Msmeg_2731, an Uncharacterized Nucleic Acid Binding Protein from Mycobacterium Smegmatis, Physically Interacts with Rps1

While the M. smegmatis genome has been sequenced, only a small portion of the genes have been characterized experimentally. Here, we purify and characterize MSMEG_2731, a conserved hypothetical alanine and arginine rich M. smegmatis protein. Using ultracentrifugation, we show that MSMEG_2731 is a monomer in vitro. MSMEG_2731 exists at a steady level throughout the M. smegmatis life-cycle. Combining results from pull-down techniques and LS-MS/MS, we show that MSMEG_2731 interacts with ribosomal protein S1. The existence of this interaction was confirmed by co-immunoprecipitation. We also show that MSMEG_2731 can bind ssDNA, dsDNA and RNA in vitro. Based on the interactions of MSMEG_2731 with RPS1 and RNA, we propose that MSMEG_2731 is involved in the transcription-translation process in vivo. Copyright: ß 2012 Yang et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. Ministry of Health's Key Projects for Infectious Diseases (2008ZX10003-005) are also gratefully acknowledged. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.


Introduction
Mycobacterium tuberculosis is the pathogen responsible for human tuberculosis and infects 1-2$billion people worldwide, causing up to 2$million deaths annually. There have been significant advances in understanding the biology of this pathogen since the sequencing of the M. tuberculosis H37Rv genome was completed in 1998 [1]. However, less than 40% of the genes of this pathogen have a known or a putative function. [1][2][3]. More extensive functional research on its genes, especially mycobacterial specific genes, is required to reveal the mechanisms underlying its growth, pathogenicity and dormancy.
Although the suitability of M. smegmatis as a model organism for studying the virulence of M. tuberculosis has been questioned, this fast-growing and non-pathogenic species is still of great importance for studying mycobacterial biology [4,5]. Many genes which were initially described as being M. tuberculosis-specific share closely related homologues in M. smegmatis. The genome of M. smegmatis is 6,988,209$nucleotides long, approximately 1.7$times larger than that of M. tuberculosis. Nearly a third of the 6716 proteins encoded by the 6938 ORFs identified in the genome of M. smegmatis are hypothetical proteins, and only a small portion of the ''annotated'' genes have been characterized experimentally.
MSMEG_2731 is a conserved hypothetical alanine and arginine rich protein from M. smegmatis. MSMEG_2731 contains 454 amino acids and is composed of three tandem repeats of the DUF349 domain [6]. MSMEG_2731 belongs to protein cluster CLSK872100 which contains a total of 18 proteins and is conserved in mycobacteria. Rv2731, the M. tuberculosis homologue of MSMEG_2731 shares 73% sequence identity to MSMEG_2731. Rv2731 is present in cytosol, cell wall, and cell membrane fractions of M. tuberculosis H37Rv [7,8]. It was suggested that the expression of Rv2731, a conserved hypothetical gene of unknown function made it relevant to investigate whether it plays a role in mycobacterial specific functions [9].
To identify and functionally study this conserved MSMEG_2731, we cloned the MSMEG_2731 gene and expressed the protein in E. coli. After purifying MSMEG_2731 to homogeneity, we identified that MSMEG_2731 mainly exists as monomer in vitro. Then we tested the expression of MSMEG_2731 in vivo and measured its expression level by quantitative western blot. Protein-protein interactions play a critical role in nearly every aspect of cell structure and function. Identifying protein-protein interactions offers important clues for understanding the function of an unknown protein [10]. Here, using pull-down techniques and LS-MS/MS, we found that ribosomal protein S1 is one of the interaction partners of MSMEG_2731. In addition, we also showed that MSMEG_2731 is a nucleic acid-binding protein which can bind to single stranded DNA, double stranded DNA and RNA in vitro. These findings imply that MSMEG_2731 is likely to be a mycobacterial specific factor involved in transcription or translation in M. smegmatis.

Purification and characterization of recombinant MSMEG_2731
MSMEG_2731 was expressed in Escherichia coli and the Nterminal His-tagged recombinant protein was purified with nickel affinity chromatography ( Figure 1A). We used gel filtration ( Figure 1B), to purify the target protein to homogeneity. Ultracentrifugation was used to test for oligomerization of MSMEG_2731 in solution. Sedimentation velocity experiments revealed that MSMEG_2731 has a molecular mass of 46 kDa ( Figure 1C). As the theoretical molecular weight is 51.76 kDa, we concluded that MSMEG_2731 exists mostly as a monomer in solution. Except the main peak in sedimentation velocity profile that represented the monomers of MSMEG_2731, we also found a small peak that represented the dimers of MSMEG_2731. This result was verified by cross-linking assay ( Figure S1).

MSMEG_2731 tends to degrade at its N-terminus in vitro
We noted a band of a slightly lower molecular weight than MSMEG_2731 on SDS-PAGE gels. Using MALDI-TOF MS, we showed that this band isMSMEG_2731, but is probably a truncated form due to degradation of either or both of its terminals. We predicted the secondary structure of MSMEG_2731 using the PSIPRED protein structure prediction server (http://bioinf.cs.ucl.ac.uk/psipred/), and found that MSMEG_2731 is mostly composed of a helical motifs, except for 68 amino acids at the N-terminus which are disordered ( Figure S2). We then constructed an N-terminal 68-aa deletion mutant and compared its stability with that of full-length MSMEG_2731. Coomassie blue staining demonstrated that MSMEG_2731 degraded markedly over time, whereas mutant protein D68 remained intact. Additionally, Western blotting showed that the His tag on the N terminus of MSMEG_2731 disappeared quickly and cannot be detected in 6 days, while the His tag on N-terminus of D68 was stable over time ( Figure 1D). These results show that MSMEG_2731 tends to degrade at its Nterminus in vitro.

Cellular concentration of MSMEG_2731 in M. smegmatis
To confirm the existence and measure the expression level of MSMEG_2731 in vivo, we analyzed samples taken from various stages of the growth cycle of M. smegmatis using Western blotting. Two bands were detected by the antiserum in cultures which is in the early log phase, and three bands were detected after the log phase. These bands represented different fragments of MSMEG_2731 due to its degradation in vivo. Nevertheless, we compared their amounts and concluded that MSMEG_2731 exists at a relatively stable level throughout the growth cycle (Figure 2A, B). We then estimated the cellular concentration of MSMEG_2731 using quantitative Western blotting ( Figure 2C). The amount of native MSMEG_2731 was estimated from densitometric comparisons against recombinant MSMEG_2731 of known amounts. The number of cells was estimated using the drop plate method. Results from a semi-quantitative determination of cell counts show that the number of exponentially growing M. smegmatis cells at an OD 600 of 0.3 is 4.5610 7 . The cellular concentration of MSMEG_2731 was calculated using this data. Our results indicate that there are about 700 MSMEG_2731 molecules in each exponentially growing M. smegmatis cell.

Isolation of MSMEG_2731 binding proteins
To elucidate the function of MSMEG_2731, we searched for cellular interaction partners by performing a GST pull-down assay using GST-tagged MSMEG_2731. Highly purified GST-MSMEG_2731 was bound to glutathione-Sepharose 4B beads and then incubated with cleared M. smegmatis cell lysates. Incubations of GST with cell lysates or GST-tagged MSMEG_2731 with PBS were utilized as negative controls. Proteins retained with the beads after extensive washing were analyzed by Coomassie-stained SDS-PAGE gels ( Figure 3A). Several significant bands were excised and digested by trypsin. Subsequent identification of these samples by LC-MS/MS revealed that the interaction partners of MSMEG_2731 include the 30S ribosomal protein S1 (RPS1) ( Table 1), DNA or RNA helicase of superfamily protein II (XPB), DNA-directed RNA polymerase subunit beta' (RpoC) and translation initiation factor IF-2 (Table S1, Excel S1). This result suggests that MSMEG_2731 may associate with proteins involved in translation or transcription.

Verification of the interaction between MSMEG_2731 and RPS1
Co-immunoprecipitation was performed to verify the interaction between MSMEG_2731 and RPS1 in vivo. MSMEG_2731 and RPS1 immunoprecipitated together ( Figure 3B, 3C) with both MSMEG_2731 antiserum and RPS1 antiserum, but not with rabbit pre-immune serum or rat pre-immune serum, confirming that MSMEG_2731 is associated with RPS1 physiologically. To clarify whether the interaction is direct or mediated by other factors, GST-tagged MSMEG_2731 was immobilized on glutathione-Sepharose 4B beads and used to pull down purified RPS1. RPS1 binds strongly to GST-MSMEG_2731, but not to GST alone ( Figure 3D). This result verifies that MSMEG_2731 interacts directly with RPS1 in vitro.

MSMEG_2731 is a nucleic acid binding protein
The interaction partners of MSMEG_2731 identified by MS prompted us to question whether MSMEG_2731 can bind to nucleic acids. In order to test our hypothesis, surface plasmon resonance (SPR) assays were performed to study the interaction between MSMEG_2731 and nucleic acids. 59 biotinylated RNA, ssDNA and dsDNA were immobilized in three different channels on a SA chip at 20 resonance units (RU), 30 RU and 60 RU, respectively. A series of solutions containing different concentrations of MSMEG_2731 was passed through the three channels simultaneously. The response curves were recorded and analyzed using single-cycle kinetic methods on a BIAcore T100 machine. Interactions between MSMEG_2731 and RNA, ssDNA and dsDNA fit well with the simple 1:1 model ( Figure 4A, 4B, and 4C). Kinetic parameters shown in Table 2 show that the MSMEG_2731-RNA interaction has the lowest affinity and slowest association rate. Interaction between the MSMEG_2731-RPS1 complex and RNA To determine whether MSMEG_2731 affects the binding of RPS1 with RNA, we compared the binding profile of RPS1 and RNA with that of RPS1, RNA and MSMEG_2731 on a Biacore T100 machine. RPS1 bound to RNA quickly and dissociated from RNA completely after injection. MSMEG_2731 bound to RNA at a lower rate and did not dissociate from RNA as completely as RPS1 ( Figure 5A). Then we tested how MSMEG_2731-RPS1 complex interacted with RNA using the same chip. Just as RPS1 did, the complex bound to RNA rapidly and disassociated from RNA completely ( Figure 5B). We conclude that RNA mainly binds with RPS1 and that the interaction between RPS1 and MSMEG_2731 does not affect RPS1 binding to RNA. To determine the binding ratio of MSMEG_2731:RPS1, we tested the binding strength of different amounts of MSMEG_2731 with fixed amount of RPS1. Maximum binding strength was achieved when the molar ratio was 1:1, indicating that the interaction sites on RPS1 were totally occupied by MSMEG_2731. Thereafter, increasing the concentration of MSMEG_2731 to 2-fold of RPS1 cannot improve binding strength. Thus, it can be concluded that the binding ratio of MSMEG_2731:RPS1 is 1:1.

Discussion
MSMEG_2731 and its homologous proteins are highly conserved hypothetical proteins in mycobacteria ( Figure S3). In the present study, we demonstrated the presence of MSMEG_2731 in M. smegmatis for the first time and explored its function by elucidating its biochemical characteristics and interaction partners. MSMEG_2731 is expressed at a stable level throughout the growth cycle. The expression of this conserved hypothetical gene implies that it may play a role in mycobacterial specific functions.
Protein secondary structure prediction shows that MSMEG_2731 is mostly composed of alpha helices, except for 68 disordered N-terminal amino acids. Disordered protein regions are known to play a role in many vital biological processes, such as cell signaling, recognition, and nucleic acid and protein-protein interactions [11,12]. By analyzing its composition of amino acids, we found that this unstructured region contains 25% proline and 13.2% arginine, and that its theoretical pI is 11.70, significantly higher than that of the full-length protein (pI = 7.07). This implies that these 68 N-terminal amino acids may mediate the interaction of MSMEG_2731 with nucleic acids or other proteins. However, our results showed that MSMEG_2731 tends to degrade at it Nterminus in vitro. In addition, the detection of two or three bands in M. smegmatis cell lysates using anti-MSMEG_2731 serum indicates that the N-terminus of MSMEG_2731 may also be unstable in vivo. Nevertheless, loss of these 68 N-terminal amino acids does not affect the interaction of MSMEG_2731 with nucleotides or RPS1 (data not shown). Meanwhile, the N-terminus is the least conserved region in MSMEG_2731 and its homologous proteins in mycobacteria. Thus further study is required to clarify whether the most N-terminal amino acids are indispensable in MSMEG_2731 or not.
Ribosomal protein S1 (RPS1) is found in all Gram-negative and in several Gram-positive bacteria [13]. RPS1 is the largest ribosomal protein and is located at the junction of the head, platform, and main body of the 30S subunit [14]. Ribosome preparations often contain less than stoichiometric amounts of RPS1, implying that the association of RPS1 with the ribosome is weak and reversible compared with other ribosomal proteins [15]. It has been suggested that RPS1 is necessary for translation initiation and translation elongation [16,17]. RPS1 has also been reported to interact with RNA polymerase and to promote transcriptional cycling in vitro [18,19]. All these facts suggest that RPS1 functions at the interface of transcription and translation. E. coli RPS1 consists of six similar domains that play different roles. The first two domains are involved in binding to the ribosome, while the last four are involved in interactions with mRNA [20,21]. Four S1 domains have been identified in mycobacterial RPS1, corresponding to the first four domains of its counterpart in E. coli [22]. Yamada suggested that RPS1 from M. smegmatis is functionally similar to E. coli RPS1 with respect to stimulating poly(U)-directed polyphenylalanine synthesis [23]. Using surface plasmon resonance, we show that M. smegmatis RPS1 can bind to RNA quickly and dissociates from RNA completely, which may be relevant to its function in vivo.
RPS1 was identified by Shi et al along with three other proteins Rv2731, Rv2783c and Rv3169 in a search for the target of pyrazinoic acid (POA) in M. tuberculosis [24]. It is possible that Rv2731 was pulled-down in this case due to its association with RPS1. Based on our findings that MSMEG_2731 can bind to RNA and interacts with RPS1, we hypothesize that MSMEG_2731 may associate with RPS1 and regulate its function involved in transcription and translation. Although MSMEG_2731 does not affect the binding of RPS1 to RNA, it may compete with other proteins, such as ribosomal proteins and RNA polymerase, for the protein-protein interaction interface on RPS1.
In addition to RPS1, DNA or RNA helicase of superfamily protein II (XPB), DNA-directed RNA polymerase beta' subunit (RpoC) and translation initiation factor IF-2 were identified as direct or indirect interaction partners of MSMEG_2731 (Table  S1). XPB is the largest subunit of the eukaryotic TFIIH complex which plays an important role in both the initiation of transcription and nucleotide excision repair [25,26]. XPB is almost exclusively present in eukaryotes, however genes highly homologous to human XPB have been found in mycobacteria [27]. The interactions of MSMEG_2731 with XPB, RpoC or IF-2 observed here make our hypothesis that MSMEG_2731 may be involved in transcription and translation more convincing.
Although MSMEG_2731 is annotated as an ATPase involved in DNA repair, there are no common ATP binding domains on MSMEG_2731. Actually, we did not detect its ATPase activity in vitro (data not shown). Besides, we construct MSMEG_2731 knocked-out mutants ( Figure S4), and find that the spontaneous mutation rate of the MSMEG_2731 knocked-out mutant is almost equal to that of the wild type (data not shown). Therefore, MSMEG_2731 appears to not be a DNA repair protein. Our results that MSMEG_2731 binds to RNA and interacts with RPS1 physically and physiologically suggests it play a role in transcription or translation process. However, more extensive investigation into the function of MSMEG_2731 is required to clarify whether this conserved hypothetical protein carry out its function in mycobacterial specific regulation of transcription or translation.

Plasmid construction
All primers sequences used are listed in Table S2. Genomic DNA from M. smegmatis was isolated using an E.Z.N.A.H Bacterial DNA Kit from Omega Bio-Tek Inc. Genes encoding RPS1, MSMEG_2731 and its truncated forms were amplified by PCR using genomic DNA from M. smegmatis as the template. DNA fragments were digested by restriction enzymes and ligated into pET28a or pGEX-6P-1 vectors. The ligated plasmid constructs were introduced into E. coli strain BL21 (DE3), and the sequences of the cloned DNA fragments were confirmed by DNA sequencing.

Antibody production
Purified recombinant MSMEG_2731 was used to immunize rabbits to obtain MSMEG_2731 antiserum. RPS1 antiserum was obtained by immunizing rats with purified recombinant RPS1.

Protein expression and purification
All proteins were expressed in E. coli BL21 (DE3) cells in Luria-Bertani (LB) medium. Cells were cultured at 37uC, (shaken at 220 rpm) to an OD 600 ,0.4 and induced with isopropyl thio b-Dgalactoside (final concentration 0.4 mM) at 16uC overnight. Cells were harvested by centrifugation at 5000 rpm for 30 min and then lysed by sonication. Cell fragments were separated by centrifugation at 16,000 rpm for 30 min at 4uC. His-tagged proteins were Table 1. Peptides of ribosomal protein S1 identified by mass spectrometry.
purified using a Ni 2+ -NTA column (Amersham) and gel filtration, while GST-tagged proteins were purified using glutathione-Sepharose 4B beads (Amersham). The purity of proteins was determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). After the concentration of each protein was measured by UV absorption at A280, proteins were divided into aliquots, frozen in liquid nitrogen and stored at 280uC.

Quantitative Western blotting
Quantitative Western blotting was performed according to the method of Mukherjee et al., with some modifications [28]. To detect the expression level of MSMEG_2731, 1 ml of M. smegmatis cells was harvested when the OD 600 reached 0.3. Cell pellets were resuspended in 50 ml Laemmli sample buffer and then boiled at 90uC for 30 min. Samples were electrophoresed by 12% SDS-PAGE and transferred to a nitrocellulose membrane. The polyacrylamide gel was then stained with Coomassie blue to ensure complete transfer of proteins. The nitrocellulose membrane was blocked with 5% nonfat milk powder dissolved in 16 PBST for 1 h at room temperature and the membrane was then incubated overnight at 4uC with 1:500 dilution of MSMEG_2731 antiserum. After washing the membrane three times with 16 PBST, it was incubated with goat anti-Rabbit immunoglobulin G horseradish peroxidase-conjugated secondary antibody at room temperature for 1 h. The membrane was then washed three times with 16 PBST and incubated with chemiluminescent substrates (SuperSignalH West Pico, Bio-Rad). After exposing the blot to Fuji film for 30 seconds, the film was scanned and then analyzed by Quantity OneH software. The concentration of MSMEG_2731 was calculated as a function of the integrated density of the bands. The amount of MSMEG_2731 in the M. smegmatis sample was calculated against a recombinant MSMEG_2731 standard.

Mass spectrometry
The purified recombinant GST-MSMEG_2731 was incubated with M. smegmatis cell lysates for 4 h in lysis buffer B (50 mM Tris-HCl (pH 7.4), 150 mM NaCl, 1 mM EDTA, 0.1% Triton X-100). A negative control using GST alone as a bait protein was run at the same time. A 50-ml slurry of glutathione-Sepharose 4B beads was added and incubated with the system for another 1 h. After centrifugation at 7006 g, the supernatant was discarded, and the pellets were washed five times with 800 ml buffer B at 4uC. After washing, the pellets were resuspended in 20 ml of Laemmli sample buffer followed by boiling at 100uC for 10 min. The sample was centrifuged at 12 000 g for 5 min and then electrophoresed on a 12% SDS-PAGE gel. The major bands present in the sample but not in the control were excised and in-gel digested with trypsin. The

Co-IP assay
Exponentially-growing cells of M. smegmatis were harvested, resuspended and lysed in lysis buffer B (50 mM Tris-HCl (pH 7.4), 150 mM NaCl, 1 mM EDTA, 0.1% Triton X-100). Cell extracts were centrifuged at 30,700 g for 30 min at 4uC. Supernatants were transferred and incubated with 5 ml of MSMEG_2731 antiserum for 4 h at 4uC. 20 ml of protein G agarose slurry was then added to the solution and incubated for 1 h. Beads were collected by centrifugation at 700 g for 5 min, then washed five times with lysis buffer at 4uC, and resuspended in SDS-PAGE sample loading buffer. The sample was electrophoresed on a 12% SDS-PAGE gel and then analyzed by Western blotting.

SPR experiments
SPR experiments were carried out on a BIAcore T100 machine (GE Healthcare) at 25uC. To measure and compare the strength of the interactions of MSMEG_2731 with double-stranded DNA, single-stranded DNA and RNA, 59 biotinylated dsDNA (25 bp), ssDNA (25 nt) and RNA (25 nt) were immobilized in different channels on a streptavidin (SA)-coated sensor chip ( Table 3). The sensor chip was equilibrated with running buffer at a flow rate of 30 ml/min until the baseline was stable. The running buffer contained 25 mM Tris-HCl (pH 7.4), 150 mM NaCl and 0.005% (v/v) Tween 20. Protein samples were injected at different concentrations using a flow rate of 30 ml/min for 2 min. Kinetic analysis was performed using a single-cycle kinetics approach in all the SPR experiments. Figure S1 Cross-linking assay of MSMEG_2731 using BS3. MSMEG_2731 with increasing concentrations (lanes 2-9; 0.025, 0.05, 0.1, 0.25, 0.5, 1, 2.5, 5, 10 mM, respectively) of BS3 were incubated in non-amine-containing buffer for 30 min at room temperature. The reaction was quenched by adding 1 M Tris-HCl to a final concentration of 50 mM Tris. The samples were resolved by 12% SDS-PAGE. Coomassie blue staining showed that BS3 induced several bands with larger molecular weight, which represented the dimers and other forms of oligomers of MSMEG_2731. But much excess of BS3 abrogated the crosslinked complex. This effect may be due to the reason that oversaturated BS3 left no available primary amines for two adjacent protein to bind each other. smegmatis genome using the mycobacterial recombineering system. Briefly, the knockout cassette was generated by overlap extension PCR, in which the two 500 bp sequences fragments flanking each of the ends of MSMEG_2731 were fused with the hygR fragment. Then the knockout cassette was transformed into the wild type MC2 155 strains harboring the recombineering plasmid pJV53. The positive recombinants were identified by PCR analysis. (B) PCR results with primers flanking upstream homology. The 39 primer is located in hygR sequence. ak1-9 are different strains selected from the plate. A wild-type strain was used as a control. (C) PCR results using hygR primers. A wild-type strain and hygR gene fragment are negative and positive controls respectively. (D) PCR results using primers flanking the downstream homology. The 59 primer is located in the hygR sequence. A wild-type strain was used as negative control. (TIF) Excel S1 Mass Spectrometry results analysis. All MS/ MS data were searched against a Mycobacterium smegmatis MC-155 protein database (2009-6-23, 16221 entries) downloaded from the NCBI database using the SEQUEST (v.28) program (Thermo, USA). All searches were performed using a precursor mass tolerance of 3 Da calculated using average isotopic masses. Variable modification was set for methionine with the addition of 15.999 Da to represent methionine oxidation; static modification was set for cysteine with the addition of 57.052 Da to represent cysteine carboxyamidation. A fragment ion mass tolerance of 1Da was used. Enzyme cleavage specificity was set to trypsin and no more than two missed cleavages were allowed. The SEQUEST outputs were then analyzed using the commercial software Thermo Electron BioWorks (Rev.3.3.1 sp1). The filter settings for peptides were as follows -distinct peptide, Xcorr $1.9 (z = 1), 2.7 (z = 2), 3.75 (z = 3), Sp$500, Rsp#5, at least two distinct peptides per protein.