Evaluation of costs and reworks in the tires recovery process by the Monte Carlo Method: case study
Article Sidebar
Main Article Content
صندلی اداریAbstract
Companies are increasingly seeking methods to eliminate costs, and one of the big problems in companies is rework. The objective of this study was to identify costs and rework through the application of quality tools, allied to the Monte Carlo method (MMC), comprising the productive process of tire retreading, through an exploratory study. The applied methodology was in a tire retreading industry, located in the southern Fluminense region, in the state of Rio de Janeiro. One can conclude from the use of quality tools that the main failures within the process were the vulcanization, bonding and scarification / repair and also analyze by the Monte Carlo method the costs presented in the tire reform process through 5000 interactions. Through the tools, we can quantify the failures occurred in each stage. The main contribution of this work is the identification of the costs caused by the rework in the tires of automobiles and of load.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
1. Proposal of Policy for Free Access Periodics
Authors whom publish in this magazine should agree to the following terms:
a. Authors should keep the copyrights and grant to the magazine the right of the first publication, with the work simultaneously permitted under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 that allows the sharing of the work with recognition of the authorship of the work and initial publication in this magazine.
b. Authors should have authorization for assuming additional contracts separately, for non-exclusive distribution of the version of the work published in this magazine (e.g.: to publish in an institutional repository or as book chapter), with recognition of authorship and initial publication in this magazine.
c. Authors should have permission and should be stimulated to publish and to distribute its work online (e.g.: in institutional repositories or its personal page) to any point before or during the publishing process, since this can generate productive alterations, as well as increasing the impact and the citation of the published work (See The Effect of Free Access).
Proposal of Policy for Periodic that offer Postponed Free Access
Authors whom publish in this magazine should agree to the following terms:
a. Authors should keep the copyrights and grant to the magazine the right of the first publication, with the work simultaneously permitted under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 [SPECIFY TIME HERE] after the publication, allowing the sharing of the work with recognition of the authorship of the work and initial publication in this magazine.
b. Authors should have authorization for assuming additional contracts separately, for non-exclusive distribution of the version of the work published in this magazine (e.g.: to publish in institutional repository or as book chapter), with recognition of authorship and initial publication in this magazine.
c. Authors should have permission and should be stimulated to publish and to distribute its work online (e.g.: in institutional repositories or its personal page) to any point before or during the publishing process, since this can generate productive alterations, as well as increasing the impact and the citation of the published work (See The Effect of Free Access).
d. They allow some kind of open dissemination. Authors can disseminate their articles in open access, but with specific conditions imposed by the editor that are related to:
Version of the article that can be deposited in the repository:
Pre-print: before being reviewed by pairs.
Post-print: once reviewed by pairs, which can be:
The version of the author that has been accepted for publication.
The editor's version, that is, the article published in the magazine.
At which point the article can be made accessible in an open manner: before it is published in the magazine, immediately afterwards or if a period of seizure is required, which can range from six months to several years.
Where to leave open: on the author's personal web page, only departmental websites, the repository of the institution, the file of the research funding agency, among others.
References
BACIC, M. J.; MEGLIORINI, E.; OLIVEIRA, E. C. M.; YOMURA, N. (2011) Manual de técnicas e práticas de gestão estratégica de custos nas pequenas e médias empresas. Conselho Regional de Contabilidade do Estado de São Paulo.
BOMFIM, E. A.; PASSARELLI, J. (2011) Custos e formação de preços.7 ed.- São Paulo: IOB.
BREITMAN, K. K. (2012) Arcabouço para desenvolvimento de serviços baseados na Simulação de Monte Carlo na Cloud. Dissertação (Mestrado em Informática), PUC-Rio.
CAMPOS, V. F. (2014) TQC: controle da qualidade total. Belo Horizonte: Fundação CristianoOttoni/UFMG.
CAMPOS, Y. G. (2012) A importância da gestão de custos. Disponível em: <http://www.administradores.com.br/artigos/negocios/a-importancia-da-gestao-de-custos/63090>, acessado em 06 de maio de 2019.
FERMINO, M.; DANTAS, F.; CÂNDIDO, J.; COSTA, A. E.; PAULA, G. A.; PAULA, G. L. S. (2012) Método Monte Carlo para Análise de Risco. Book of Proceedings. Algarve.
FONTOURA, F. B. B. (2013) Gestão de custos uma visão integradora e prática dos métodos de custeio. São Paulo Atlas.
HEGAZY, T.; SAID, M.; KASSAB, M. (2011) Incorporating rework into construction schedule analysis. Automation in Construction, v. 20, n. 8, p. 1051-1059.
MARRONE, P. V. (2015) Livro branco da indústria de pneus – uma política industrial para o setor. São Paulo. ANIP.
MATOS, G. G. (2014) Comunicação empresarial sem complicação. Barueri: Manole, 3ª ed.
OLIVEIRA, D. V. C. (2016) Contabilidade de custos: um estudo de caso sobre o ponto de equilíbrio de uma empresa no ramo faccionista têxtil. Trabalho de Conclusão de Curso (Ciências Contábeis), Universidade Rio Grande do Norte.
OLIVEIRA, R. (2017) Reformador de pneus é essencial para o segmento de transporte no Brasil. Revista Pnews, ed. 100, São Paulo.
PALADINI, E. P.; BOUER, G.; FERREIRA, J. J. A.; CARVALHO, M. M.; MIGUEL, P. A. C.; SAMOHYL, R. W.; ROTONDARO, R. G. (2012) Perspectiva estratégica da qualidade. In: CARVALHO, M. M.; PALADINI, E. P. (Org.) Gestão da Qualidade: Teoria e Casos.2 ed. Rio de Janeiro: Elsevier.
PAULA, R. R.; DIAS, M. S. (2014) Método de Monte Carlo e Aplicações. 2014, 11 fl. Trabalho de Conclusão de Curso - (Matemática) – Universidade Federal Fluminense (UFF), Volta Redonda, RJ.
PILLOT, B.; DE SIQUEIRA, S.; DIAS, J. B. (2018) Grid parity analysis of distributed PV generation using Monte Carlo approach: The Brazilian case. Renewable Energy, v. 127, p. 974–988.
Project Management Institute – PMI. (2013) PMBOK: project management book of knowledge (5. ed.). Pensilvânia.
SANTOS, J. J. (2011) Contabilidade e análise de custos: modelo contábil, Métodos de depreciação, ABC-Custeio Baseado em Atividades, Análise atualizada de encargos sociais sobre salários, custos de tributos sobre compras e vendas. 6ª ed.–São Paulo: Atlas.
TOLEDO, J. C.; BORRÁS, M. A. A.; MERGULHÃO, R. C.; MENDES, G. H. S. (2014) Qualidade: gestão e métodos. Rio de Janeiro: LTC.
VALERIE, L. S. (2011) Waste, p. 297-320.
VALERIE, L. S. (2019) Waste, 2 ed., p. 489-515.
YIN, R. K. (2010) Estudo de caso: planejamento e métodos.4 ed.- Porto Alegre: Bookman.
ZANATTA, J. M.; FEDERAL, U.; MARIA, D. S. (2017)Análise de custos e preço de venda em uma distribuidora de produtos alimentícios. Revista Observatorio de la Economía Latinoamericana, Brasil.