Quasi one-dimensional light beam generated by a graded-index microsphere

An optically illuminated micron-scale dielectric sphere can generate a photonic nanojet – a nonresonant propagating beam phenomenon of high amplitude, narrow waist, and substantial sensitivity to the presence of nanometer-scale particles and geometric features located within the beam. Via three-dimensional finite-difference time-domain computational electrodynamics modeling of illuminated graded-index microspheres, we have found that the useful length of a photonic nanojet can be increased by an order-of-magnitude to approximately 20 wavelengths. This is effectively a quasi one-dimensional light beam which may be useful for optical detection of natural or artificially introduced nanostructures deeply embedded within biological cells. Of particular interest in this regard is a potential application to visible-light detection of nanometer-scale anomalies within biological cells indicative of early-stage cancer. 2009 Optical Society of America OCIS codes: (210.0210) Optical data storage; (230.3990) Micro-optical devices; (290.1350) Backscattering. References and links 1. Z. Chen, A. Taflove, and V. Backman, “Photonic nanojet enhancement of backscattering of light by nanoparticles: A potential novel visible-light ultramicroscopy technique,” Opt. Express 12, 1214-1220 (2004). 2. X. Li, Z. Chen, A. Taflove, and V. Backman, “Optical analysis of nanoparticles via enhanced backscattering facilitated by 3-D photonic nanojets,” Opt. Express 13, 526-533 (2005). 3. S. Lecler, Y. Takakura, and P. Meyrueis, “Properties of a three-dimensional photonic jet,” Opt. Lett. 30, 2641-2643 (2005). 4. A. V. Itagi and W. A. Challener, “Optics of photonic nanojets,” J. Opt. Soc. Am. A 22, 2847-2858 (2005). 5. Z. G. Chen, X. Li, A. Taflove, and V. Backman, “Superenhanced backscattering of light by nanoparticles,” Opt. Lett. 31, 196-198 (2006). 6. A. Heifetz, K. Huang, A. V. Sahakian, X. Li, A. Taflove, and V. Backman, “Experimental confirmation of backscattering enhancement induced by a photonic jet,” Appl. Phys. Lett. 89, 221118 (2006). 7. A. M. Kapitonov and V. N. Astratov, “Observation of nanojet-induced modes with small propagation losses in chains of coupled spherical cavities,” Opt. Lett. 32, 409-411 (2007). 8. K. J. Yi, H. Wang, Y. F. Lu, and Z. Y. Yang, “Enhanced Raman scattering by self-assembled silica spherical microparticles,” J. Appl. Phys. 101, 063528 (2007). 9. S. Lecler, S. Haacke, N. Lecong, O. Crégut, J.-L. Rehspringer, and C. Hirlimann, “Photonic jet driven nonlinear optics: Example of two-photon fluorescence enhancement by dielectric microspheres,” Opt. Express 15, 4935-4942 (2007). 10. W. Wu, A. Katsnelson, O. G. Memis, and H. Mohseni, “A deep sub-wavelength process for the formation of highly uniform arrays of nanoholes and nanopillars,” Nanotechnology 18, 485302 (2007). 11. A. Heifetz, J. J. Simpson, S.-C. Kong, A. Taflove, and V. Backman, “Subdiffraction optical resolution of a gold nanosphere located within the nanojet of a Mie-resonant dielectric microsphere,” Opt. Express 15, 17334-17342 (2007). 12. M. Gerlach, Y. P. Rakovich, and J. F. Donegan, “Nanojets and directional emission in symmetric photonic molecules,” Opt. Express 15, 17343-17350 (2007). #104866 $15.00 USD Received 4 Dec 2008; revised 18 Jan 2009; accepted 19 Jan 2009; published 25 Feb 2009 (C) 2009 OSA 2 March 2009 / Vol. 17, No. 5 / OPTICS EXPRESS 3722 13. P. Ferrand, J. Wenger, A. Devilez, M. Pianta, B. Stout, N. Bonod, E. Popov, and H. Rigneault, “Direct imaging of photonic nanojets,” Opt. Express 16, 6930-6940 (2008). 14. S.-C. Kong, A. V. Sahakian, A. Heifetz, A. Taflove, and V. Backman, “Robust detection of deeply subwavelength pits in simulated optical data-storage disks using photonic jets,” Appl. Phys. Lett. 92, 211102 (2008). 15. S. Yang and V. N. Astrov, “Photonic nanojet-induced modes in chains of size-disordered microspheres with an attenuation of only 0.08 dB per sphere,” Appl. Phys. Lett. 92, 261111 (2008). 16. E. McLeod and C. B. Arnold, “Subwavelength direct-write nanopatterning using optically trapped microspheres,” Nat. Nanotech. 3, 413-417 (2008). 17. Z. Chen, H. Chu, and S. Li, “Optical metrology using a photonic nanojet,” U.S. Patent 7,394,535 (2008). 18. X. Cui, D. Erni, and C. Hafner, “Optical forces on metallic nanoparticles induced by a photonic nanojet,” Opt. Express 16, 13560-13568 (2008). 19. S.-C. Kong, A. V. Sahakian, A. Taflove, and V. Backman, “Photonic nanojet-enabled optical data storage,” Opt. Express 16, 13713-13719 (2008). 20. A. Devilez, B. Stout, N. Bonod, and E. Popov, “Spectral analysis of three-dimensional photonic jets,” Opt. Express 16, 14200-14212 (2008). 21. A. Taflove, and S. C. Hagness, Computational Electrodynamics: The Finite-Difference Time-Domain Method, 3 ed. (Artech, Boston, MA 2005). 22. S.-C. Kong, J. J. Simpson, and V. Backman, “ADE-FDTD scattered-field formulation for dispersive materials,” IEEE Microwave Wireless Comp. Lett. 18, 4-6 (2008). 23. E. Prodan, C. Radloff, N. J. Halas, and P. Nordlander, “A hybridization model for the plasmon response of complex nanostructures,” Science 302, 419-422 (2003). 24. J. F. Poco, and L. W. Hrubesh, “Method of producing optical quality glass having a selected refractive index,” U.S. Patent 6,158,244, (2008). 25. O. V. Mazurin, M. V. Streltsina, and T. P. Shvaiko-Shavaikovskaya, Handbook of Glass Data (Elsevier, Amsterdam, 1993). 26. M. A. Ordal, L. L. Long, R. J. Bell, S. E. Bell, R. R. Bell, R. W. Alexander, Jr., and C. A. Ward, “Optical properties of the metals Al, Co, Cu, Au, Fe, Pb, Ni, Pd, Pt, Ag, Ti, and W in the infrared and far infrared,” Appl. Opt. 22, 1099 (1983). 27. C. A. Balanis, Antenna Theory: Analysis and Design (John Wiley & Sons, New York, 1982). 28. H. Subramanian, P. Pradhan, Y. Liu, I. Capoglu, X. Li, J. Rogers, A. Heifetz, D. Kunte, H. K. Roy, A. Taflove, and V. Backman, “Optical methodology for detecting histologically unapparent nanoscale consequences of genetic alterations in biological cells,” Proc. National Acad. Sci. 105, 20124-20129 (2008).


Introduction
The photonic nanojet (PNJ) is a subwavelength (sub-λ) waist, high-intensity light beam that can propagate over a distance longer than λ after emerging from the shadow-side surface of an illuminated lossless dielectric microcylinder or microsphere of diameter larger than λ [1−20].The PNJ appears for a wide range of diameters of the microcylinder or microsphere if the refractive index contrast relative to the background is less than about 2:1 [1].
A key characteristic of the PNJ is that inserting within it a nanoparticle of diameter d ν perturbs the far-field backscattered power of the illuminated microsphere by an amount that varies as d ν 3 for a fixed λ.This perturbation is much slower than the d ν 6 dependence of Rayleigh scattering for the same nanoparticle.It leads to a situation where the backscattered power of a 3-µm polystyrene microsphere more than doubles if a 30-nm gold nanoparticle is inserted into the PNJ emerging from the microsphere, despite the nanoparticle having only 1/10,000 th the cross-section area of the microsphere [2].In effect, the PNJ strongly projects the presence of the nanoparticle to the far field.
We are interested in applying the far-field projection property of the PNJ to achieve high spatial resolution detection of nanostructures deeply embedded within biological cells, including both intrinsic nanostructures and artificially introduced nanoparticles.However, in pursuit of this goal, we have been limited by the short length of the PNJ (only in the order of λ), which allows it to interact with only near-surface features of the cell.
Consequently, we have conducted three-dimensional finite-difference time-domain (FDTD) computational electrodynamics modeling [21,22] to investigate how a PNJ's length might be increased while retaining its far-field projection property.In the approach reported in this paper, we consider grading the refractive index of the plane-wave-illuminated, PNJgenerating microsphere such that the refractive index decreases linearly in the radial direction.

Model of the graded-index microsphere
We define the refractive index contrast (relative to the background medium) of the gradedindex microsphere as ( ) Here, a is the radius of the microsphere and r is the distance from the microsphere's center.
In the present study, n max is set to 2. Thus, the refractive index contrast has a maximum value of 2 at the center of the microsphere, and decreases linearly in the radial direction to a minimum value of 1 at the microsphere surface.
In the present work, we consider refractive index gradings realized with 5, 10, or 100 distinct concentric shells.Fabrication of such microspheres should be possible using nanoshell techniques [23].The controlled synthesis of materials with refractive indices in the range 1.05 to 1.28 has been reported [24] by varying the composition and porosity of silica glass.Higher refractive indices from 1.4 to 1.9 can be obtained from various available glasses [25].

Field distribution and power flow
Figure 1(a) visualizes the FDTD-computed scattered electric-field (E-field) envelope, normalized relative to the incident plane-wave amplitude, for a homogeneous 2-µm diameter polystyrene microsphere (n = 1.59) illuminated in free space at λ = 400 nm.This visualization is in the plane cutting through the center of the microsphere that is defined by the incident x-directed E-field vector and z-directed Poynting vector.Figure 1(b) is the corresponding visualization for a homogeneous 2-µm diameter silica microsphere (n = 1.43).In each of these cases, a standing-wave pattern is observed within the microsphere.
Figure 1(c) visualizes the scattered E-field envelope for a graded-index microsphere of the same diameter as specified in Eq. ( 1), wherein the grading is realized with 100 concentric shells, each 10 nm thick.In this case, we see no standing waves within the microsphere, but instead a C-shaped pattern that connects to sidelobes adjacent to the PNJ.Comparing Figs.1(a), 1(b), and 1(c), we see that the graded-index microsphere generates a significantly elongated PNJ in the z-direction.
Figures 1(d) and 1(e) are E-field visualizations corresponding to Fig. 1(c) wherein the refractive index grading is realized with ten 100-nm-thick shells and five 200-nm-thick shells, respectively.We see that the field distributions in Figs.1(d) and 1(e) are qualitatively similar to the 100-shell case of Fig. 1(c), differing primarily by having a narrower PNJ beamwidth.Thus, we conclude that an elongated PNJ can be realized with a graded-index microsphere having a relatively small number of concentric shells, thereby being more practical from a manufacturing standpoint.3(a) and 3(b), we see that power flow within the graded-index microsphere is directed to its shadow side (and beyond into the PNJ) more smoothly in space, with greater amplitude, and with smaller transverse components than for the homogeneous polystyrene microsphere.Figure 4 graphs the normalized intensity along the z-axis within the center of the PNJ as a function of distance from the microsphere's shadow-side surface for the polystyrene microsphere of Fig. 1(a), the silica microsphere of Fig. 1(b), and the 100-shell graded-index microsphere of Fig. 1(c).We see that the PNJ intensity for the graded-index microsphere decreases more slowly with distance, especially beyond 2 µm (5λ).To quantify this, we define the PNJ beam length L beam as the distance from the microsphere's shadow-side surface to the point along the z-axis where the PNJ intensity drops to twice the incident.Here, the calculated L beam values are 1.87 µm (4.675λ) for the polystyrene microsphere, 2.04 µm (5.1λ) for the silica microsphere, and 4.72 µm (11.8λ) for the graded-index microsphere.From Fig. 5, we see that the graded-index microsphere has a much smaller backscattering than the two homogeneous microspheres; for example, ~30 dB lower than the polystyrene microsphere at λ = 400 nm.The decrease in backscattering results from the enhanced +z-directed transmission illustrated in Fig. 1(c) and Fig. 3. Furthermore, the backscattering of the graded-index microsphere varies little with operating wavelength, implying the possibility of broadband operation with little impact by resonant modes.
Previous studies [1,2,6] have shown that inserting a nanoparticle of diameter d ν within a PNJ perturbs the far-field backscattered power of an illuminated homogeneous dielectric microsphere by an amount that varies as d ν 3 for a fixed λ.Here, the microsphere's backscattering perturbation ∆I µ and the nanoparticle's effective backscattering enhancement factor EF v are defined as: where I µ is the backscattering intensity of the isolated microsphere, I v is the backscattering intensity of the isolated nanoparticle, and I µ+v is the backscattering intensity of the microsphere upon insertion of a nanoparticle within the PNJ generated by the microsphere.Thus, ∆I µ represents the measurement dynamic range required to detect the nanoparticle.As stated earlier, the d ν 3 dependence of ∆I µ for a fixed λ is much slower than the d ν 6 dependence of Rayleigh scattering for the same nanoparticle, if isolated.This leads to a situation where insertion of a nanoparticle within the PNJ generated by the microsphere can markedly impact the microsphere's backscattered power, especially for small-size nanoparticles.In effect, the PNJ strongly projects the presence of the nanoparticle to the far field.
We now consider the FDTD-computed backscattering perturbations for the homogeneous n = 1.59 polystyrene microsphere of Fig. 1(a), the homogeneous n = 1.43 silica microsphere of Fig. 1(b), and the 100-shell graded-index microsphere of Fig. 1(c).For each of these cases, Fig. 6(a) compares the backscattering perturbation ∆I µ at λ = 400 nm as a function of the distance between the shadow-side surface of the microsphere and the center of a 100-nm diameter gold nanoparticle inserted on the longitudinal axis of the nanojet.In order to model the Drude dispersion property of the gold permittivity at optical wavelengths, we used reported values of plasma angular frequency and collision frequency [26].
From Fig. 6(a), we see that at a gold nanoparticle distance of 100 -200 nm from the microsphere, the normalized backscattering intensity perturbation ∆I µ for the 100-shell graded-index microsphere is approximately 2000.This is much greater than the 4 -10 value for the two homogeneous dielectric microspheres.Furthermore, while ∆I µ for the homogeneous microspheres drops quickly below 1 (i.e., a 100% perturbation) for microsphere-nanoparticle separation distances greater than 500 nm (~1λ), ∆I µ of the gradedindex microsphere remains above 2 (i.e., a 200% perturbation) for separation distances up to at least 8 µm (20λ).This distance regime corresponds to the radiating near-field (Fresnel) region which lies between the reactive near-field region and far-field (Fraunhofer) region [27].It is of sufficient span to allow probing deeply for scattering nanostructures within a wide variety of individual biological cells.3) for a gold nanoparticle as a function of its diameter.The 100-shell graded-index microsphere of Fig. 1(c) is assumed, with the gold nanoparticle located at the center of the PNJ at a distance of 8 µm (20λ) from the shadow-side surface of the microsphere.These results show greater than 10:1 effective enhancements of the backscattering of nanoparticles having sizes below 50 nm relative to their backscattering if isolated, with enhancements rising above 100:1 for nanoparticles smaller than about 25 nm.  Figure 7(a) graphs the FDTD-computed half-power beamwidth (HPBW) of the original and elongated PNJs.Immediately adjacent to the microsphere shadow-side surface, the two homogeneous dielectric microspheres yield narrower HPBWs than the various realizations of the graded-index microsphere.However, the graded-index microsphere has a slower rate of increase of the HPBW with distance from the shadow-side surface.Furthermore, letting E R denote the local value of the PNJ electric field, we define a local PNJ figure of merit as E R × L beam /HPBW, which is graphed as a function of distance from the microsphere shadowside surface in Fig. 7(b).This figure of merit succinctly quantifies the primary characteristics of an intense quasi one-dimensional beam -namely, a large beam length to beamwidth ratio and a high value of electric field.Significantly higher values of this figure of merit are seen for the three realizations of the graded-index microsphere than for the two homogeneous microspheres for distances greater than about 0.2 µm beyond the microsphere.

Summary and discussion
In conclusion, our three-dimensional FDTD models show that a graded-index dielectric microsphere can generate a significantly longer photonic nanojet than the corresponding homogeneous microsphere.Furthermore, our results show that a gold nanoparticle located within such a nanojet appreciably perturbs the graded-index microsphere's backscattering even at a distance of 20 wavelengths beyond the microsphere.We have determined that the refractive index grading need not be continuous, but can be as coarse as five individual concentric shells of equal thickness comprised of materials already reported in the literature.These findings may facilitate the use of visible light for high-resolution optical detection of natural or artificially introduced nanostructures and inhomogeneities deeply embedded within biological cells.In particular, the elongated photonic nanojet satisfies the requirement of a quasi one-dimensional beam for partial-wave spectroscopy [28] detection of nanoscale anomalies within cells indicative of early-stage cancer.

Fig. 1 .
Fig. 1.Visualizations of the FDTD-computed scattered electric field for several 2 µm diameter dielectric microspheres for a 400 nm incident wavelength.Each panel spans 4 µm in the vertical (x) direction × 8 µm in the horizontal (z) direction).

Figure 2
Figure 2 shows little difference between the cases of Figs.1(c), 1(d), and 1(e) for the fall-off of the normalized E-field with distance from the microsphere's shadow-side surface along the z-axis.Figures 3(a) and 3(b) are arrow depictions of the time-averaged Poynting vector in the 3-D electromagnetic field corresponding to Figs. 1(a) and 1(c).Comparing Figs.3(a) and 3(b), we see that power flow within the graded-index microsphere is directed to its shadow side (and beyond into the PNJ) more smoothly in space, with greater amplitude, and with smaller transverse components than for the homogeneous polystyrene microsphere.

Fig. 6 .
Fig. 6.(a) FDTD-computed backscattering perturbation of the microsphere with a 100nm gold nanoparticle located on the z-axis.Horizontal scale: distance between the microsphere's shadow-side surface and the center of the gold nanoparticle.Three cases: homogeneous n = 1.59 polystyrene microsphere of Fig. 1(a), homogeneous n = 1.43 silica microsphere of Fig. 1(b), and 100-shell graded-index microsphere of Fig. 1(c).(b) FDTD-computed backscattering enhancement factor of a gold nanoparticle located 8 µm (20λ) beyond the shadow-side surface of the graded-index microsphere of Fig. 1(c).

Figure 6 (
Figure 6(b) graphs the FDTD-calculated backscattering enhancement factor EF ν defined in Eq. (3) for a gold nanoparticle as a function of its diameter.The 100-shell graded-index microsphere of Fig.1(c) is assumed, with the gold nanoparticle located at the center of the PNJ at a distance of 8 µm (20λ) from the shadow-side surface of the microsphere.These results show greater than 10:1 effective enhancements of the backscattering of nanoparticles having sizes below 50 nm relative to their backscattering if isolated, with enhancements rising above 100:1 for nanoparticles smaller than about 25 nm.