Correction: Designer Sinorhizobium meliloti strains and multi-functional vectors enable direct inter-kingdom DNA transfer

[This corrects the article DOI: 10.1371/journal.pone.0206781.].


Introduction
The field of synthetic biology aims to utilize existing or novel biological parts and systems to create organisms that can help address global problems including increased demand for food, fuel, therapeutics, and high value chemicals.However, one of the major obstacles in synthetic biology is that many organisms of interest lack genetic tools such as autonomously replicating plasmids, well characterized promoters and terminators, selective markers, genome-editing tools, and protocols to uptake and install DNA [1,2].This problem can be addressed by cloning whole chromosomes or large DNA fragments from an organism of interest in a surrogate host, where genetic tools are in place and manipulations can be performed [3][4][5].Currently, the most common host for the capture and manipulation of DNA fragments is Saccharomyces cerevisiae [6][7][8][9][10], however returning cloned or engineered fragments to destination cells is still challenging due to the lack of direct transfer methods from S. cerevisiae, such as bacterial conjugation.In addition, S. cerevisiae cannot maintain large DNA fragments with G+C content >40% without additional engineering [11][12][13], and many industrially useful bacterial strains have a G+C content above this range.For example, Streptomyces species have a G+C content >65% and are important for the production of antibiotics (gentamicin, kanamycin, tetracycline, etc.) [14].Therefore, it is desirable to develop a host to clone, maintain, manipulate, and transfer DNA fragments, including high G+C content, to bacterial and eukaryotic destination cells.
Sinorhizobium meliloti is an attractive host candidate for this application.S. meliloti is a Gram-negative α-Proteobacterium that forms a symbiotic relationship with legume plants where it fixes nitrogen in root nodules, and therefore is highly important in agriculture.S. meliloti model strain Rm1021 has a multipartite genome including a chromosome (3.65 Mb), pSymA megaplasmid (1.35 Mb), and pSymB chromid (1.68 Mb) [15].Multiple derivatives of S. meliloti now exist that vary in genome size, nutrient requirements and generation time [16].Recently, a derivative of S. meliloti with a minimal genome lacking the pSymA and pSymB replicons was developed, resulting in a 45% reduction of the genome [16].Two essential genes were identified in the pSymB chromid, engA and tRNA arg , and these genes were transferred to the main chromosome [17].The replication origins of pSymA and pSymB were identified and characterized [18], and can be used to generate designer replicating plasmids.Additionally, several genetic tools have been developed for this species including vectors based on repABC origins taken from various α-Proteobacteria that can be propagated in S. meliloti [19].Three of these vectors can be maintained within wildtype S. meliloti at one time, along with the endogenous pSymA and pSymB replicons.Utilizing these vectors, an in vivo cloning method with Cre/lox-mediated translocation of large DNA fragments to the repABC-based vector was established [19].Therefore, S. meliloti is an attractive host organism due to its high G+C content genome (62%) [20], available origins of replication that could be used to maintain large DNA fragments, expanding genetic toolbox, and applications in agriculture.
S. meliloti is also an attractive host bacterium because it is able to move DNA to other organisms using several methods.Previous studies have demonstrated DNA transfer methods from S. meliloti through introduction of a Ti plasmid to plant species through mobilization of TDNA [21].In addition, S. meliloti is able to move DNA to bacteria via conjugation in triparental mating experiments [19].
Installing a conjugative plasmid into S. meliloti, such as pTA-Mob, will allow for faster and more efficient transfer of DNA to a recipient organism.The conjugative pTA-Mob plasmid, which contains all of the genes required for direct DNA transfer via conjugation, can mobilize any additional cargo plasmid containing an origin of transfer (oriT).Conjugation is a particularly attractive method of DNA transfer to streamline the workflow for genetic manipulation of organisms.While transfer of DNA from S. meliloti to bacterial cells has been demonstrated, DNA transfer to eukaryotic cells, such as yeast and algae, has not been previously described.
Here, we utilized the reduced genome strains of S. meliloti [16] to create designer strains with the restriction-system removed and the conjugative pTA-Mob [22] plasmid installed.In addition, we used identified origins from S. meliloti pSymA and pSymB replicons to create multi-host shuttle (MHS) vectors that replicate in S. meliloti, Escherichia coli, S. cerevisiae, and Phaeodactylum tricornutum.The MHS vectors were tested for their ability to provide antibiotic resistance and propagate in S. meliloti.These vectors were moved into S. meliloti strains via an optimized electroporation protocol, via a newly developed polyethylene glycol (PEG) method, or via conjugation from E. coli.Most notably, we have developed protocols to directly transfer the MHS vectors via conjugation from S. meliloti to E. coli, S. cerevisiae, and P. tricornutum.

Development of designer bacterial strains
Initially, we engineered S. meliloti strains to remove the restriction-system (ΔhsdR) to allow for development of more efficient transformation methods.Disruption or deletion of the hsdR gene has been previously reported in the Rm1021 strain of S. meliloti, and deletion mutants were shown to have enhanced transformation efficiencies [19,23].In our reduced S. meliloti strains, either lacking one or both of the pSymA or pSymB replicons, the hsdR gene was replaced by a FRT-Km/Nm-FRT cassette and the resulting ΔhsdR::Nm mutant allele was transferred to various background strains via transduction of Nm r .The FRT-Km/Nm-FRT cassette was then removed by introducing an unstable plasmid (pTH2505) carrying the Flp recombinase, followed by curing of this plasmid.The hsdR deletion strains were verified to have the hsdR gene successfully deleted using diagnostic PCR with primers located upstream and downstream of the hsdR gene locus (Figure A in S1 File).S. meliloti RmP4098 ΔpSymA ΔhsdR, retaining the Km/Nm cassette and the pSymB chromid, was chosen as our host strain as it had the fastest doubling time when compared to the other reduced-genome strains [16].S. meliloti ΔpSymA ΔhsdR, was transformed with the pTA-Mob plasmid [22] and used as the conjugative donor strain for all subsequent experiments (Fig 1A).In addition, reduced S. meliloti strains RmP3952 ΔpSymB ΔhsdR and RmP3909 ΔpSymAB ΔhsdR were developed using the same method described above.
Additionally, a designer E. coli strain was developed to simplify the current method of conjugation from E. coli.We used lambda red recombination to create an auxotrophic strain of E. coli Epi300, named ECGE101, by deleting the dapA gene.This gene is required for synthesis of diaminopimelic acid (DAP) [24], therefore ECGE101 requires DAP supplementation in the growth media and provides a useful, antibiotic-free method for counter-selecting E. coli after conjugation to S. meliloti or any other organism.

Design, assembly and characterization of multi-host shuttle vectors
With the reduced, restriction-system minus strains of S. meliloti created, and the origins of replications of the large megaplasmid and chromid (repA1B1C1 and repA2B2C2) identified, MHS vectors were developed as cargo plasmids for conjugation from S. meliloti to various recipients.Six MHS vectors were designed and constructed to allow for stable replication and selection in our S. meliloti conjugative donor, as well as several conjugative recipient organisms including E. coli, S. cerevisiae, and P. tricornutum.These organisms were chosen as conjugative recipients as they are well-characterized model strains for bacterial, yeast and algal systems.These vectors were constructed with a bacterial artificial chromosome (BAC) and yeast artificial chromosome (YAC) backbone allowing for replication in E. coli and S. cerevisiae [25].The YAC also allows replication in P. tricornutum [25,26].The MHS vectors contain an origin of replication captured from the native megaplasmid of S. meliloti, pSymA (repA2B2C2, denoted pAGE vectors), or the pSymB chromid (repA1B1C1, denoted pBGE vectors).Selectable markers include spectinomycin (Sp), tetracycline (Tc), or kanamycin/neomycin (Km/Nm) resistance for S. meliloti (but also conferring some resistance in E. coli), nourseothricin N-acetyl transferase (Ntc) for P. tricornutum [27], HIS3 for S. cerevisiae, and chloramphenicol (Cm) resistance for E. coli.Finally, all MHS vectors contain an origin of transfer (oriT) that is acted on by proteins encoded on the conjugative plasmid pTA-Mob, and is necessary for mobilization of the MHS vectors from S. meliloti to recipient organisms (Fig 1B).Three versions of the pAGE vector differing only in the S. meliloti selective marker, pAGE1.0(Sp), pAGE2.0(Tc), and pAGE3.0(Km/Nm), were constructed with the pSymA origin (repA2B2C2).An additional three pBGE vectors differing only in the S. meliloti selective marker, pBGE1.0(Sp), pBGE2.0(Tc), and pBGE3.0(Km/Nm), were constructed with the pSymB origin (repA1B1C1).Once Vector map of pAGE/pBGE MHS vector with both standard and interchangeable components.Standard components include the BAC and YAC backbone (BAC/YAC), an origin of transfer (oriT), and the selectable marker for P. tricornutum nourseothricin N-acetyl transferase (Ntc).Interchangeable components include selectable markers for S. meliloti: tetracycline (Tet), kanamycin/neomycin (Neo), and spectinomycin (Spec); and origins of replication for S. meliloti: the pSymA origin (repA2B2C2), and pSymB origin (repA1B1C1).Three vectors (pAGE1.0,pAGE2.0,and pAGE3.0)were constructed utilizing the repA2B2C2 origin with Spec, Tet or Neo selection, respectively.Three vectors (pBGE1.0,pBGE2.0,and pBGE3.0)were constructed utilizing the repA1B1C1 origin with Spec, Tet or Neo selection, respectively.(c) Following conjugation of three pAGE plasmids from E. coli ECGE101 conjugative strain to S. meliloti RmP4122 ΔpSymA ΔhsdR Nm s , an antibiotic selection test for each plasmid was performed.The pAGE1.0, pAGE2.0,and pAGE3.0vectors in S. meliloti contain antibiotic resistance markers for Spec, Tet, and Neo, respectively.S. meliloti without a plasmid (control) was plated alongside S. meliloti harbouring pAGE1.0,pAGE2.0,or pAGE3.0 on LBmc agar, and LBmc agar supplemented with either spectinomycin (200 μg mL -1 ), tetracycline (10 μg mL -1 ), or neomycin (100 μg mL -1 ).https://doi.org/10.1371/journal.pone.0206781.g001assembled [28], the vectors were transformed into E. coli Epi300 (Epicentre) cells, isolated and confirmed to be correctly assembled by a diagnostic restriction digest (Figure B in S1 File).The three pAGE vectors were conjugated to S. meliloti RmP4122 ΔpSymA ΔhsdR Nm s from E. coli ECGE101 conjugative strains, and S. meliloti transconjugants were plated on their respective antibiotic selections.We demonstrated that pAGE1.0,pAGE2.0,and pAGE3.0 in S. meliloti provide resistance to Sp, Tc, and Nm, respectively (Fig 1C).Following transformation of pAGE2.0into S. meliloti RmP4122 ΔpSymA ΔhsdR Nm s , vector stability was tested by iterative subculturing every 10 generations to a total of about 50 generations.We observed, on average, that approximately 25% of vectors were lost after 50 generations, as determined by the number of colonies unable to grow on selective media (LBmc 38 μM FeCl 3 2 μM CoCl 2 Tc 5 μg/mL) after restreaking from non-selective media (LBmc

Optimization of DNA transfer to S. meliloti via electroporation, a new polyethylene glycol transformation method and conjugation
In order to develop S. meliloti as a host, a highly efficient transformation method is required for the uptake of DNA.Currently, the most common transformation method used in S. meliloti is electroporation.Optimization of this method through transformation of S. meliloti RmP4122 ΔpSymA ΔhsdR Nm s with three pAGE vectors (~18 kb) produced efficiencies averaging 1.4 x 10 5 CFU μg -1 of DNA (Figure D in S1 File and Table B in S2 File).Additionally, since a PEG transformation method was successfully applied to move large DNA fragments (>1 Mb) in the transplantation protocol required to create the first synthetic cell [4], we developed a PEG-mediated transformation method in S. meliloti and were able to obtain efficiencies on average of 2.1 x 10 3 CFU μg -1 of DNA (Figures E and F in S1 File and Table B in S2 File).In addition, conjugation has been previously established as a method of DNA transfer to S. meliloti [19,29], therefore we have developed an improved conjugation protocol from our conjugative E. coli ECGE101 strain carrying the pTA-Mob and pAGE1.0vectors.Using this method we obtained a conjugation efficiency averaging 4 transconjugants per every 10 recipient cells (Table B in S2 File).

Direct DNA transfer (via conjugation) from S. meliloti to E. coli, S. cerevisiae and P. tricornutum
We utilized the designer S. meliloti RmP4098 ΔpSymA ΔhsdR host strain carrying the pTA--Mob conjugative plasmid and pAGE1.0compatible genome engineering vector to develop direct DNA transfer of pAGE1.0(via conjugation) from S. meliloti to E. coli, S. cerevisiae, and P. tricornutum (Fig 2A -2C and 2E).The ~18 kb pAGE1.0vector contains the pSymA origin (repA2B2C2) and the spectinomycin selectable marker for S. meliloti.Conjugation efficiencies were calculated as the number of transconjugants per recipient cell from the S. meliloti conjugative donor to E. coli, S. cerevisiae, and P. tricornutum as 2.22 x 10 −1 , 7.99 x 10 −6 and 9.40 x 10 −5 , respectively (Fig 3 and Table C in S2 File).Additionally, we have developed a high throughput conjugation protocol in a 96-well plate from S. meliloti to P. tricornutum that could be used for large-scale experiments and in an automated facility (Fig 2D and 2E).Development of these direct DNA transfer protocols is a critical step in the development of S. meliloti as a robust host for genome engineering and will facilitate its use in synthetic biology applications.
Next, we evaluated the conjugated pAGE1.0vectors for DNA rearrangements and potential mutations that could have been introduced during conjugation from S. meliloti to E. coli, S. cerevisiae and P. tricornutum.In the first case, 20 E. coli transconjugant vectors were induced with 0.1% arabinose to obtain high copy number and were directly isolated from E. coli.The pAGE1.0 vector replicates as a low-copy plasmid in S. cerevisiae and P. tricornutum and it cannot be induced with arabinose to obtain high copy number within these species.Therefore, 60 vectors from S. cerevisiae and P. tricornutum transconjugants were isolated and transformed into E. coli, then induced and once again isolated to obtain high quality DNA.DNA isolated from 59 out of 60 S. cerevisiae transconjugants and 58 out of 60 P. tricornutum transconjugants resulted in E. coli colonies following transformation (Table D in S2 File).Then, 20 E. coli transformants (each transformed with DNA from independent S. cerevisiae colonies) and 30 E. coli transformants (each transformed with DNA from independent P. tricornutum colonies) were selected, induced with 0.1% arabinose, and the vector DNA was isolated.Diagnostic restriction digests were performed on these vectors using EcoRV-HF, and the number of vectors with the expected banding pattern was 18/20 originating from E. coli, 19/20 originating from S. cerevisiae and 16/30 originating from P. tricornutum (Figures G-I in S1 File and Table D in S2 File).Therefore, we can observe that correct pAGE1.0vectors can be rescued when conjugated from S. meliloti 90% of time in E. coli, 93% of the time in S. cerevisiae, and 52% of the time in P. tricornutum.Finally, sequencing of pAGE1.0plasmids recovered from E. coli, S. cerevisiae and P. The S. meliloti RmP4098 ΔpSymA ΔhsdR strain used is resistant to streptomycin (100 μg mL -1 ) and requires Fe (38 μM FeCl 3 ) supplementation for growth.The pAGE1.0 plasmid used confers resistance to spectinomycin (200 μg mL -1 ).Media supplementation may vary with chosen S. meliloti host and MHS vector.(a) Schematic of protocol for conjugation of pAGE1.0 from S. meliloti to E. coli.(b) Schematic of protocol for conjugation of pAGE1.0vector from S. meliloti to S. cerevisiae.(c) Schematic of protocol for conjugation of pAGE1.0vector from S. meliloti to P. tricornutum-standard protocol.Note that ¼ salt L1 plates were made with ¼ aquil salts concentration (half that of typical ½ L1 plates), keeping all other components the same as in ½ L1 plates.(d) Schematic of protocol for conjugation of pAGE1.0vector from S. meliloti to P. tricornutum-96-well plate protocol.(e) Examples of plates containing transconjugants resulting from conjugation from S. meliloti to E. coli, S. cerevisiae, and P. tricornutum (standard and in a 96-well plate).P. tricornutum transconjugants from the 96-well plate protocol are shown with 100 uL plated on a full plate, and 10 uL spot plated and serially diluted.tricornutum transconjugants with a correct banding pattern following digestion with EcoRV-HF, revealed that no significant mutations were introduced.
In summary, pAGE and pBGE MHS vectors were developed and shown to be stably propagated in S. meliloti, E. coli, S. cerevisiae, and P. tricornutum.These multi-host and multi-functional vectors have promising applications for the cloning of large, high G+C content DNA fragments and their direct transfer to prokaryotic and eukaryotic target organisms.Conjugation of these vectors from S. meliloti to E. coli, S. cerevisiae, and P. tricornutum, as well as showing S. meliloti as a conjugative recipient, illustrates that S. meliloti can be a suitable host organism for inter-kingdom transfer of DNA.Due to the range of recipient organisms demonstrated, conjugation could be expanded to other target organisms in the future.These hosts will be invaluable for the cloning and installation of genes, synthetic chromosomes, or large biosynthetic pathways, the study of organisms lacking genetic tools, and specifically for applications in industrially and agriculturally important strains such as plants, marine organisms, and soil microbiomes.

Development of ΔhsdR S. meliloti strains
Designer S. meliloti strains used in this study were created by taking the strain RmP3500, which lacks pSymA and pSymB where the engA-tRNA Arg -rmlC genomic region has been introduced into the chromosome [30] and re-introducing either pSymA or pSymB or both.Specifically, RmP4098, was made by re-introducing pSymB from RmP3491 into the strain RmP3910, which is derived from RmP3500, to create the strain RmP3950.From there, a Nm resistance cassette from strain RmP3975 was transduced into strain RmP3950.Double homologous recombination of the Nm cassette from RmP3975 into the genome of RmP3950 was selected on Nm Sm plates.The resulting strain, RmP4098, is ΔpSymA pSymB+ hsdR::Nm, Nm R Sm R .
RmP3975 is a strain where the hsdR restriction gene has been replaced by a Nm resistance cassette.This strain was created by first PCR amplifying a downstream region and upstream region of the hsdR gene and cloning these PCR products into the XbaI site of pUCP30T using SLiC [31], then transforming into chemically competent DH5α.This construct was then verified via sequencing using M13 universal primers.The pUCP30T plasmid (Gm R ) with the hsdR upstream/downstream regions was then transformed into an E. coli strain harboring pKD46 (Amp R ) which includes genes for lambda red recombinase, the resulting strain was named M2453.A Km/Nm cassette for hsdR deletion was then PCR amplified using high-fidelity DNA polymerase and purified.The cassette consisted of the antibiotic resistance gene flanked by regions of homology to the hsdR regions cloned into pUCP30T.The cassette was then electroporated into competent M2453 cells (grown in 1mM Arabinose to induce lambda red recombinase genes) and selected using Km (25 μg mL -1 ).Cells were then patched on Km (25 μg mL - 1 ), Gm (10 μg mL -1 ) and Amp (100 μg mL -1 ).A Km R , Gm R , and Amp S strain was then streak purified and named M2459.The resulting vector was then conjugated into RmP110 as recipient and M2459 as donor.Selection was done in Sm (200 μg mL -1 ) Nm (200 μg mL -1 ) plates.Resulting transconjugants were then patched on Gm (10 μg mL -1 ), (Nm 200 μg mL -1 ) and Sm (200 μg mL -1 ) plates and a Gm sensitive colony was streak purified (indicating double recombination of cassette with hsdR locus).The strain was then verified using diagnostic primers that spanned the hsdR upstream/downstream region with the Km/Nm cassette.
The Nm resistance cassette was then able to be transduced into the S. meliloti strains containing various combinations of pSymA and pSymB and selecting for Nm resistance.The Nm resistance cassette was then excised by introducing Flp recombinase to flip out the cassette using flanking FRT sites.The resulting strains are are RmP4258 (pSymA-pSymB-ΔhsdR), RmP4260 (pSymA+ pSymB-ΔhsdR), RmP4124 (pSymA-pSymB+ ΔhsdR), and RmP4125 (pSymA+ pSymB+ ΔhsdR).

Development of E. coli ECGE101 ΔdapA strain
The dapA gene replacement with lambda pir and an erythromycin cassette from strain βDH10B was replicated in Epi300, resulting in a strain containing trfA and requirement of diaminopimelic acid (DAP) supplementation for growth.This is useful because it allows for replication of plasmids with RK2 oriV and makes it a convenient donor in biparental conjugation because the DAP requirement eliminates the need for antibiotic counter-selection.A lambda red recombinase plasmid (pKD46) was electroporated into Epi300, because Epi300 is recA-.The dapA region from βDH10B was amplified using the flanking primers DAP1 and DAP2.The fragment was electroporated into E. coli Epi300 containing pKD46 and transformants were selected on LB with DAP (60 μg mL -1 ) and erythromycin (200 μg mL -1 ), and inability to grow in the absence of DAP was confirmed.Such transformants were cured of pKD46 by growing at 37˚C and confirming ampicillin (100 μg mL -1 ) sensitivity.

Vector construction (pAGE/pBGE multi-host shuttle vectors)
Briefly, pAGE and pBGE vectors were constructed based on the pCC1BAC vector to which elements for replication in yeast were added.This backbone was amplified from plasmid p0521s (created at Venter institute and available on Addgene).This will allow replication and selection in yeast and E. coli.Additionally, it is low copy vector that can be induced to high copy with arabinose.Other components amplified for vector assembly include the antibiotic resistance cassettes for selection in S. meliloti, repA2B2C2 or repA1B1C1 for replication in S. meliloti, origin of transfer (oriT) for conjugation, and selective marker for algae (Ntc).The six fragments were PCR amplified and assembled in yeast using a yeast spheroplast transformation method.Next, DNA was isolated from yeast and moved to E. coli strain PG5alpha and genotyped using a multiplex PCR screen.Correct vectors were moved from PG5alpha to Epi300 and Epi300 pTA-Mob.Diagnostic digests were performed to confirm correct assembly of vectors.

Vector stability assay of pAGE2.0
To characterize the ability of the ΔhsdR strains to maintain these large pAGE vectors, stability assays were performed to determine how long pAGE2.0can be maintained in RmP4122 ΔpSy-mAΔhsdRNm s .This was performed in triplicate.Single colonies harboring pAGE2.0 were inoculated into LBmc FeCl 3 + CoCl 2 with Tc (5μg mL -1 ) at 30˚C.The next day, 100uL of culture diluted to 10 −6 was plated on LBmc FeCl 3 + CoCl 2 and grown 3 days at 30˚C.Cultures were subcultured 1000X in LBmc FeCl 3 + CoCl 2 without antibiotics and grown overnight.Approximately 10 doublings occurred per day.The next day, cultures were diluted to 10 −6 and again 100μL was plated on LBmc FeCl 3 + CoCl 2 .Cultures were subcultured again as before.When visible, 100 colonies were patched onto LBmc FeCl 3 + CoCl 2 with Tc (5μg mL -1 ) and without Tc as a control to ensure colony viability.These plates were incubated at 30˚C for 3 days.The number of patched colonies that were able to grow on selective media was then recorded.The experiment was performed for 5 days to assess stability of pAGE2.0.

Electroporation of S. meliloti
Preparation of competent S. meliloti cells for electroporation.Grow 500 mL of S. meliloti overnight in LBmc, 38 μM FeCl 3 , and streptomycin 100 μg mL -1 at 30˚C with shaking incubation to an OD 600 of 2.0.Incubate flask on ice for 10 min then pellet at 6000 x g at 4˚C for 10 min.Resuspend cells in 250 mL of sddH 2 O by gentile agitated in a water bath, top up volume to 500 mL, then pellet with the same conditions.Repeat this wash step with sddH 2 O two additional times, and then repeat once more with the same volume of 10% glycerol.Resuspend the pellet in 3 mL of 10% glycerol, flash freeze 200 μL aliquots and store at -80˚C.
Electroporation of S. meliloti.Incubate frozen cells on ice until fully thawed (about 15 min).Add 50 ng (in 1 μL) of DNA to 50 μL of competent cells in a 1.5 mL Eppendorf tube on ice, flick to mix, and incubate on ice for 5 min.Add transformation mixture to a 0.1 mm path length cuvette on ice and electroporate at 1.8 kV.Immediately add 1 mL LBmc 38μM FeCl 3 and recover in a test tube at 30˚C with shaking incubation (225rpm) for 120 min.Spread 500 μL of the transformation mixture on LBmc plates containing 38 μM FeCl 3 , 100 μg mL -1 streptomycin, and an appropriate concentration of antibiotic selection based on the transformed DNA.Incubate plates at 30˚C for 3 days to allow for colony formation.

PEG-mediated transformation of S. meliloti
Preparation of competent S. meliloti cells for PEG-mediated transformation.S. meliloti cells were cultured overnight in LBmc, 38μM FeCl 3 , and 100 μg mL -1 streptomycin at 30˚C with shaking incubation (225rpm).Upon reaching OD 600 = 0.4, cells were harvested into sterile 500 mL centrifuge bottles, incubated on ice for 10 minutes, and pelleted at 4000 x g and 4˚C for 10 minutes.Cells were then resuspended in 100 mL of ice-cold 100 mM CaCl 2 by gentle pipetting and incubated on ice for an additional 30 minutes.Following incubation, cells were pelleted again at 4000 x g and 4˚C for 10 minutes and resuspended in 1.25 mL of ice-cold 100 mM CaCl 2 + 15% glycerol.The final resuspension volume was split into 25 μL aliquots, flash frozen using liquid nitrogen, and stored at -80˚C for later use.
PEG-mediated transformation of S. meliloti.Frozen cells (25 μL aliquots) were incubated on ice until fully thawed.Next, 200 ng (in 3 μL) of supercoiled pAGE DNA and 25 μL of 10% PEG 4000 were then added to the reaction tube and mixed evenly by gentle pipetting.Cells were then incubated on ice for 30 minutes, transferred to a 40˚C water bath for 8 minutes, and immediately placed back on ice for 10 minutes.Following, 500 μL of LBmc, 38μM FeCl 3 was added to the reaction tube and cells were recovered at 30˚C with shaking incubation (225rpm) for 90 minutes.Following recovery, 250 μL of the transformation mixture were spread on LBmc plates containing 38 μM FeCl 3 , 100 μg mL -1 streptomycin, and an appropriate concentration of antibiotic selection.Plates were incubated at 30˚C for 3 days to allow for colony formation.

Transfer of DNA from E. coli to S. meliloti via conjugation
Preparation of S. meliloti (RmP4122) cells.An overnight culture (OD 600 = 2.0) in LBmc, 38μM FeCl 3, streptomycin 100 μg mL -1 was diluted 20x to make 20 mL culture and grown 6 hours shaking at 30˚C in LBmc supplemented with streptomycin 100 μg mL -1 and Fe to OD 600 of 0.9.The culture was diluted 2000X and grown with shaking at 30˚C in 50 mL LBmc supplemented with streptomycin 100 μg mL -1 and Fe to OD 600 of 0.6.The culture was centrifuged for 10 min at 6,000 x g at 4˚C and resuspended in 300 μL of LBmc media.
Conjugation from E. coli to S. meliloti.First, 50 μL of E. coli cells and 50 μL of S. meliloti cells were mixed directly on LBmc plates supplemented with 38μM FeCl 3 and diaminopimelic acid 60 μg mL -1 and incubated for 180 minutes at 30˚C.Then, 1 mL of LBmc media was added to plates, cells were scraped, and 100 μL (from a dilution series of 10 −3 to 10 −9 ) was plated on LBmc plates supplemented with Fe, streptomycin 100 μg mL -1 , and spectinomycin 200 μg mL - 1 (Note: plates should be at least 35 mL thick).Plates were incubated at 30˚C for 3 days before colonies were counted.
Preparation of E. coli (Epi300) cells.Saturated overnight culture of E. coli was diluted 20X into 50 mL LB and grown with shaking at 37˚C to OD 600 of 0.6.The culture was centrifuged for 10 min at 6,000 x g at 4˚C and resuspended in 300 μL of LBmc media.
Conjugation from S. meliloti to E. coli.First, 50 μL of E. coli cells and 50 μL of S. meliloti cells were mixed directly on LBmc plates supplemented with Fe and incubated for 180 minutes at 30˚C.Then, 1 mL of LBmc media was added to plates, cells were scraped, and 100 μL (from a dilution series of 10 −3 to 10 −9 ) was plated on LB plates supplemented with chloramphenicol 15 μg mL -1 .Plates were incubated at 37˚C for 16 hours before colonies are counted.
Note: For simplicity, acetosyringone and arabinose steps can be removed from the final protocol without any substantial decrease in conjugation efficiency.
Preparation of S. cerevisiae (VL6-48) cells.S. cerevisiae was grown with shaking at 30˚C in 100 mL of 2X YPAD media to OD 600 of 2.5.The culture was centrifuged for 10 min at 5,000 x g and resuspended in 1 ml of H 2 0.
Conjugation from S. meliloti to S. cerevisiae.First, 200 μL of S. cerevisiae cells and 250 μL of S. meliloti was directly mixed on a 2% -HIS plate supplemented with 10% LBmc, 38μM FeCl 3 and acetosyringone 100 μg mL -1 (Note: plates were dried out in the hood for 1 hour prior to conjugation).Then plates were incubated for 180 minutes at 30˚C.Then, 2 mL of sddH 2 0 was added to plates and cells were scraped.Next, 100 μL of the scraped cells was plated on 2% -HIS plates supplemented with ampicillin 100 μg mL -1 .Plates were incubated at 30˚C where colonies start to appear after 2-3 and colonies are counted after 5 days.
Note: For simplicity, accetosyringone steps can be removed from the final protocol without any substantial decrease in conjugation efficiency.
Transfer of DNA from S. meliloti to P. tricornutum via conjugation Preparation of P. tricornutum cells.First, 250 μL of liquid grown culture was adjusted to 1.0 x 10 8 cells mL -1 using counts from a hemocytometer, was plated on ½L1 1% agar plates and grown for 4 days.Then, 1 mL of L1 media was added to the plate and cells were scraped, counted using a hemocytometer, and adjusted to a concentration of 1 x 10 9 cells mL -1 .
Conjugation from S. meliloti to P. tricornutum.First, 200 μL of P. tricornutum cells and 200 μL of S. meliloti cells were mixed directly on ½L1 10% LBmc 1% agar plates (Note: plates are dried in the biosafety cabinet for one hour before conjugation) and incubated for 180 minutes at 30˚C in the dark, then moved to 18˚C in the light and grown for 2 days.After two days, 2 mL of L1 media was added to plates, cells were scraped, and 100 μL (5%) was plated on ¼L1 1% agar plates supplemented with nourseothricin 100 μg mL -1 , and ampicillin 100 μg mL -1 (Note: plates should be at least 35 mL thick).Plates were incubated at 18˚C in the light/dark cycle and colonies start to appear after 7 days and are allowed to develop to 14 days before colonies are counted.

Transfer of DNA from S. meliloti to P. tricornutum via conjugation in a 96-well plate
Preparation of P. tricornutum cells.First, 200 μL of liquid grown culture was diluted using counts from a hemocytometer, and grown in ½L1 media for 4 days.Cell counts from a hemocytometer were used and culture was pelleted at 4000 x g 10 min 4˚C, and adjusted to a concentration of 1 x 10 9 cells mL -1 .
The culture was diluted 25X and grown for 12 hours with shaking at 30˚C in 50 mL LBmc supplemented with spectinomycin 200 μg mL -1 , gentamicin 40 μg mL -1 to OD 600 of 0.6.The culture was centrifuged for 10 min at 5,000 x g at 4˚C and resuspended in 500 μL of LBmc media.
Conjugation from S. meliloti to P. tricornutum.First, 5 μL of P. tricornutum cells and 5 μL of S. meliloti cells were mixed together in a 96-well plate.The mixture (10 μL) was transferred to a 96-well plate containing 200 μL of ½L1 10% LBmc 1% agar (note: plates are dried in the biosafety cabinet for one hour before conjugation).This conjugation plate was incubated for 180 minutes at 30˚C in the dark, then moved to 18˚C in the light and grown for 2 days.After two days, 100 μL of L1 media was added to wells and cells were scraped (X2), and 10 μL (5%) was plated on ¼L1 1% agar supplemented with nourseothricin 100 μg mL -1 , and ampicillin 100 μg mL -1 in a 96-well plate.Plates were incubated at 25˚C in the light/dark cycle for 24 hours and then 18˚C in the light/dark cycle for an additional 24 hours.Colonies start to appear after 7 days and are allowed to develop up to 14 days before colonies are counted.

Plasmid DNA isolation
Plasmid DNA (<60 kb) was isolated from E. coli using the BioBasic EZ-10 miniprep kit.Plasmid DNA was isolated from all other species using a modified alkaline lysis protocol.Plasmid DNA was isolated from all other species and E. coli containing plasmids >60 kb using the modified alkaline lysis protocol described below.Steps 1-3 are variable depending on the species, while steps 4-10 are common for all species.Steps 1-3 for E. coli and S. meliloti.(1) Five mL cultures were grown to saturation overnight.(2) Cells were pelleted at 5000 x g for 10 min at 4˚C, and the supernatant was discarded.(3) Cells were resuspended in 250 uL of resuspension buffer (which contained 240 ml P1 (Qiagen), 5 ml of 1.4 M b-Mercaptoethanol and 5 ml Zymolyase solution (Zymolyase solution: 200 mg Zymolyase 20 T (USB), 9 ml H2O, 1 ml 1 M Tris pH7.5, 10 ml 50% glycerol, stored at 20˚C).Steps 1-3 for S. cerevisiae.(1) Five mL of culture was grown to saturation.(2) Cells were pelleted at 5000 x g for 10 min 10 min at 4˚C, and the supernatant was discarded.(3) Cells were resuspended in 250 mL resuspension buffer (as described above) and incubated at 37˚C for 60 min.Steps 1-3 for P. tricornutum.(1) Five mL cultures were harvested during exponential growth phase.(2) Cells were pelleted at 4,000g for 10 min at 4˚C, and the supernatant was discarded.(3) Cells were resuspended in 250 mL resuspension buffer, which contained 235 ml P1 (Qiagen), 5 ml hemicellulase 100 mg ml 1, 5 ml of lysozyme 25 mg ml 1, and 5 ml Zymolyase solution (Zymolyase solution: 200 mg Zymolyase 20T (USB), 9 ml H2O, 1 ml 1 M Tris pH7.5, 10 ml 50% glycerol, stored at 20˚C) and then cells were incubated at 37˚C for 30 min.Steps 4-10 common for all species.(4) 250 uL of lysis buffer P2 (Qiagen) was added and samples were inverted 5-10 times to mix.(5) 250 ml of neutralization buffer P3 was added and samples were inverted 5-10 times to mix.(6) Then samples were spun down at 16,000g, 10 min at 4˚C (7) Supernatant was transferred to a clean tube and 750 ul ice-cold isopropanol was added and the samples were mixed by inversion and spun down at 16,000g, 10 min at 4˚C (8) Next the supernatant was removed and 750 ul ice-cold 70% EtOH was added and samples were mixed by inversion and spun down at 16,000g, 5 min.(9) Next the supernatant was discarded, pellets were briefly dried and resuspended in 50 uL of TE buffer.(10) After that the samples were kept at 37˚C for 30-60 min to dissolve.

Fig 2 .
Fig 2.Optimized conjugation protocols from S. meliloti to various recipient organisms.Antibiotic concentrations are given in μg mL -1 The S. meliloti RmP4098 ΔpSymA ΔhsdR strain used is resistant to streptomycin (100 μg mL -1 ) and requires Fe (38 μM FeCl 3 ) supplementation for growth.The pAGE1.0 plasmid used confers resistance to spectinomycin (200 μg mL -1 ).Media supplementation may vary with chosen S. meliloti host and MHS vector.(a) Schematic of protocol for conjugation of pAGE1.0 from S. meliloti to E. coli.(b) Schematic of protocol for conjugation of pAGE1.0vector from S. meliloti to S. cerevisiae.(c) Schematic of protocol for conjugation of pAGE1.0vector from S. meliloti to P. tricornutum-standard protocol.Note that ¼ salt L1 plates were made with ¼ aquil salts concentration (half that of typical ½ L1 plates), keeping all other components the same as in ½ L1 plates.(d) Schematic of protocol for conjugation of pAGE1.0vector from S. meliloti to P. tricornutum-96-well plate protocol.(e) Examples of plates containing transconjugants resulting from conjugation from S. meliloti to E. coli, S. cerevisiae, and P. tricornutum (standard and in a 96-well plate).P. tricornutum transconjugants from the 96-well plate protocol are shown with 100 uL plated on a full plate, and 10 uL spot plated and serially diluted.

Fig 3 .
Fig 3. Conjugation efficiency of direct transfer of pAGE1.0 from S. meliloti donor to E. coli, S. cerevisiae, and P. tricornutum recipients.Conjugation efficiency for each donor-recipient pair.Post-conjugation non-selective plates and pAGE1.0selective plates were used to determine the conjugation efficiency (calculated as transconjugants/ recipient) between each donor and recipient pair.Efficiencies are represented as bar plots with three biological and three technical replicates, with error bars illustrating standard error of the mean.https://doi.org/10.1371/journal.pone.0206781.g003 Figure A. Verification of hsdR deletion in reduced S. meliloti strains by diagnostic PCR. Figure B. Diagnostic restriction digest of pAGE and pBGE vectors.
Figure C. Vector stability assay of pAGE2.0 in S. meliloti over 50 generations.Figure D. Workflow of optimized electroporation transformation protocol for S. meliloti.Figure E. Workflow of optimized PEG-mediated transformation protocol for S. meliloti.Figure F. PEG-mediated transformation of pAGE vectors into S. meliloti.Figure G. EcoRV-HF diagnostic digest of pAGE1.0vectors extracted from 20 E. coli colonies following conjugation from S. meliloti to E. coli. Figure H. EcoRV-HF diagnostic digest of pAGE1.0vectors extracted from 20 E. coli colonies following conjugation from S. meliloti to P. tricornutum.Figure I. EcoRV-HF diagnostic digest of pAGE1.0vectors extracted from 20 E. coli colonies following conjugation from S. meliloti to S. cerevisiae.(DOCX) S2 File.Supporting tables.

Table A .
Vector stability of pAGE2.0 in S. meliloti RmP4122 ΔpSymA ΔhsdR.Table B. Efficiency of DNA transfer methods to S. meliloti RmP4122 ΔpSymA ΔhsdR including PEG-mediated transformation, electroporation and conjugation of pAGE vectors.Table C. Efficiency of pAGE1.0conjugation from S. meliloti to recipient organisms and ratio of donor to recipient cells involved.Table D. Analysis of pAGE1.0vectors recovered from conjugations from S. meliloti to E. coli, S. cerevisiae, and P. tricornutum.Table E. List of oligonucleotides used in this study.Table F. List of strains used in this study.Table G.List of vectors used in this study.(DOCX)