Second harmonic generation of violet light in femtosecond-laser-inscribed BiB 3 O 6 cladding waveguides

Depressed cladding waveguide structures have been fabricated in BiB3O6 nonlinear crystal by using femtosecond (fs) laser inscription. The nonlinear properties of original BiB3O6 crystal have been well preserved within the waveguide volume. Under 800 nm continuous wave laser pumping, the guided-wave second harmonic generation of violet light at 400 nm has been realized, with a maximum power of ~1.05 mW and a conversion efficiency of ~0.98%/W. ©2013 Optical Society of America OCIS codes: (230.7370) Waveguides; (190.4390) Nonlinear optics, integrated optics; (140.3390) Laser materials processing. References and links 1. E. J. Murphy, Integrated Optical Circuits and Components: Design and Applications (Marcel Dekker, 1999). 2. C. Grivas, “Optically pumped planar waveguide lasers, Part I: Fundamentals and fabrication techniques,” Prog. Quantum Electron. 35(6), 159–239 (2011). 3. F. Chen, “Micro-and submicrometric waveguiding structures in optical crystals produced by ion beams for photonic applications,” Laser Photon. Rev. 6(5), 622–640 (2012). 4. D. N. Nikogosyan, Nonlinear Optical Crystals: A Complete Survey (Springer, 2005). 5. M. Ghotbi and M. Ebrahim-Zadeh, “Optical second harmonic generation properties of BiB3O6.,” Opt. Express 12(24), 6002–6019 (2004). 6. V. Petrov, M. Ghotbi, O. Kokabee, A. Esteban-Martin, F. Noack, A. Gaydardzhiev, I. Nikolov, P. Tzankov, I. Buchvarov, K. Miyata, A. Majchrowski, I. V. Kityk, F. Rotermund, E. Michalski, and M. Ebrahim-Zadeh, “Femtosecond nonlinear frequency conversion based on BiB3O6,” Laser Photonics Rev. 4(1), 53–98 (2010). 7. F. Chen, H. Hu, K. M. Wang, B. Teng, J. Y. Wang, Q. M. Lu, and D. Y. Shen, “Formation of a planar optical waveguide by mega-electron-volt He and P ions implanted in a BiB3O6 crystal,” Opt. Lett. 26(24), 1993–1995 (2001). 8. L. Wang, F. Chen, X. L. Wang, K. M. Wang, Q. M. Lu, and H. J. Ma, “Formation of planar waveguide in BiB3O6 crystal by MeV carbon implantation,” Nucl. Instr. and Meth. B 266(6), 899–903 (2008). 9. S. J. Beecher, R. R. Thomson, D. T. Reid, N. D. Psaila, M. Ebrahim-Zadeh, and A. K. Kar, “Strain field manipulation in ultrafast laser inscribed BiB3O6 optical waveguides for nonlinear applications,” Opt. Lett. 36(23), 4548–4550 (2011). 10. Y. C. Jia, J. R. Vázquez de Aldana, C. Romero, Y. Y. Ren, Q. M. Lu, and F. Chen, “Femtosecond-laserinscribed BiB3O6 nonlinear cladding waveguide for second-harmonic generation,” Appl. Phys. Express 5(7), 072701 (2012). 11. R. R. Gattass and E. Mazur, “Femtosecond laser micromachining in transparent materials,” Nat. Photonics 2(4), 219–225 (2008). 12. R. Osellame, G. Cerullo, and R. Ramponi, Femtosecond Laser Micromachining: Photonic and Microfluidic Devices in Transparent Materials (Springer, 2012). 13. F. Chen and J. R. Vázquez de Aldana, “Optical waveguides in crystalline dielectric materials produced by femtosecond laser micromachining,” Laser Photonics Rev. DOI: 10.1002/lpor.201300025 (2013). 14. K. Sugioka and Y. Cheng, “Femtosecond laser processing for optofluidic fabrication,” Lab Chip 12(19), 3576– 3589 (2012). #193379 $15.00 USD Received 9 Jul 2013; revised 1 Aug 2013; accepted 4 Aug 2013; published 9 Aug 2013 (C) 2013 OSA 1 September 2013 | Vol. 3, No. 9 | DOI:10.1364/OME.3.001279 | OPTICAL MATERIALS EXPRESS 1279 15. K. M. Davis, K. Miura, N. Sugimoto, and K. Hirao, “Writing waveguides in glass with a femtosecond laser,” Opt. Lett. 21(21), 1729–1731 (1996). 16. S. Juodkazis, V. Mizeikis, and H. Misawa, “Three-dimensional microfabrication of materials by femtosecond laser for photonics applications,” J. Appl. Phys. 106(5), 051101 (2009). 17. M. Ams, G. D. Marshall, P. Dekker, J. A. Piper, and M. J. Withford, “Ultrafast laser written active devices,” Laser Photonics Rev. 3(6), 535–544 (2009). 18. J. Choi, M. Bellec, A. Royon, K. Bourhis, G. Papon, T. Cardinal, L. Canioni, and M. Richardson, “Threedimensional direct femtosecond laser writing of second-order nonlinearities in glass,” Opt. Lett. 37(6), 1029– 1031 (2012). 19. J. T. Lin, S. J. Yu, Y. G. Ma, W. Fang, F. He, L. L. Qiao, L. M. Tong, Y. Cheng, and Z. Z. Xu, “On-chip threedimensional high-Q microcavities fabricated by femtosecond laser direct writing,” Opt. Express 20(9), 10212– 10217 (2012). 20. J. R. Grenier, L. A. Fernandes, and P. R. Herman, “Femtosecond laser writing of optical edge filters in fused silica optical waveguides,” Opt. Express 21(4), 4493–4502 (2013). 21. J. Burghoff, S. Nolte, and A. Tünnermann, “Origins of waveguiding in femtosecond laser-structured LiNbO3,” Appl. Phys., A Mater. Sci. Process. 89(1), 127–132 (2007). 22. L. B. Fletcher, J. J. Witcher, N. Troy, S. T. Reis, R. K. Brow, and D. M. Krol, “Direct femtosecond laser waveguide writing inside zinc phosphate glass,” Opt. Express 19(9), 7929–7936 (2011). 23. R. Mary, S. J. Beecher, G. Brown, R. R. Thomson, D. Jaque, S. Ohara, and A. K. Kar, “Compact, highly efficient ytterbium doped bismuthate glass waveguide laser,” Opt. Lett. 37(10), 1691–1693 (2012). 24. G. A. Torchia, A. Rodenas, A. Benayas, E. Cantelar, L. Roso, and D. Jaque, “Highly efficient laser action in femtosecond-written Nd:yttrium aluminum garn et ceramic waveguides,” Appl. Phys. Lett. 92(11), 111103 (2008). 25. J. Siebenmorgen, K. Petermann, G. Huber, K. Rademaker, S. Nolte, and A. Tunnermann, “Femtosecond laser written stress-induced Nd:Y3Al5O12 (Nd:YAG) channel waveguide laser,” Appl. Phys. B 97(2), 251–255 (2009). 26. A. M. Streltsov, “Femtosecond-laser writing of tracks with depressed refractive index in crystals,” Proc. SPIE 4941, 51–57 (2003). 27. A. Okhrimchuk, V. Mezentsev, A. Shestakov, and I. Bennion, “Low loss depressed cladding waveguide inscribed in YAG:Nd single crystal by femtosecond laser pulses,” Opt. Express 20(4), 3832–3843 (2012). 28. D. G. Lancaster, S. Gross, H. Ebendorff-Heidepriem, K. Kuan, T. M. Monro, M. Ams, A. Fuerbach, and M. J. Withford, “Fifty percent internal slope efficiency femtosecond direct-written Tm3+:ZBLAN waveguide laser,” Opt. Lett. 36(9), 1587–1589 (2011). 29. N. N. Dong, F. Chen, and J. R. Vázquez de Aldana, “Efficient second harmonic generation by birefringent phase matching in femtosecond laser inscribed KTP cladding waveguides,” Phys. Status Solidi: rrl 6(7), 306– 308 (2012). 30. M. Thorhauge, J. L. Mortensen, P. Tidemand-Lichtenberg, and P. Buchhave, “Tunable intra-cavity SHG of CW Ti:Sapphire lasers around 785 nm and 810 nm in BiBO-crystals,” Opt. Express 14(6), 2283–2288 (2006).


Introduction
In integrated micro-photonic devices, nonlinear optical guiding structures are attracting a great attention owing to the combination of the original nonlinear properties of substrates and the compact confinement of light propagation within considerably compressed volumes [1][2][3]. As one of the most intriguing nonlinear materials for effective frequency conversion, the monoclinic bismuth borate (BiB 3 O 6 or BIBO) crystal is of special relevance owing to its remarkable large nonlinear optical coefficient (d eff = 3.2 pm/V) as well as high damage threshold (~5 GW/cm 2 ) [4]. The second harmonic generation (SHG) from visible till UV spectral ranges can be achieved in BiB 3 O 6 via birefringent phase matching (BPM) mechanism [5,6]. Taking the advantages of the nonlinear features of BiB 3 O 6 crystal and compact geometry of waveguides, promising micro-photonic components may be fabricated for efficient frequency conversion. As of yet, waveguide structures in BiB 3 O 6 crystals fabricated by ion implantation and fs laser inscription have been reported [7][8][9][10], and efficient SHG of green light has been realized [10]. Nevertheless, there has been no report on SHG of violet light in BiB 3 O 6 waveguides.
Tightly focused fs laser pulses could directly modify the optical properties of the transparent materials at both micro and sub-micro scales, based on the structural modifications induced at the focal spot and in its surroundings [11][12][13][14]. Benefiting from this feature, fs laser inscription technique has become a powerful and unique method for the construction of three-dimensional (3D) guiding structures inside versatile transparent materials , since the pioneering work by Davis et al. in 1996 [15]. Basically, the fs-laser-written waveguides could be classified into directly written structures (Type I waveguides with single line writing) [21][22][23], stress-induced waveguides (Type II waveguides with double-line filaments) [9,21,24,25], and cladding waveguides (structures usually with large area cross sections) [10,[26][27][28][29]. In this last fabrication strategy, the waveguide core is located in the section surrounded by multiple low-index damaged tracks induced by the fs-laser inscription. Such a configuration was firstly proposed by Streltsov in 2003 [26]. Compared to the first two types of guiding geometries, the cladding waveguides could be manufactured with arbitrarily designed cross sections without requiring complex sample manipulation (such as rotation). Particularly, the scales of the cladding waveguide cross section could be designed to match the diameters of the commercially available multimode fibers (with diameters of 100-400 μm), which in principle offers an opportunity to construct efficient fiber-waveguide integrated photonic chips with low costs. In addition, the cladding structures seem to be much efficient and well-matched for nonlinear crystals because the large-dimension waveguide volumes may offer good guidance for any polarization direction in the cross-sectional plane, which guarantees birefringent frequency doubling, under either Type I or Type II PM configuration, efficiently realized. Recently, we have reported the fabrication of nonlinear cladding waveguides in KTiOPO 4 and BiB 3 O 6 crystals and the realization of SHG under birefringent PM configuration for 1064→532 nm [10,29]. In this work, we report on the fabrication of the BiB 3 O 6 cladding waveguide and its SHG features for the 800→400 nm SHG of violet light. The optically polished BiB 3 O 6 crystal sample used in this work was cut into wafers with dimensions of 7(z) × 5(y) × 2(x) mm 3 along the phase matching direction for efficient 800 to 400 nm Type I SHG (i.e. e ω + e ω →o 2ω ) in the y-z plane (θ = 151.2°, φ = 90°). The depressed cladding waveguide structures were fabricated by utilizing the laser facilities at the Universidad de Salamanca. An amplified Ti:Sapphire laser system (Spitfire, Spectra Physics, USA), generating linearly-polarized 120 fs pulses at a central wavelength of 800 nm (with 1 kHz repetition rate and 1 mJ maximum pulse energy), was employed as laser source. We used a calibrated neutral density filter, a half-wave plate and a linear polarizer to finely control the value of the pulse energy used to irradiate the sample. A 40 × microscope objective (N.A. = 0.4) was utilized to focus the laser beam at a certain depth beneath the largest sample surface (dimensions of 7 × 5 mm 2 ), and several tests at different pulse energies and scanning velocities were performed. Optical microscopy (in transmission mode) was used to evaluate the damage tracks produced in the sample and the final irradiation parameters were fixed to 0.21 μJ of pulse energy. During the irradiation process the sample was placed in a computer controlled motorized 3-axes stage, moving at a constant speed of 700 μm/s in the direction perpendicular to the laser beam polarization. The writing direction was carefully aligned with the 5-mm long edge of the sample. Consequently, a damage track along the sample was produced. For the chosen polarization (y-direction), no evidence of multiple focusing due to birefringence was found in the crystal. The optimum values of velocity and pulse energy were chosen as a compromise between producing a large enough damage in the laser tracks (large index contrast) and minimizing the formation of cracks in the sample. Many parallel scans (with ~4 μm lateral separation between adjacent damage tracks) were performed at different depths of the sample (from bottom to top in order to avoid the shielding of the incident pulses by the previously written damage tracks) to inscribe the cladding waveguide structure with a diameter of 150 μm. The microscope images of cross section of the resulting structure in the BiB 3 O 6 can be seen in Fig. 1(a). The insets depict the top view of the cladding waveguide and the magnification of a section of the waveguide contour (i.e. the damage tracks).

Experiments in details
To experimentally characterize the modal profiles of the cladding waveguide, we arranged an end-face coupling experiment by using a He-Ne laser at wavelength of 632.8 nm.
The resulting distributions are shown in Fig. 1(b). One can find that the cladding waveguide structure support multimode guidance in any transverse direction (i.e. for both TE and TM polarizations), just as expected. We believe the difference between TE and TM guiding modes is mostly due to the birefringence of the BiB 3 O 6 substrate. As for the multimode distributions, which can be well understood in terms of the large size of the structures compared to the test wavelength (632.8 nm), just like shown in previous works [10]. In addition, we also performed the waveguide loss measurement at 632.8 nm, by considering the transmittance and reflectivity of the optical elements used in the experiment setup as well as the Fresnel reñection loss at the end facets (in our case, the value is about 0.4 dB in the interface of the waveguide end face and the air) into account. The insertion loss of the cladding was estimated to be 1.3 ± 0.3 dB/cm. A difference of 0.6 dB here was found between the TE and TM polarizations (the TE polarized light shows higher insertion losses than TM modes).
In order to investigate the preservation of original nonlinear response at the fabricated waveguide volume after fs laser inscription procedure, we performed the μ-SH measurement by employing a home-made confocal fluorescence microscope at the Fluorescence Imaging Group (Universidad Autónoma de Madrid, Spain). A single-mode fiber coupled mode-locked Ti:Sapphire laser (Millenia, Spectra Physics) providing 100 fs, 800 nm wavelength pulses at a repetition rate of 80 MHz. The 800 nm laser beam at the exit of the single mode fiber was collimated and focused into the sample by a 100 × microscope objective with a NA of 0.9. The subsequent backscattered second harmonic radiation at 400 nm was collected with the same objective and, after passing through a set of filters, lenses and pinholes, it was spectrally analyzed by a high resolution spectrometer. The sample was mounted on an x-y motorized stage with the spatial resolution of 100 nm so that the position of the 800 nm spot in respect to the waveguide structure was automatically controlled. In this work the methodology employed for SH imaging of the waveguides consisted on the scanning of the 800 nm laser spot over the waveguide cross section by performing 1 µm steps over a 400 µm 2 area. The 800 nm laser power was kept below 20 mW in order to avoid surface damage and the integration time used for the acquisition of the SH emission was set to 1 s per point.
The experiment for characterizing the nonlinear performance of the fs-fabricated waveguide was implemented with an end-face coupling system. For the SHG of BiB 3 O 6 cladding waveguide, a continuous-wave (cw) polarized laser beam at a wavelength of 800 nm generated from a tunable Ti:Sapphire laser (Coherent MBR 110), acting as the fundamental wave, was coupled into the waveguide by a convex lens with focal length of f = 25 mm. The polarization of the fundamental wave was controlled by a half-wave plate. The light emerging from the output end face of the waveguide was captured by employing a microscope objective lens with a NA of 0.4. And the generated SH light was separated from the residual fundamental laser beam by utilizing a dichroic mirror with transmission of ~70% at ~400 nm and reflectivity >99% at ~800 nm, and then detected by a spectrometer, a visible CCD camera as well as a powermeter.

Results and discussion
The relative refractive index reductions (Δn) at the waveguide counter (i.e. the locations of fs-laser damaged tracks) with respect to the bulk was estimated by using the equation 2 sin / (2 ) m n n Δ = Θ . In this equation, n is the substrate refractive index at 632.8 nm, and Θ m is the maximum beam divergence of the light entering or leaving the waveguide, which was measured by rotating a cubic K9 glass before the incident light coupling into the waveguide structure. According to the measured Θ m value, the effective refractive index changes possess the order of 10 −3 . This value is in good agreement with our previous work [10].   2 depicts 2D and 3D confocal μ-SH images of the waveguide cross-section as obtained for the end face of the cladding waveguide. As can be observed, the nonlinear properties of the BiB 3 O 6 crystal have not been modified in the waveguide volume during fslaser inscription, but enhanced markedly at the waveguide contour (about 8-10 times the emitted intensity of bulk material), where the BiB 3 O 6 network is simultaneously damaged, compressed and disordered by fs laser irradiation. The origin of this local SH back-scattered intensity enhancement could be explained in terms of a combination of two effects. On one hand, damage volumes increase the local density of scattering points so that the backscattering efficiency and the back scattered SH Intensity are both enhanced (i.e., the measured enhancement of the back-scattered signals and back-scattering efficiency in those areas is due to the larger-density defects, which act as scattering centers and reflecting back the SH radiation). The second effect is that damage volumes are very likely characterized by a high density of extended defects and micro-cracks. The original material in the surroundings of micro-cracks and defects has an additional source of non-linearity since the systems increases their level of asymmetry. This could, in turns, increase the local value of nonlinear coefficients and, hence, the collected back-scattered SH intensity.
The normalized spectra of fundamental wave and SH waveguide laser modes as obtained in end-coupling experiments are depicted in Fig. 3. As can be seen, the emission lines of fundamental wave and SH violet laser are peaked at 800 nm and 400 nm, respectively, clearly depicts the nonlinear process of SHG in BiB 3 O 6 waveguides. The frequency doubling laser at 400 nm was found along TM polarization, which is perpendicular to the fundamental wave polarizing orientation (TE polarization), i.e. TE ω + TE ω → TM 2ω frequency conversion, corresponding to the bulk Type I (i.e. e ω + e ω →o 2ω ) birefringent PM.  Figure 4 depicts the generated SH wave power at 400 nm as a function of the fundamental pump power at 800 nm from the fs inscribed BiB 3 O 6 cladding waveguide. As it can be observed, the maximum violet laser output power was measured to be ~1.05 mW when the fundamental laser power was around 328 mW, corresponding to a SH conversion efficiency of approximately ~0.32% (normalized value of ~0.98%/W), which is slightly larger than the reported SH conversion efficiencies for green laser in BiB 3 O 6 waveguides (~0.015%/W and 0.75%/W for fs laser fabricated Type II stress-induced and depressed cladding waveguides in BiB 3 O 6 crystals, respectively) [9,10]. However, this value is still on a relatively low level when compared to the conversion efficiency of BiB 3 O 6 bulk material pumped by Ti:sapphire laser (which is approximately 1.82% at 405 nm) [30], we believe that to be partly due to the high attenuation of the waveguide structure as well as the low pumping power. In addition to this, the non-single mode of the guidance in the waveguide may also an important factor leading to the reduction.

Summary
The 800→400 nm SHG has been successfully demonstrated in a BiB 3 O 6 cladding waveguide with a diameter of 150 μm fabricated by fs laser inscription technique. The μ-SH images of the waveguide's cross section have revealed that the nonlinear response of original BiB 3 O 6 crystal have been well preserved within the waveguide. We have obtained output SH powers up to ~1.05 mW with a conversion efficiency of ~0.32% (normalized value of ~0.98%/W) at 400 nm when the guiding structure was optically excited by a 300 mW 800 nm laser beam. The SHG performance indicates potential applications of the fs laser inscribed BiB 3 O 6 cladding waveguides as promising integrated frequency converters for violet light.