Abstract
The powder mixture of gum arabic and maltodextrin was produced by spray drying. The inlet air temperature of spray dryer was varied from 160 °C to 260 °C and the maltodextrin content was varied from 0 to 50 % in the feed solution with the concentration of 42.5 % (w/v) total solids by weight. The properties of the finished product were characterized to examine the impact of changes in these operating parameters. The results showed that: the inlet air temperature had a stronger influence on the properties of finished product than the MD/GA ratio, whereas the feed rate was more clearly affected by the MD/GA ratio. Two optimal parameters obtained include MD/GA ratio equal to 0.615 and the inlet air temperature of spray dryer Te = 258 °C.
References
1. Masters K. Spray drying handbook. Burnt Mill, Harlow, Essex, England; New York: Longman Scientific & Technical; Wiley, 1991.Search in Google Scholar
2. Indyk H, Littlejohn V, Woollard DC. Stability of vitamin D3 during spray-drying of milk. Food Chem. 1996;57(2):283–286.10.1016/0308-8146(95)00225-1Search in Google Scholar
3. Corrigan DO, Healy AM, Corrigan OI. The effect of spray drying solutions of polyethylene glycol (PEG) and lactose/PEG on their physicochemical properties. Int J Pharm. 2002;235(1–2):193–205.10.1016/S0378-5173(01)00990-5Search in Google Scholar
4. Fazaeli M, Emam-Djomeh Z, Kalbasi Ashtari A, Omid M. Effect of spray drying conditions and feed composition on the physical properties of black mulberry juice powder. Food Bioprod Process. 2012;90(4):667–675.10.1016/j.fbp.2012.04.006Search in Google Scholar
5. Schutyser MA, Perdana J, Boom RM. Single droplet drying for optimal spray drying of enzymes and probiotics. Trends Food Sci Technol. 2012;27(2):73–82.10.1016/j.tifs.2012.05.006Search in Google Scholar
6. Vandenheuvel D, Singh A, Vandersteegen K, Klumpp J, Lavigne R, Van den Mooter G. Feasibility of spray drying bacteriophages into respirable powders to combat pulmonary bacterial infections. Eur J Pharm Biopharm. 2013;84(3):578–582.10.1016/j.ejpb.2012.12.022Search in Google Scholar PubMed
7. Oakley DE. Produce uniform particles by spray drying. Chem Eng Prog. 1997;93(10):48–54.Search in Google Scholar
8. Reineccius G. Source book of flavors. New York, NY: Chapman & Hall, 1994.10.1007/978-1-4615-7889-5Search in Google Scholar
9. Raja KC, Sankarikutty B, Sreekumar M, Jayalekshmy A, Narayanan CS. Material characterization studies of maltodextrin samples for the use of wall material. Starch/Stärke. 1989;41(8):298–303.10.1002/star.19890410805Search in Google Scholar
10. Kenyon MM. Modified starch, maltodextrin, and corn syrup solids as wall materials for food encapsulation. In: Risch SJ, Reineccius GA, editors. Encapsulation and controlled release of food ingredients. ACS Symposium Series. 590. Washington, DC: American Chemical Society, 1995:42–50.10.1021/bk-1995-0590.ch004Search in Google Scholar
11. McNamee BF, O’Riorda ED, O’Sullivan M. Emulsification and microencapsulation properties of gum arabic. J Agric Food Chem. 1998;46(11):4551–4555.10.1021/jf9803740Search in Google Scholar
12. Bringas-Lantigua M, Valdés D, Pino JA. Influence of spray-dryer air temperatures on encapsulated lime essential oil. Int J Food Sci Technol. 2012;47(7):1511–1517.10.1111/j.1365-2621.2012.02999.xSearch in Google Scholar
13. McNamee BF, O’Riorda ED, O’Sullivan M. Effect of partial replacement of gum arabic with carbohydrates on its microencapsulation properties. J Agric Food Chem. 2001;49(7):3385–3388.10.1021/jf001003ySearch in Google Scholar PubMed
14. Mujumdar AS. Handbook of industrial drying, 3rd ed. New York: Taylor & Francis Group, LLC, 2006:1312.10.1201/9781420017618Search in Google Scholar
15. Fuchs M, Turchiuli C, Bohin M, Cuvelier ME, Ordonnaud C, Peyrat-Maillard MN, et al. Encapsulation of oil in powder using spray drying and fluidised bed agglomeration. J Food Eng. 2006;75(1):27–35.10.1016/j.jfoodeng.2005.03.047Search in Google Scholar
16. Box GE, Wilson KB. On the experimental attainment of optimum conditions. J Royal Stat Soc Ser B (Methodological). 1951;13:1–45.10.1007/978-1-4612-4380-9_23Search in Google Scholar
17. Box GE, Hunter JS. Multi-factor experimental designs for exploring response surfaces. Ann Math Statist. 1957;28(1):195–241.10.1214/aoms/1177707047Search in Google Scholar
18. Box GE, Hunter WG, Hunter JS. Statistics for experimenters: an introduction to design, data analysis, and model building. USA: John Wiley & Sons, 1978:653.Search in Google Scholar
19. Nist/Sematech. e-Handbook of statistical methods 2012 [updated 2012] Available at http://www.itl.nist.gov/div898/handbook/files/275/handbook.html.Search in Google Scholar
20. Bhandari B, Bansal N, Zhang M, Schuck P. Handbook of food powders: processes and properties. Cambridge, UK: Woodhead Publishing, 2013 .10.1533/9780857098672Search in Google Scholar
21. NIRO. Analytical methods for dry milk products. Copenhagen, Denmark: A/S Niro Atomizer – GEA NIRO, 1978:109.Search in Google Scholar
22. Matsumura Y, Satake C, Egami M, Mori T. Interaction of gum arabic, maltodextrin and pullulan with lipids in emulsions. Biosci Biotechnol Biochem. 2000;64(9):1827–1835.10.1271/bbb.64.1827Search in Google Scholar PubMed
23. Samborska K, Gajek P, Kamińska-Dwórznicka A. Spray drying of honey: the effect of drying agents on powder properties. Polish J Food Nutr Sci. 2015;65(2):109–118.10.2478/pjfns-2013-0012Search in Google Scholar
24. Apv. APV dryer handbook. UK: APV Separations Product Group, APV Limited, 2000:80.Search in Google Scholar
25. Barbosa-Cánovas GV, Vega-Mercado H. Dehydration of foods. New York: Chapman & Hall, 1996:354.10.1007/978-1-4757-2456-1Search in Google Scholar
26. Toledo RT. Fundamentals of food process engineering. New York, USA: Springer Science & Business Media, 2007 .Search in Google Scholar
27. Woo M, Bhandari B. Spray drying for food powder production. Handbook of food powders. Cambridge, UK: Woodhead Publishing Limited, 2013:29–56.10.1533/9780857098672.1.29Search in Google Scholar
28. Islam M, Langrish T, Chiou D. Particle crystallization during spray drying in humid air. J Food Eng. 2010;99(1):55–62.10.1016/j.jfoodeng.2010.01.037Search in Google Scholar
29. Karataş Ş, Esin A. Determination of moisture diffusivity and behavior of tomato concentrate droplets during drying in air. Drying Technol. 1994;12(4):799–822.10.1080/07373939408959996Search in Google Scholar
30. Masters K. Spray dryers. In: Baker CG, editors. Industrial drying of foods. New York: Blackie Academic and Professional, 1997:90–114.10.1007/978-1-4613-1123-2_5Search in Google Scholar
31. Gong Z, Zhang M, Mujumdar AS, Sun J. Spray drying and agglomeration of instant bayberry powder. Drying Technol. 2007;26(1):116–121.10.1080/07373930701781751Search in Google Scholar
32. Goula AM, Adamopoulos KG, Kazakis NA. Influence of spray drying conditions on tomato powder properties. Drying Technol. 2004;22(5):1129–1151.10.1081/DRT-120038584Search in Google Scholar
33. Goula AM, Adamopoulos KG. Spray drying of tomato pulp in dehumidified air: II. The effect on powder properties. J Food Eng. 2005;66(1):35–42.10.1016/j.jfoodeng.2004.02.031Search in Google Scholar
34. Al‐Kahtani HA, Hassan BH. Spray drying of roselle (Hibiscus sabdariffa L.) extract. J Food Sci. 1990;55(4):1073–1076.10.1111/j.1365-2621.1990.tb01601.xSearch in Google Scholar
35. Mezhericher M, Levy A, Borde I. Theoretical drying model of single droplets containing insoluble or dissolved solids. Drying Technol. 2007;25(6):1025–1032.10.1080/07373930701394902Search in Google Scholar
36. Kim EH, Dong Chen X, Pearce D. On the mechanisms of surface formation and the surface compositions of industrial milk powders. Drying Technol. 2003;21(2):265–278.10.1081/DRT-120017747Search in Google Scholar
37. Charlesworth D, Marshall WR. Evaporation from drops containing dissolved solids. Aiche J. 1960;6(1):9–23.10.1002/aic.690060104Search in Google Scholar
38. Seydel P, Blömer J, Bertling J. Modeling particle formation at spray drying using population balances. Drying Technol. 2006;24(2):137–146.10.1080/07373930600558912Search in Google Scholar
39. Barbosa-Cánovas GV, Ortega-Rivas E, Juliano P, Yan H. Food powders: physical properties, processing, and functionality. New York: Kluwer Academic/Plenum Publishers, 2005:382.Search in Google Scholar
40. Walton DE, Mumford CJ. The morphology of spray-dried particles: the effect of process variables upon the morphology of spray-dried particles. Chem Eng Res Des. 1999;77(5):442–460.10.1205/026387699526296Search in Google Scholar
41. Abdullah E, Geldart D. The use of bulk density measurements as flowability indicators. Powder Technol. 1999;102(2):151–165.10.1016/S0032-5910(98)00208-3Search in Google Scholar
42. Reineccius G. Spray-drying of food flavors. In: Reineccius G, Risch SJ, editors. Flavor encapsulation. ACS Symposium Series. 370. Washington, DC: American Chemical Society, 1988:55–66.10.1021/bk-1988-0370.ch007Search in Google Scholar
43. Nurhadi B, Andoyo R, Mahani RI. Study the properties of honey powder produced from spray drying and vacuum drying method. Int Food Res J. 2012;19(3):907–912.Search in Google Scholar
44. Al-Assaf S, Phillips GO, Williams PA. Studies on acacia exudate gums. Part I: the molecular weight of Acacia senegal gum exudate. Food Hydrocoll. 2005;19(4):647–660.10.1016/j.foodhyd.2004.09.002Search in Google Scholar
45. Al-Assaf S, Phillips GO, Williams PA. Studies on Acacia exudate gums: part II. Molecular weight comparison of the Vulgares and Gummiferae series of Acacia gums. Food Hydrocoll. 2005;19(4):661–667.10.1016/j.foodhyd.2004.09.003Search in Google Scholar
46. Schuck P. Dehydrated dairy products, milk powder: physical and functional properties of milk powders. In: Fuquay JW, Fox PF, McSweeney PL, editors. Encyclopedia of dairy sciences. London, UK: Elsevier Science, 2011 .10.1016/B978-0-12-374407-4.00122-9Search in Google Scholar
© 2017 Walter de Gruyter GmbH, Berlin/Boston