Surface defect gap solitons

We report on the existence of surface defect gap solitons. Such new type of solitons can be well supported by an interface between the defect of optical lattice and the uniform media with focusing saturable nonlinearity. The surface defect of optical lattice can profoundly affect the properties of solitons. It is shown that for the positive defect, stable solitons exist at the first bandgap and their powers decrease with defect depth; while for negative defect, stable solitons exist at the second bandgap and their powers increase with defect depth. Such solitons with moderate power between lower and higher ones cannot stably existent at the first bandgap. ©2006 Optical Society of America OCIS codes: (190.0190) Nonlinear optics; (190.5530) Pulse propagation and solitons. References and links 1. M. Cronin-Golomb, “Photorefractive surface waves,” Opt. Lett. 20, 2075-2077 (1995). 2. P. Yeh, A. Yariv, and A. Y. Cho, “Optical surface waves in periodic layered media,” Appl. Phys. Lett. 32, 104-105 (1978). 3. J. Schöllmann, R. Scheibenzuber, A. S. Kovalev, A. P. Mayer, and A. A. Maradudin, “Stability of stationary gap solitary waves at periodically modulated surfaces,” Phys. Rev. E 59, 4618 (1999). 4. K. G. Makris, S. Suntsov, D. N. Christodoulides, and G. I. Stegeman, “Discrete surface solitons,” Opt. Lett. 30, 2466-2468 (2005). 5. J. Hudock, S. Suntsov, D. N. Christodoulides, and G. I. Stegeman, “Vector discrete nonlinear surface waves,” Opt. Express 13, 7720-7725 (2005). 6. Y. V. Kartashov, V. A. Vysloukh, and L. Torner, “Surface gap solitons,” Phys. Rev. Lett. 96, 073901 (2006). 7. Y. V. Kartashov, A. A. Egorov, V. A. Vysloukh, and L. Torner, “Surface vortex solitons,” Opt. Express 14, 4049-4075 (2006). 8. I. L. Garanovich, A. A. Sukhorukov, and Y. S. Kivshar, “Surface multi-gap vector solitons,” Opt. Express 14, 4780-4785 (2006). 9. Y. V. Kartashov, F. Ye, and L. Torner, “Vector mixed-gap surface solitons,” Opt. Express 14, 4808-4824 (2006). 10. M. I. Molina, I. L. Garanovich, A. A. Sukhorukov, and Y. S. Kivshar, “Discrete surface solitons in semiinfinite binary waveguide arrays,” Opt. Lett. 31, 2332-2334 (2006). 11. Y. V. Kartashov, V. A. Vysloukh, D. Mihalache, and L. Torner, “Generation of surface soliton arrays,” Opt. Lett. 31, 2329-2331(2006). 12. S. Suntsov, K. G. Makris, D. N. Christodoulides, G. I.Stegeman, A. Hache, R. Morandotti, H. Yang, G. Salamo, and M. Sorel, “Observation of discrete surface solitons,” Phys. Rev. Lett. 96, 063901 (2006). 13. Christian R. Rosberg, Dragomir N. Neshev, Wieslaw Krolikowski, Arnan Mitchell, Rodrigo A. Vicencio, Mario I. Molina, and Yuri S. Kivshar, “Observation of Surface Gap Solitons in Semi-InfiniteWaveguide Arrays,” Phys. Rev. Lett. 97, 083901 (2006). 14. E. Smirnov, M. Stepic ́, C. E. Rüter, D. Kip, and Vladimir Shandarov, “Observation of staggered surface solitary waves in one-dimensional waveguide arrays,” Opt. Lett. 31, 2338-2340 (2006). 15. Georgios A. Siviloglou, Konstantinos G. Makris, Robert Iwanow, Roland Schiek, Demetrios N. Christodoulides and George I. Stegeman, “Observation of discrete quadratic solitons,” Opt. Express 14, 5508-5516 (2006). 16. Nonlinear Waves in Solid State Physics, edited by A. D. Boardman, M. Bertolotti, and T. Twardowski, NATO ASI Vol. 247 (Plenum, New York 1989); Nonlinear Surface Electromagnetic Phenomena, edited by H. E. Ponath and G. I. Stegeman (North-Holland, Amsterdam, 1991). #75347 $15.00 USD Received 22 September 2006; revised 17 October 2006; accepted 20 October 2006 (C) 2006 OSA 13 November 2006 / Vol. 14, No. 23 / OPTICS EXPRESS 11271 17. G. I. Stegeman, C. T. Seaton, “Nonlinear integrated optics,” J. Appl. Phys. 58, R57-R77 (1985); G. I. Stegeman, E. M. Wright, N. Finlayson, R. Zanoni, and C. T. Seaton, “Third order nonlinear integrated optics,” J. Lightwave Technol. 6, 953-970 (1988). 18. D. Mihalache, M. Bertolotti, and C. Sibilia, “Nonlinear wave propagation in planar structures,” Progr. Opt. 27, 229-313 (1989). 19. Near-Field Optics and Surface Plasmon Polaritons, edited by S. Kawata (Springer, New York, 2001). 20. A. A. Sukhorukov and Y. S. Kivshar, “Nonlinear Localized Waves in a Periodic Medium,” Phys. Rev. Lett. 87, 083901 (2001). 21. J. Yang and Z. Chen, “Defect solitons in photonic lattices,” Phys. Rev. E 73, 026609 (2006). 22. J. W. Fleischer, M. Segev, N. K. Efremidis, and D. N. Christodoulides, “Observation of two-dimensional discrete solitons in optically induced nonlinear photonic lattices,” Nature 422, 147-150 (2003). 23. Z. Chen and K. Mccarthy, “Spatial soliton pixels from partially incoherent light,” Opt. Lett. 27, 2019-2021 (2002). 24. R. Morandotti, H. S. Eisenberg, D. Dandelik, Y. Silberberg, D. Modotto, M. Sorel, C. R. Stanley, and J. S. Aitchison, “Interactions of discrete solitons with structural defects,” Opt. Lett. 28, 834-836 (2003). 25. U. Peschel, R. Morandotti, J. S. Aitchison, H. S. Eisenberg, and Y. Silberberg, “Nonlinearly induced escape from a defect state in waveguide arrays,” Appl. Phys. Lett. 75, 1348-1350 (1999). 26. F. Fedele, J. Yang, and Z. Chen, “Defect modes in one-dimensional photonic lattices,” Opt. Lett. 30, 15061508 (2005). 27. F. Fedele, J. Yang, and Z. Chen, “Properties of defect modes in one-dimensional optically induced photonic lattices,” Stud. Appl. Math. 115, 277-299 (2005). 28. I. Makasyuk, Z. Chen, and J. Yang, Technical Digest Series, Conference on Nonlinear Guided Waves and Their Applications, (Optical Society of America, Dresden, Germany, 2005), TuC8. 29. Y. H. Chen, J. W. Dong, and H. Z. Wang, “Conditions of near-zero dispersion of defect modes in onedimensional photonic crystal containing negative-index materials,” J. Opt. Soc. Am. B 23, 776-781 (2006). 30. Y. H. Chen, G. Q. Liang, J. W. Dong, and H. Z. Wang, “Derivtion and characterization of dispersion of defect modes in photonic band gap from stacks of positive and negative index materials,” Phys. Lett. A 351, 446-451 (2006). 31. J. W. Dong, Y. H. Chen, and H. Z. Wang, “Study on the dispersion and locazation of defect state in onedimensional photonic crystal consisting of metamaterials,” Acta. Phys. Sin. (In press). 32. Y. H. Chen, J. W. Dong and H. Z. Wang “Twin defect modes in one-dimensional photonic crystals with a single-negative defect,” Appl. Phys. Lett. 89, 141101 (2006). 33. D. V. Skryabin, “Coupled core-surface solitons in photonic crystal fibers,” Opt. Express 12, 4841-4846 (2005). 34. M. J. Ablowitz, B. Ilan, E. Schonbrun, and R. Piestun, “Solitons in two-dimensional lattices possessing defects, dislocations, and quasicrystal structures,” Phys. Rev. E 74, 035601 (2006).

Defect solitons are the nonlinear defect modes that bifurcate out from the linear defect modes.Such solitons have been investigated in the waveguide arrays with defocusing cubic nonlinearity [20].In particular, the defect of one-dimensional optical lattice features unique properties of solitons [21], for example, low-power defect solitons are linearly stable in lower bandgaps but unstable in higher bandgaps; while at higher powers defect solitons become unstable in attractive defects but can remain stable in repulsive defects [21].Recently, optical lattices have been successfully generated [22,23].In a waveguide array with defect, the propagation of light pulses with a small inputting angle was investigated [24].Linear defect modes in optical lattices have been reported [25][26][27].Recently, linear defect modes in both one-and two-dimensional photonic lattices have been successfully observed [28].Defect modes have been extensively studied in other systems e.g., in photonic crystals [29][30][31][32][33][34].Defect modes (especially, defect solitons) have the potential applications for the all-optical switches and routing of optical signals.
In all previous studies, however, the study of nonlinear defect modes in the form of surface wave has not been found yet.Therefore, the interesting issue is whether there exist surface nonlinear defect modes and their new properties at the interface between two media with different refractive index.
In this paper, we report on, for the first time to our knowledge, the existence of surface defect gap solitons (SDGSs).It is shown that stable SDGSs can be formed at the interface between the defect of optical lattice and uniform media with focusing saturable nonlinearity.The surface defect of lattice can provide new properties of solitons.For positive defect, stable SDGSs exist in the first bandgap and their powers decrease with the defect depth.For negative defect, stable SDGSs exist in the second bandgap and their powers increase with the defect depth.Their stabilities are also investigated.

The model
We consider beam propagation at the interface of uniform and one-dimensional optical lattice with a single-site defect in the focusing saturable nonlinear media described by the nonlinear Schrödinger equation.The nondimensionalized equation for the light field q is where I L is the intensity profile of the optical lattice when x ≥ -π/2, { } In Eq. ( 1), the diffraction length is L d =2k 1 D 2 /π 2 , x is the transverse scale whose real unit is D/π, E 0 is the applied dc field whose real unit is π 2 /(k 0 2 n e 4 D 2 γ 33 ), I 0 is the peak intensity uniform optical lattice, Ω describes lattice period (in this paper we take Ω=1), g(x) is a modulation function describing the shape of the defect, ε is the defect depth, D is the lattice spacing, k 0 =2π/λ 0 is the wave number (λ 0 is the wavelength in vacuum), k 1 =k 0 n e , n e is the unperturbed refractive index, and γ 33 is the electro-optic coefficient of the crystal.Here we assume that the defect is only a single lattice whose center is at x=0.We choose function g(x) as g(x)=exp(-x 8 /128).For positive defect ε>0, the light intensity I L of defect is higher than that without defect.While for negative defect ε<0, the light intensity I L of defect is lower than that without defect.For ε=0, optical lattices are uniform.The intensity distributions of defect lattice are shown for positive defect, negative defect and without defect in Figs.1(a)-(c), respectively.We take typical parameters as D=20 μm, λ 0 =0.5μm, n e =2.3, and γ 33 =280 pm/V, and take I 0 =3 and E 0 =6, which are typical in experimental conditions as shown in Ref. [21].To show the existent conditions for SDGSs, we search the Floquet-Bloch spectrum by substituting a solution q(x,z)=f(x)exp(ikx+iμz) to the linear version of Eq. ( 1), where μ is the propagation constant, k is the Bloch wave number and f(x) is a periodic function [here f(x)=f(x+π)].Figs.2(a) and (b) show bandgap structure of the uniform lattice at I 0 =3 and E 0 =6.We now consider the interface between the defect of the optical lattice and the uniform media.
We search for the stationary soliton profiles in the form of q(x,z)=f(x)exp(iμz), where f(x) is the real function satisfying the following equation The power P of a soliton is defined as By numerically solving Eq. (3) using shooting method, we get the soliton profiles.The soliton families are defined by propagation constantμ, lattice period Ω, defect depth ε and lattice modulation depth I 0 .To indicate the stability of SDGSs, we search for the perturbed solution of Eq. (1) in the form q(x,z)=[f(x)+h(x,z)+ie(x,z)]exp(iμz), where h, e are the real and imaginary parts of perturbation with a complex growth rate δ upon propagation.By linearing Eq. (1) around f (x) and keeping only the first-order terms in h(x, z) and e(x, z), one gets the eigenvalue problem: δh=-1/2∂ 2 e/∂x 2 +μe+E 0 e/(1+I L +f 2 ) and δe=1/2∂ We numerically solve these coupled equations to get the growth rate Re(δ).
The ability of periodic structures to dramatically modify beam diffraction leads the surface modes to be supported at or near the interface.The interface properties (e.g., the lattice depth and period) significantly affect soliton properties.In addition, gap solitons are formed when the light waves experience Bragg scattering from the periodic structure.Therefore, we predict that by modulating the depth of the single lattice in the interface, some new properties of surface modes could be produced.

Numerical results
To further study the SDGSs' robustness, in all numerical simulations based on Eq. ( 1), we add a noise to the inputted SDGSs by multiplying them with [1+ρ 1,2 (x)], where ρ 1,2 (x) is a Gaussian random function with <ρ 1,2 >=0 and <ρ 2  1,2 >=σ 2 1,2 (we choose that σ 1,2 is equal to 10% the input soliton amplitude).For ε>0, we find that SDGSs are only at the first bandgap; while for ε<0, SDGSs are only at the second bandgap, which is similar to the report in Ref. [21].Figures 2(a) and 2(c) show that the power of SDGS depends on the eigenvalue for ε=0.5 and ε=-0.5, respectively.In addition, we find that the power is monotonically increasing for ε=0.5 in the domains of -0.9≤μ≤-0.8 (-0.9 corresponds to A) and μ≤-1.8 (-1.8 corresponds to C) [Fig.2(a)] and for ε= -0.5 in the domains of -3.64<μ<-2.95[Fig.2(c)], i.e., dp/dμ>0, which implies in these domains stable SDGSs are formed according to the Vakhitov-Kolokolov criterion.However, the power of SDGS is not monotonically increasing in the domain of eigenvalue -1.8<μ<-0.9 for ε=0.5 [Fig.2(a)], which implies SDGSs can not stably propagate in this domain.We also calculate the growth rate of perturbation by solving the coupled equations in section 2. The growth rate of perturbation for ε=0.5 shown in Fig. 2(b) indicates the instability of solitons in the domain of eigenvalue -1.8<μ<-0.9, which demonstrates further the above analytic result.We perform numerical simulations by selecting the parameters of A, B and D in Fig. 2(a) and E, F and G in Fig. 2(c).The results, plotted in Figs.2(d), 2(e), 2(g), 2(h), and 2(j)-2(o), show that SDGSs can stably propagate for a distance of z=200.Figures 2(f) and 2(i), corresponding to B in Fig. 2(a), show that soliton with μ=-1.4 is unstable upon propagation.All these simulations prove the above analytic results.These results show: (1) both lower-and higher-power SDGSs can stably exist at the first bandgap (corresponding to the positive defect) and the second bandgap (corresponding to the negative defect), which is different from the results in Ref. [21] where low-power defect solitons are linearly stable at the first bandgap and at higher powers defect solitons become unstable in positive defects, but can be stable in negative defects; (2) the stable SDGSs with moderate power between the lower and higher ones cannot exist at the first bandgap but exist at the second bandgap, which is different from the results in Ref. [21] where at the first bandgap, as the power increases solitons alternate between stable and unstable regions as the power goes up.Finally, we give the surface gap solitons at the interface between uniform media and the optical lattice, which is actually a particular case of defect ε=0.The surface gap solitons with ε=0 have been investigated in another system with Kerr-type media [6].We find that surface gap solitons also exist in the system with focusing saturable nonlinearity modeled by Eq. (1). Figure 5

Summary
To summarize, we reveal the existence of surface defect gap soliton.Such new type of solitons are supported by an interface between the defect of optical lattice and the uniform media with focusing saturable nonlinearity when light wave at the interface experiences Bragg scattering.The surface defect of optical lattice offers new properties of solitons.Their powers decrease and increase with the defect depth for the positive defect and the negative defect, respectively.Such solitons with lower and higher power can exhibit stable propagation at the first and second bandgaps, while those with moderate power can stably exist at the second bandgap but cannot stably exist at the first bandgap.