query using qPCR (i3C-qPCR) interactions seen by conventional 4C for the EDN1 housekeeping gene (Diermeier et al, 2014). We paired an "anchor" primer at the EDN1 TSS with tandem primers at eight ApoI fragments within its locus and faithfully recapitulated all major interactions (with no interactions in the "lost" chromatin fraction; Appendix Fig S3). Some interacting fragments were separated by as many as 500 kbp, encouraging us to apply i4C-seq to our model SAMD4A locus (Diermeier et al, 2014). i4C templates were produced in HUVECs by cutting with ApoI, recutting and circularizing, amplifying fragments contacted by the SAMD4A TSS by inverse PCR, and amplimer sequencing. In parallel, the same viewpoint and primers were used to generate conventional 4C profiles. The resulting data were processed via "fourSig" (Williams et al, 2014) to correct for mapping biases and identify significant interactions. Comparison of i4C and conventional 4C SAMD4A cis-interactions A Overview of the i3C protocol. Living cells are harvested in a close-tophysiological buffer (PB; step 1); intact nuclei isolated by mild NP-40 treatment (step 2); chromatin digested using ApoI or NlaIII, nuclei spun to release unattached chromatin (step 3); and leave cut chromatin bound to the nuclear substructure (step 4). Then, ligation takes places in situ, and DNA is isolated (step 5). B Percentage of total cell chromatin present at the different steps of the procedure (AE SD; n = 2). C Relative contribution of the different HUVEC ChromHMM features in each i3C fraction. D i4C-seq (blue shades) and conventional 4C (gray shades) were performed side by side in HUVECs, using ApoI and the SAMD4A TSS as a viewpoint (triangle); profiles from two replicates are overlaid. The browser view shows interactions in the~1 Mbp around SAMD4A. The zoom-in shows interactions in the SAMD4A TAD (gray rectangle). Strong (red) and intermediate (brown) interactions called by fourSig, RefSeq gene models, and ENCODE ChIP-seq data are shown below.
Molecular Systems Biology 12: 891 | 2016 ª 2016 The Authors revealed extensive similarities, especially within the viewpoint's TAD ( Fig 1D). Few contacts were seen only in the absence of crosslinking (which was also confirmed by a differential analysis via "FourCSeq"; Klein et al, 2015;Appendix Fig S4). Compared to highresolution Hi-C (Rao et al, 2014) and ChIA-PET contact maps (Papantonis et al, 2012) from HUVECs, i4C showed matching interaction profiles and aligned well within TAD boundaries, while also reproducibly detecting some longer-range contacts (Appendix Fig  S5A and B). However, i4C profiles were more enriched in interactions with cis-regulatory regions (e.g., enhancers, CTCF sites; Appendix Fig S5C-E), and interactions unique to i4C (~65% of all cis-contacted fragments in i4C and conventional 4C overlap) are with genomic regions carrying the expected histone marks (e.g., H3K4me1/2, H3K36me3, H3K9ac; Appendix Fig S5F). Importantly, the signal at i4C contacts is more focal and allows deconvolution of single interactions ( Fig 1D and Appendix Fig S6A and B). Next, setting a "background" threshold at 100 rpm (as both positions and enrichments below this threshold showed the most variance in our replicates), we found 83% of i4C-seq reads over the threshold compared to < 60% of conventional 4C reads (Appendix Fig S7A). Moreover, i4C displayed significantly lower numbers of uncut and self-ligation reads for the SAMD4A viewpoint (a trend associated with milder fixation; van de Werken et al, 2012), as well as more reads mapping within its TAD (Appendix Fig  S7B). This held also true for i4C from the BMP4, CDKN3, and CNIH genes that reside in TADs of different sizes; all displayed > 40% reads mapping within their respective TAD (Fig 2 and Appendix Fig  S7C), suggesting TADs impose strong topological restrictions under native conditions. Similar SAMD4A i4C profiles were also obtained in a different cell type (IMR-90) or when ApoI was replaced by NlaIII (Appendix Fig S8). However, the SAMD4A locus is densely populated by genes and cis-elements. Hence, we also applied i4C to the gene-poor EDN1 and the hetero-chromatinized TBX5 loci. For the EDN1 TSS viewpoint, we essentially only record i4C contacts to other active promoters and cis-elements, again markedly more focal and enriched for relevant chromatin marks compared to conventional data (Appendix Fig S9), while TBX5 interacts with other H3K27me3-bound regions, including the neighboring, inactive, TBX3 locus (Appendix Fig S10). In addition, we could reproduce previously recorded interactions at and between the Nanog and Sox2 loci in mESCs (de Wit et al, 2013; Appendix Fig S11), confirming that i4C also captures trans-interactions. Finally, one tends to think that methods not using fixation require large numbers of primary material, but we typically use 5 million cells for i4C (below what is recommended for conventional 4C; Stadhouders et al, 2013). We also tested increasingly lower cell counts in i4C of the SAMD4A viewpoint; similar cis-profiles were obtained with < 10 6 cells, albeit at the expense of signal-to-noise ratios (Appendix Fig S12).
Recently, in situ Hi-C was performed in uncross-linked lymphoblasts (typically by embedding cells in agar); despite their relative sparsity, these profiles largely matched those obtained using crosslinking (Rao et al, 2014). To compare this and different experimental conditions to i3C, we generated interaction profiles for the SAMD4A TSS. Omitting formaldehyde fixation from the in situ protocol results in a markedly de-enriched interactome; for instance, the SAMD4A TSS is looped to a cluster of enhancers in its first intron-this interaction is significantly diminished when conventional 4C is performed without cross-linking, and essentially lost once cells are treated with RNase A (Appendix Fig S13A-C). Similarly, we previously used 3C-PCR to probe interactions between DNA fragments attached to isolated transcription factories (Melnik et al, 2011). We incorporated the factory isolation step (using Group-III caspases) in i3C and produced "factory 4C" data for SAMD4A; as expected, interactions are largely preserved, but such "factory 4C" can suffer from a bias for active gene interactions, as well as from the unknown effects of caspase digestion (Appendix Fig S13D). Then, native interactions seem best detected using i3C (which avoids SDS treatment, caspase digestion, or heating) and RNA, like that produced at the SAMD4A enhancer cluster, may stabilize particular interactions and reduce the release of cut fragments from the nuclear substructure (Appendix Fig S13E). Next, we used a predictive polymer modeling approach that can faithfully reproduce spatial chromatin organization based on ENCODE ChIP-seq and ChromHMM data (Brackley et al, 2016a) to simulate the interactome of the~2.8-Mbp locus shown in Fig 2. We generated 500 in silico conformations at 1-kbp resolution, from which average simulated interaction profiles were obtained and compared to experimental 4C/i4C data (see Appendix Supplementary Methods and Appendix Fig S14A and B). In agreement with all other comparisons, i4C and conventional 4C profiles closely resemble simulated ones (e.g., BMP4 i4C shows a correlation of 0.697 to the simulations, and 4C one of 0.745; Appendix Fig S14C).
We also devised "TALE-iD", a new orthogonal method for validating i4C interactions, as we sought to avoid FISH approaches, which require cross-linking (Williamson et al, 2014). We fused a custom TAL-effector DNA-binding domain (that specifically binds an enhancer in the first intron of ZFPM2; Mendenhall et al, 2013) with a bacterial adenosine methylase (Dam; Vogel et al, 2006). Once the targeted enhancer is found in physical proximity to other genomic regions (due to looping), the Dam methylase will methylate adenine residues thereon (Fig 3A). This construct was introduced into K562 cells, where the target enhancer is active and i4C finds it looped to the ZFPM2 TSS (Fig 3B). Genomic DNA from transfected K562 was then isolated and digested using DpnI (that cuts only methylated sites). Cutting efficiency at 12 different sites was quantified by qPCR and showed that the targeted enhancer contacts the TSS ("p1-p4") and an upstream enhancer ("m1"). However, another enhancer further downstream is not contacted, and no interactions are detected when a "DDam" construct is used (Fig 3B  and C).
We now understand that the promoters of stimulus-inducible genes are often prelooped to cognate enhancers (Jin et al, 2013). This motivated us to examine whether prelooping might arise as a result of cross-linking within tightly packed TADs. First, we applied i3C-qPCR to the IL1A TNF-responsive locus in HUVECs and verified prelooping under native conditions (Appendix Fig S15). We next generated i4C data for the TSSs of four genes in the same locus following a 60-min TNF pulse. Of these, the TNF-responsive BMP4 and SAMD4A are prelooped to H3K27ac-decorated enhancers (Fig 2  and Appendix Fig S16). We also reasoned that the focal i4C contacts can be used to track dynamic changes in interactions upon TNF stimulation. We compared i4C and 4C profiles before and after stimulation to find more changes in the absence of cross-linking (Appendix Figs S16 and S17). For SAMD4A, the loops between its TSS and the downstream enhancer cluster are partially remodeled A B C Figure 3. TALE-iD verifies native looping at the human ZFPM2 locus.
A An overview of TALE-iD. A construct encoding a TALE DNA-binding domain that targets an active enhancer in the ZFPM2 first intron is fused to a bacterial Dam methylase and introduced into K562 cells. Cells are harvested 48 h after transfection; genomic DNA is isolated and digested with DpnI to reveal sites specifically methylated by the Dam activity. Finally, qPCR using primers flanking different DpnI sites is used as readout. B i4C performed in K562 cells using ApoI and the ZFPM2 TSS as a viewpoint (triangle). i4C interaction in the 458-kbp ZFPM2 locus is shown, and the enhancer targeted by the TALE-iD construct is indicated (red triangle). K562 ENCODE ChIP-seq data are also shown below. C qPCR readout at different DpnI sites. DpnI sites at the ZFPM2 promoter (p1-p4) and enhancer (e1-e3; positions in panel B) were targeted in qPCRs after restriction digest. Bar plots show log 2 -fold enrichment of cut sites (1/DDC t ) over background DpnI cutting levels in untransfected K562 cells. Regions c1-c4 serve as controls; region m1 (an enhancer shown to interact with the TSS by i4C) is also methylated as part of a multi-loop structure. The same DpnI sites were also tested in transfections involving a construct encoding either a non-targeting ("scrambled") TALE domain or the targeting domain fused to an inactive Dam protein ("DDam"). *P < 0.05; two-tailed unpaired Student's t-test (n = 3). The bars and error bars denote mean AE SEM.  Fig S18A), which was further verified by differential analysis (especially at two sites in the SAMD4A enhancer cluster, where changes are dampened in conventional 4C; Appendix Figs S19 and S20). TNF stimulation does not change the fraction of reads mapping within the SAMD4A TAD (Appendix Fig S18B), many of which overlap NF-jB binding sites (Appendix Fig S18C). Then, prelooping and interaction remodeling to follow NF-jB binding (predominantly within their respective TADs) is seen for responsive TSSs, indicating these are prevalent and dynamic features of native folding. Finally, as i4C is a "one-to-all" approach, we sought to map interactions in a global fashion. We applied a capture-based 3C method, "T2C" , where probes targeting every ApoI fragment in our 2.8-Mbp model locus on chromosome 14 are used to retrieve and sequence a subset of 3C/i3C ligations. T2C was reproducibly performed in HUVECs to yield 1.5-kbp-resolution interaction maps (Fig 4A and Appendix Fig S21A-C). In the presence of cross-linking, all known features of genomic organization are seen; when performed natively, the outline of sub-TADs (or contact domains) is mapped at lower resolutions (Fig 4A, top), while at higher resolutions individual chromatin loops are resolved against ultra-low background (Fig 4A; bottom). In fact, using the "directionality index" approach to call TADs at 10-kbp resolution (Dixon et al, 2012), we find very similar organization in the presence or absence of cross-linking, with some additional subdomains emerging in iT2C (Appendix Fig S21D). Moreover, all seven CTCF-CTCF loops A B previously called in this 2.8-Mbp region (Rao et al, 2014) are picked up by iT2C (Appendix Fig S21E) and, overall, iT2C contacts are enriched for CTCF, H3K27ac, or H3K27me3 at the interacting sites ( Fig 4B). Treatment of HUVECs with the transcriptional inhibitor DRB does not dramatically alter the iT2C map (e.g., prelooping in SAMD4A persists; Fig 4A). This supports the notion of an overarching organization that is in part independent of transcription, and was affirmed when iT2C for the same locus was applied to IMR90s (Appendix Fig S22). Importantly, iT2C is devoid of signal from "bystander/baseline" interactions, allowing us to detect contacts over ultra-low background (Appendix Fig S21F), while contact structure close to the diagonal is reminiscent of that seen by "micro-C" (Hsieh et al, 2015). Finally, we provide proof-of-principle iHi-C ("all-to-all" i3C) under native conditions by using DpnII, incorporating biotin-dATP in ligation junctions, and sequencing to~3 × 10 8 reads. The resulting interaction maps were compared to conventional HUVEC Hi-C (and to in situ Hi-C from uncross-linked agar-encapsulated lymphoblasts; Rao et al, 2014; Appendix Fig S23A and B). Contact strength distribution over distance is not very different in these datasets, yet iHi-C can detect CTCF-CTCF loops more robustly, and resolves individual contacts with as few as 50 million reads (Appendix Fig  S23C-E). Last, in order to assess whether any contacts not captured in i3C are lost in the fraction that diffuses from nuclei upon cutting, we performed side-by-side iHi-C on the "lost" (in dilution) and "retained" (in situ) fractions, sequenced to > 2 × 10 8 reads, and compared the resulting interactions. Our analysis, exemplified by a representative region on chromosome 18, showed that very few interpretable contacts can be retrieved from the "lost" fraction, and these are often also found in the "retained" one (Appendix Fig S24).
In summary, i3C contact profiles display great similarity to conventional ones, thus alleviating most concerns about discrepancies due to fixation. Critically, our data verify the importance of topological restrictions imposed by TAD formation under native conditions, which highlights their regulatory implications in vivo. Moreover, the unattached chromatin lost in i3C renders captured interactions more focal, which can be advantageous when studying regions densely populated by cis-elements (like "super-enhancers"). Similarly, iT2C and iHi-C offer the potential to call loops at high resolution against essentially zero background without a need for excessive sequencing depth. Thus, we suggest that i3C offers a rapid and robust means for interrogating native spatial interactions; it dampens "bystander/baseline" ligations to increase signal quality, and so complements the existing toolkit for investigating 3D genome architecture in eukaryotes.

i3C
An adapted close-to-physiological, isotonic buffer (PB; 100 mM KCH 3 COO, 30 mM KCl, 10 mM Na 2 HPO 4 , 1 mM MgCl 2 , 1 mM Na 2 ATP, 1 mM DTT, 10 mM b-glycerophosphate, 10 mM NaF, 0.2 mM Na 3 VO 4 , and pH is adjusted to 7.4 using 100 mM KH 2 PO 4 ; Kimura et al, 1999) is prepared fresh every time in nuclease-free water (Millipore MilliQ), supplemented with 25 U/ml RiboLock (Thermo Scientific) and protease inhibitors (Roche), and kept on ice throughout the procedure. Typically, 5 × 10 6 cells are used per experiment, harvested in 4 ml of ice-cold PB from 15-cm culture plates using a soft rubber cell scraper (Roth) on ice. Harvested cells are spun at 600 g (4°C, 5 min), resuspended and incubated (ice, 10 min) in 10 ml of PB supplemented with 0.4% NP-40 to release nuclei. This step is usually repeated 1-2 times (ice, 5 min), and nuclei integrity is checked on a hemocytometer. Isolated nuclei are collected via centrifugation at 600 g (4°C, 5 min), gently resuspended in 500 ll of ice-cold PB/0.4% NP-40, and transferred to 2-ml round-bottom, low-retention tubes. Next, chromatin is digested with 500 units of ApoI or NlaIII (New England Biolabs; 33°C, 30-45 min) without shaking. Aliquots of 10 ll are put aside right before and after digestion as "uncut" and "cut" chromatin controls. Treated nuclei are then spun at 600 g (4°C, 5 min) to separate cut, unattached chromatin fragments that are released into the supernatant, washed in 500 ll of ice-cold PB, and respun. Following resuspension in 1 ml of ice-cold PB, spatially proximal chromatin ends are ligated together in intact nuclei (an idea based on the original "proximity ligation" assay by Cullen et al, 1993) and supported by recent findings that, even under cross-linked conditions, ligations predominantly occur within the "chromatin cage" of intact nuclei; Gavrilov et al, 2013) by adding 100 units of T4 DNA ligase (5 U/ll stock; Invitrogen) and 10 ll BSA (10 mg/ml stock; Sigma-Aldrich), and incubating at 16°C for 6-12 h without shaking. Finally, 25 ll proteinase K (10 mg/ml stock; AppliChem) are added to the samples, which are kept at 42°C overnight. Next day, samples are treated with 25 ll RNase A (10 mg/ml stock; AppliChem; 37°C, 1 h) and purified by phenol/chloroform extraction (pH 8.0) and ethanol precipitation. To reduce co-precipitating DTT, the aqueous phase volume is increased to 1 ml using nuclease-free water, 200 ll 3 M sodium acetate, and 5 ml absolute ethanol are added, and tubes are placed at À80°C for 30 min. Following centrifugation at 4,500 g (4°C, 1.5 h), pellets are washed in 5 ml 70% ethanol, air-dried for 20 min at room temperature, dissolved in 70-100 ll of TE (pH 8.0) at 37°C for 20 min, and the concentration of the i3C template determined using a Qubit 2.0 Fluorometer (Life technologies).
For i4C-seq, circularization and inverse PCR were as described previously (Stadhouders et al, 2013);~25 lg of i3C template are digested with 25 units of DpnII (New England Biolabs; 37°C, overnight). After heat inactivation (65°C, 25 min), DNA is diluted in ligation buffer to a volume of 7 ml, religated using 20 ll T4 DNA ligase (5 U/ll stock; Invitrogen; 16°C, 6-8 h), and purified. Then, ~150 ng of the circularized i3C template is used in inverse PCRs as follows: one cycle at 95°C for 2 min, followed by 34 cycles at 94°C for 15 s/56-58°C for 1 min/72°C for 3 min, before a final extension at 72°C for 7 min using 3.75 units of the Expand long template HF DNA Polymerase (Roche). Typically, eight such PCRs are pooled, purified using the DNA Clean & Concentrator kit (Zymo Research), and amplicons checked by electrophoresis on a 1.5% (wt/vol) agarose gel. The rest of the sample are directly sequenced on a HiSeq2500 platform (Illumina) as the primers used in inverse PCRs carry the P5/P7 Illumina adapters as overhangs. All primers used in this study are listed in Appendix Table S1.
For i3C-qPCR,~100 ng of the i3C/3C template was used. Primers were designed using Primer3Plus (www.bioinformatics.nl/cgi-bin/ primer3plus/primer3plus.cgi) to have a length of 18-23 nucleotides, a Tm of 58-62°C, and to yield amplimers of 70-150 bp. qPCRs (15 ll) were performed using the SYBR Green JumpStart Ready Mix (Sigma) on a Rotor-Gene Q cycler (Qiagen; one cycle of 95°C for 5 min, followed by 40 cycles at 95°C for 15 s, 61°C for 40 s, and 72°C for 20 s). i3C/3C amplimer levels were normalized to both a "loading" primer pair (for equiloading) and to templates prepared by cutting and ligating bacterial artificial chromosomes (BACs) spanning the studied loci of interest (controls for primer efficiency). All primers are available on request; all BAC's used in this study are listed in Appendix Table S2.

Data analysis
The analysis of high-throughput sequencing data from i4C-/4C-seq experiments was carried out using the fourSig (Williams et al, 2014) or FourCSeq (Klein et al, 2015) packages. In brief, 76-bp single-end reads from a HiSeq2000 platform (Illumina) were trimmed to remove the viewpoint primer sequence using homerTools (http:// homer.salk.edu/homer/). Trimmed reads were then mapped to the reference genome (hg19) using the short read aligner BWA-MEM (Li & Durbin, 2010; exact parameters were as follows: BWA MEM -t 8k 15 -r 1 -B 1 -M) and processed via fourSig or FourCSeq. Data were then visualized by uploading. BedGraph files to the UCSC genome browser (https://genome.ucsc.edu/; hg19) and using its embedded smoothing option. i4C-seq replicates and mapping efficiencies are listed in Appendix Table S3, and quality control/correlation plots (as in van de Werken et al, 2012) shown in Appendix Fig S7D and E.

Data availability
All i3C data generated here are available at the EBI Array Express archive under accession number E-MTAB-4719. Data generated using the conventional 3C approach are available at the Sequence Read Archive under the accession number SRP066044.
Expanded View for this article is available online.