One-laser interferometric broadband coherent anti-Stokes Raman scattering

We introduce an interferometric technique for eliminating the non-resonant background of broadband coherent anti-Stokes Raman scattering (CARS) microscopy. CARS microscopy has been used for imaging a number of biological samples and processes, but the studies are mostly limited to detecting lipids in biological systems by probing the C-H stretch. Non-resonant background and incoherent noise sources can easily overwhelm less intense signals from other molecular vibrations. In this study, we demonstrate a one-laser broadband interferometric technique that separates the spontaneous Raman scattering-related component of the CARS signal from the non-resonant background using liquid benzonitrile as a model system. Official contribution of the National Institute of Standards and Technology; not subject to copyright in the United States. OCIS codes: (300.6230) Spectroscopy, coherent anti-Stokes Raman scattering; (110.0180) Microscopy; (190.4370) Nonlinear optics, fibers; (120.3180) Interferometry References and links 1. M. D. Duncan, J. Reintjes, and T. J. Manuccia, "Scanning coherent anti-Stokes Raman microscope," Opt. Lett. 7, 350-352 (1982). 2. J. X. Cheng and X. S. Xie, "Coherent anti-Stokes Raman scattering microscopy: Instrumentation, theory, and applications," J. Phys. Chem. B 108, 827-840 (2004). 3. A. Zumbusch, G. R. Holtom, and X. S. Xie, "Three-dimensional vibrational imaging by coherent antiStokes Raman scattering," Phys. Rev. Lett. 82, 4142-4145 (1999). 4. M. O. Scully, G. W. Kattawar, R. P. Lucht, T. Opatrny, H. Pilloff, A. Rebane, A. V. Sokolov, and M. S. Zubairy, "FAST CARS: Engineering a laser spectroscopic technique for rapid identification of bacterial spores," PNAS 99, 10994-11001 (2002). 5. S. A. Schaertel, A. C. Albrecht, A. Lau, and A. Kummrow, "Interferometric coherent Raman-spectroscopy with incoherent-light some applications," Appl. Phys. B: Lasers Opt. 59, 377-387 (1994). 6. J. X. Cheng, Y. K. Jia, G. F. Zheng, and X. S. Xie, "Laser-scanning coherent anti-Stokes Raman scattering microscopy and applications to cell biology," Biophys. J. 83, 502-509 (2002). 7. H. F. Wang, Y. Fu, P. Zickmund, R. Y. Shi, and J. X. Cheng, "Coherent anti-Stokes Raman scattering imaging of axonal myelin in live spinal tissues," Biophys. J. 89, 581-591 (2005). 8. E. O. Potma, X. S. Xie, L. Muntean, J. Preusser, D. Jones, J. Ye, S. R. Leone, W. D. Hinsberg, and W. Schade, "Chemical imaging of photoresists with coherent anti-Stokes Raman scattering (CARS) microscopy," J. Phys. Chem. B 108, 1296-1301 (2004). 9. J. X. Cheng, A. Volkmer, L. D. Book, and X. S. Xie, "Multiplex coherent anti-Stokes Raman scattering microspectroscopy and study of lipid vesicles," J. Phys. Chem. B 106, 8493-8498 (2002). 10. K. P. Knutsen, J. C. Johnson, A. E. Miller, P. B. Petersen, and R. J. Saykally, "High spectral resolution multiplex CARS spectroscopy using chirped pulses," Chem. Phys. Lett. 387, 436-441 (2004). 11. M. Muller and J. M. Schins, "Imaging the thermodynamic state of lipid membranes with multiplex CARS microscopy," J. Phys. Chem. B 106, 3715-3723 (2002). 12. H. Kano and H. Hamaguchi, "Femtosecond coherent anti-Stokes Raman scattering spectroscopy using supercontinuum generated from a photonic crystal fiber," Appl. Phys. Lett. 85, 4298-4300 (2004). 13. T. W. Kee and M. T. Cicerone, "Simple approach to one-laser, broadband coherent anti-Stokes Raman scattering microscopy," Opt. Lett. 29, 2701-2703 (2004). 14. G. I. Petrov and V. V. Yakovlev, "Enhancing red-shifted white-light continuum generation in optical fibers for applications in nonlinear Raman microscopy," Opt. Express 13, 1299-1306 (2005). #68188 $15.00 USD Received 17 February 2006; revised 28 March 2006; accepted 30 March 2006 (C) 2006 OSA 17 April 2006 / Vol. 14, No. 8 / OPTICS EXPRESS 3631 15. J. L. Oudar, R. W. Smith, and Y. R. Shen, "Polarization-sensitive coherent anti-Stokes Ramanspectroscopy," Appl. Phys. Lett. 34, 758-760 (1979). 16. A. Volkmer, L. D. Book, and X. S. Xie, "Time-resolved coherent anti-Stokes Raman scattering microscopy: Imaging based on Raman free induction decay," Appl. Phys. Lett. 80, 1505-1507 (2002). 17. J. X. Cheng, A. Volkmer, L. D. Book, and X. S. Xie, "An epi-detected coherent anti-Stokes Raman scattering (E-CARS) microscope with high spectral resolution and high sensitivity," J. Phys. Chem. B 105, 1277-1280 (2001). 18. Y. Yacoby, R. Fitzgibbon, and B. Lax, "Coherent cancellation of background in 4-wave mixing spectroscopy," J. Appl. Phys. 51, 3072-3077 (1980). 19. C. L. Evans, E. O. Potma, M. Puoris'haag, D. Cote, C. P. Lin, and X. S. Xie, "Chemical imaging of tissue in vivo with video-rate coherent anti-Stokes Raman scattering microscopy," PNAS 102, 16807-16812 (2005). 20. E. O. Potma, C. L. Evans, and X. S. Xie, "Heterodyne coherent anti-Stokes Raman scattering (CARS) imaging," Opt. Lett. 31, 241-243 (2006). 21. D. Oron, N. Dudovich, D. Yelin, and Y. Silberberg, "Quantum control of coherent anti-Stokes Raman processes," Phys. Rev. A 65, (2002). 22. S. H. Lim, A. G. Caster, and S. R. Leone, "Single-pulse phase-control interferometric coherent anti-Stokes Raman scattering spectroscopy," Phys. Rev. A 72, (2005). 23. D. L. Marks, C. Vinegoni, J. S. Bredfeldt, and S. A. Boppart, "Interferometric differentiation between resonant coherent anti-Stokes Raman scattering and nonresonant four-wave-mixing processes," Appl. Phys. Lett. 85, 5787-5789 (2004). 24. http://www.chemistry.ohio-state.edu/~rmccreer/freqcorr/images/benzo.html. 25. Certain equipment, instruments or materials are identified in this paper in order to adequately specify the experimental details. Such identification does not imply recommendation by the National Institute of Standards and Technology nor does it imply the materials are necessarily the best available for the purpose.


Introduction
Coherent anti-Stokes Raman scattering (CARS) microscopy was first demonstrated by Duncan et al. [1], but its currently burgeoning popularity was spurred by the implementation of a simplified co-linear optical geometry [2,3].CARS microscopy uses molecular vibrations as contrast and it has many attractive features for biological and materials imaging.It provides excellent sensitivity, high spatial resolution and inherent chemical specificity.The CARS process gives similar vibrational spectral information as spontaneous Raman scattering, but it is orders of magnitude more efficient [4].This property allows CARS microscopy to be performed noninvasively at low laser power, which is important when imaging delicate biological specimens.
CARS is a nonlinear scattering technique in which pulsed light having at least two frequencies is mixed within a sample.Pump, Stokes and probe light at frequencies ω p , ω S , ω pr overlap temporally and spatially to produce anti-Stokes light at frequency ω aS = ω p -ω S + ω pr .
Fig. 1(a) provides the energy-level diagram for the CARS process.The anti-Stokes signal is proportional to the third-order nonlinear susceptibility, χ (3) , which has both vibrationally resonant (χ R (3) ) and non-resonant (χ NR (3) ) components; χ R (3) is the component of interest and it is related to the Raman-scattering cross section.Fig. 1(b) provides one of the 40 possible energy-level diagrams for the non-resonant processes [5].As the diagram illustrates, the nonresonant scattering contains no information about the vibrational energy levels of the molecule.Furthermore, the non-resonant scattered light interferes coherently with the resonant signal so as to distort the bandshapes (as compared to natural spontaneous Raman bandshapes).Although the signal contribution originating from the non-resonant background is often sufficient to obscure weak resonant signals, narrow-band CARS has been demonstrated to be effective in biological [4,6,7] and materials imaging [8], provided that resonant signal strength is sufficiently high with respect to the non-resonant background.
The ability to characterize chemical species or biological components noninvasively within a complex heterogeneous system is of great interest in the physical and life sciences.CARS microscopy has the potential to fill this need; owing to its contrast mechanism, it has tremendous chemical resolving power since each chemical component within a sample has a unique spectral signature.The actual chemical resolving power rests in spectral bandwidth, spectral resolution and signal-to-noise levels.In response to the need for increased spectral bandwidth, multiplex [9][10][11] and broadband [12][13][14] CARS methods have been introduced recently, demonstrating single-shot spectral bandwidths ranging from 250 cm -1 to more than 2500 cm -1 .Signal-to-noise issues can be dominated by the non-resonant background, particularly for broadband CARS.Spectral features in the fingerprint region are often weak, and are usually obscured by noise from the non-resonant background when imaging biological systems.
The presence of non-resonant background reduces the sensitivity of CARS.The nonresonant contribution to the total signal cannot be discarded using a baseline correction method.This is due to mixing of the resonant and non-resonant components in the third order nonlinear polarization, as will be discussed in the "Theory" section below.Many approaches have been established for reducing the non-resonant background, including polarization control [15], temporal delay of probe with respect to the pump and Stokes fields [16], and epidetection [17] of the CARS signal.The former two suffer from significantly decreased signal levels, and the latter is applicable only to features that are small compared to the wavelength of the scattering light.Heterodyne and interferometric methods (see below) are also effective in reducing non-resonant background [18][19][20][21][22][23]; they appear to hold the greatest promise for general use for the following reasons.These methods can be used to selectively suppress the non-resonant background while enhancing the resonant signal, and they allow separation of the real and imaginary parts of the resonant signal (χ R' (3) and χ R'' (3) ), as well as linearization of the resonant signal with respect to concentration of analyte in the sample.Yacoby et al. [18] were among the first to show that the non-resonant background associated with a signal of interest could be suppressed by interfering it with a non-resonant background that is generated separately.Xie et al. [19] applied a similar approach to multiplex CARS microscopy with a fairly straightforward experimental arrangement; however, the signal of interest and the non-resonant local oscillator were generated in separate samples, so it was necessary to account for the differential phase shift or differential chirp between the local oscillator and signal; this was later overcome with lock-in analysis [20].
Silberberg [21] has demonstrated a reduction in the non-resonant background through interfering different spectral components of a single pulse using a pulse-shaping approach.Leone et al. [22] have improved on this method.An advantage of this method is that all light transverses the same beam path, so there are no issues that arise due to differential chirp in a broadband or multiplex measurement.A slight disadvantage of this approach is that the number of elements in the spatial light modulator limits the product of spectral resolution and spectral range.Boppart [23] has demonstrated a narrowband interferometric CARS method in which the local oscillator is generated by an optical parametric amplifier (OPA).The CARS signal and local oscillator are coherent, and are combined in a Mach-Zehnder interferometer.This technique gives a clear interferometric differentiation between the resonant CARS signal and the non-resonant four-wave-mixing signal; however, temporal jitter is a major source of noise due to intrinsically long arm-lengths (OPA source has up to 1 m pathlength) of the interferometer.
We present a new technique for interferometric suppression of the non-resonant background generated along with CARS.The approach is based on interferometric mixing of the CARS signal with a local oscillator that is generated within the sample.There are several advantages of this method.One is that the instrument employs a single Ti:sapphire laser and it is easy to implement.Another advantage is that there are no artifacts due to sample-dependent differential chirp between the signal and local oscillator.This feature is critical for implementation of this approach to microcopy, and is realized because the local oscillator and the resonant signal are generated in the same spot of the sample.Additionally, the interferometer used in this study can have very short arms; we have used an arm-length of 65 mm, but this could be reduced somewhat.The short arm-length allows the instrument to have low temporal jitter.CARS spectra that are free of non-resonant background can be extracted with this interferometric technique.A practical drawback of the approach as demonstrated is that the local oscillator contains some resonant component, and thus is non-ideal.The nonideality results in slight bandshape distortions of the imaginary resonant signal.The practical effects of the non-ideality could be overcome with a sufficiently broadband probe pulse used in generation of the local oscillator (see below).In this proof-of-principle study, neat liquid benzonitrile is selected as a model system due to its prominent peaks throughout the vibrational spectrum [24].

Theory
When sufficiently intense light of at least two frequencies interacts with a material, a thirdorder nonlinear polarization, P i (3) , is generated along some polarization direction i in the sample according to where E are the electric field vectors, the subscripts p, pr, and S indicate pump, probe, and Stokes light respectively, and symbols j, k, l indicate polarization directions.In the collinear CARS geometry, only two polarizations need to be considered.The sum is over all four combinations of driving field polarizations [15].
The imaginary part χ R'' (3) contains elements with the same bandshape as the spontaneous Raman signal, and it is the component of interest to us.This component, however, cannot be extracted directly from the CARS signal I, because , thus the real and imaginary parts are convolved.The χ R'' (3) can be extracted from the overall CARS signal using interferometric methods.
For light traveling along the z-axis, the x-polarized component of each field (E m ) in Eq. ( 1) may be described by: (3) An analogous relation could be written for the component of light polarized along the y-axis.The phase term does not have a superscript indicating polarization; the phase relationship between the x and y-polarized components is determined by the overall polarization state of the light.The i-polarized component of the overall third-order nonlinear polarization can be written as In the approach described here, we generate two separate CARS signals with two orthogonally polarized pump/probe pulses with temporal widths of 100 fs and 750 fs.One of the CARS signals can be used as the local oscillator, provided that it has a reduced (preferably absent) resonant component.The 100 fs and 750 fs transform-limited pump/probe pulses are assigned subscripts 1 and 2 respectively.We must consider four distinct CARS driving fields, with p, pr = 1,1; 1,2; 2,1; 2,2.There is only one Stokes field, with a subscript 3. The term φ 3 is dropped because it is identical for each of the driving fields, and will not contribute to the behavior of the interferometric response.Since φ 2 is fixed and only the relative phase between the pulses is of concern, we further simplify our analysis by assigning φ 2 to be equal to zero.Finally, we substitute ω aS for (ω p + ω pr -ω 3 ) since ω 1 and ω 2 are degenerate.These simplifications allow us to write Recognizing that it is the real part of the complex electric field expression that is of interest, we can use Euler's formula to write an expression for the interferometric CARS signal intensity ( dt ) as a function of the phase of beam 1 as: where t' = ω aS t, and each coefficient C p,pr represents the pre-exponential term in Eq. ( 5) for each pump/probe pair, e.g. ,  ,  ; ) ( . These coefficients are complex, with resonant and non-resonant components, analogous to the χ (3) values of Eq. ( 2).The integrated expression describes the interferometric CARS signal and it has five groups of terms with respect to the dependence on φ 1 . .
The terms with a 2φ 1 dependence arise from the interactions between the 1,1 and 2,2 (1,1:2,2) components.The terms with a φ 1 dependence, however, are derived from the interactions between the (1,1:1,2), (1,1:2,1), (2,2:1,2), and (2,2:2,1) components.The CARS signals represented by C 2,2 and C 1,2 are generated by a 750 fs probe pulse, and are therefore highresolution spectra.The CARS signals represented by C 1,1 and C 2,1 are, on the other hand lowresolution spectra since they are generated with a 100 fs probe pulse.In the scheme we have devised, the low-resolution spectra serve as a slightly non-ideal local oscillator, and the highresolution spectra serve as the signal of interest.
The φ 1 -dependent and the 2φ 1 -dependent signals are analogous, as indicated by the organization of Eq. ( 7).In fact, φ 1 and 2φ 1 give the same bandshape, as will be demonstrated in the "Results and discussion" section.For a purely non-resonant signal, the sin(φ 1 ) and sin(2φ 1 ) terms vanish.This fact is used to calibrate the differential phase as a function of wavelength (see below).In the presence of a resonant signal, the sine terms primarily represent the interaction between the local oscillator and the imaginary part of the resonant signal.This contribution would be the only signal represented in these terms in the limit of an ideal local oscillator (no resonant components of C 1,1 or C 2,1 ).A similar argument can be made for the cosine terms -they primarily represent the interaction between the local oscillator and the real component of the resonant signal.The contribution of each group of the terms described in Eq. ( 7) can be extracted from experimental data by Fourier transform.

Experimental
The experimental setup is shown in Fig. 2. It employed a single titanium sapphire oscillator (Coherent Mira 900F) pumped by a 10-W Nd:YVO 4 laser (Coherent Verdi), producing 100 fs pulses centered at 820 nm, with a repetition rate of 76 MHz [25].After passing through an optical isolator, the oscillator output was split into two parts by a beamsplitter.One beam was directed into a combined dispersionless filter/interferometer [13].This component of the oscillator output was dispersed with a diffraction grating (1200 lines/mm), and collimated with a lens (f = 500 mm).The collimated beam was then separated into the two arms of an xxxxxxxxx interferometer by a polarizing beamsplitter cube.The horizontally polarized component was retro-reflected by a mirror mounted on a piezo-electric transducer.This light constituted the low spectral resolution pump/probe (pulse width of 100 fs, bandwidth of 150 cm -1 ).The bandwidth of the vertically polarized component, was limited by a slit placed near the Fourier plane to approximately 20 cm -1 (pulse width of 750 fs), and retro-reflected by a mirror placed at the Fourier plane.This light was used as the high spectral resolution pump/probe.The two reflected beams were slightly displaced vertically to allow recovery from the dispersionless filter.The second part of the oscillator output was introduced into a photonic crystal fiber (Crystal Fibre) to create a continuum that spans the range 500 nm -1100 nm [25].The portion of the continuum at wavelengths longer than 820 nm was used as Stokes light.The polarization of the Stokes light was set to be 45° from pump and probe light.Pump, probe and Stokes light were combined through a long wave pass edge filter (Semrock) and then focused with an 0.8 NA objective lens (Zeiss 50x EC Epiplan Neofluar) on the sample, which consisted of neat benzonitrile (Sigma-Aldrich) in a 1 mm-thick sample cell [25].The power levels of the 20 cm -1 and 150 cm -1 pump/probe light at the sample are 7 mW and 2 mW respectively; additionally, the broadband Stokes light has a power of 5 mW.The anti-Stokes signal generated by these three pulses was collected with a 0.5 NA objective lens (Zeiss 50x Epiplan) and separated with the use of a short-pass filter.The vertically polarized portion was selected using a polarizer and then dispersed onto a spectrograph where interference between the various CARS signals occurred.Interferograms from each column of pixels were collected and recorded by an electron multiplying CCD camera (Princeton Instruments) [25].Each CARS spectrum required an acquisition time of 80 ms, and each interferogram consisted of 256 spectra.

Results and discussion
The broadband CARS spectra of benzonitrile generated individually by pump/probe light from the two arms of the interferometer are presented in Fig. 3.The spectrum in Fig. 3(a) is obtained by using 100 fs pulses as both pump and probe, where 750 fs pulses are used to acquire the spectrum in Fig. 3(b).The spectral resolutions are 150 cm -1 and 20 cm -1 , respectively.The acquisition time for each broadband CARS spectrum is 20 ms.In this interferometric CARS scheme, the spectrum shown in Fig. 3(a) is used as the local oscillator to interfere with the signal (Fig. 3(b)).The electric fields of these two signals interfere with one another at each CCD camera pixel.Figure 4(a) shows interferograms generated at two particular pixels by changing the length of one arm of the interferometer (i.e., by changing φ 1 , see Eq. ( 6) and Eq. ( 7)).

CARS Intensity
Fig. 3. Broadband CARS spectra of benzonitrile from each of the two arms of the interferometer.The spectra are generated by using (a) 100 fs pulses (spectral width 150 cm -1 ) and (b) 750 fs pulses (20 cm -1 ) as pump and probe.
The dash curve in Fig. 4(a) is an interferogram recorded at 2500 cm -1 where there is no vibrational resonance.The solid curve is an interferogram obtained at 3070 cm -1 where the aromatic C-H stretch vibrational resonance occurs in benzonitrile.The vibrational resonance contributes sin(φ 1 ) and sin(2φ 1 ) components to the interferogram, and it is evident that the two interferograms have different waveforms; the difference between the two interferograms is shown in Fig. 4(a).We extract the amplitudes of the individual sine terms by Fourier analysis, which necessitates a priori knowledge of the phase of the non-resonant component at each anti-Stokes wavelength.This wavelength-dependent phase information is obtained by collecting interferograms for a purely non-resonant spectrum generated by replacing the sample with a glass coverslip.Interferograms obtained in this manner are referenced to an interferogram that is simultaneously obtained by mixing the 100 fs and 750 fs pump beams on a photodiode.This calibration procedure yields a differential chirp, Δφ(ω), (Δφ(ω) = φ NR (ω)θ), where φ NR (ω) is the phase of the interferograms of a non-resonant sample (glass cover-slip) at ω and θ is the phase of the reference interferogram.The Δφ(ω) for our experimental configuration is presented in Fig. 4(b); the average value is zero with a standard uncertainty of 0.06.The mild frequency dependence of Δφ(ω) is a result of the fact that the local oscillator and the signal are generated in the same spot on the sample.This is an attractive feature of the instrument because the absence of a significant differential chirp will not result in artifacts in the interferograms.dependence.This signal is selected because it has a higher modulation amplitude than the signal with a 2φ 1 dependence, resulting in a higher signal-to-noise ratio.The real part of the χ (3) signals is shown in Fig. 5(a) and it consists of the non-resonant background and the real component of the nonlinear susceptibility χ (3) .Fig. 5(b) represents the imaginary component and hence the imaginary part of χ (3) .Note that the baseline of this spectrum is zero, free of non-resonant background.All the characteristic peaks of benzonitrile are recovered by the interferometric CARS technique [24].The peaks at 2230 cm -1 and 3070 cm -1 are slightly distorted, having a negative amplitude component, as shown in Fig. 5(b).In our experimental configuration, the (non-ideal) local oscillator contains both real and imaginary components.The negative amplitude observed in Fig. 5(b) arises from the interaction between the imaginary parts of χ (3) generated by the 100 fs and 750 fs pulses, as demonstrated by the sin(φ 1 ) term in Eq. ( 7).The asymmetry in the negative amplitude components is probably due to a slight mismatch between the central wavelengths of the 100 fs and 750 fs pulses.In the limit that the local oscillator has only non-resonant contributions, the bandshape of the xxxxxxx recovered peaks will be similar to those of spontaneous Raman scattering.This feature is highly desirable when CARS spectra are used directly for identification of chemical species.One possible method to achieve a dominantly non-resonant local oscillator is to broaden the bandwidth of the probe pulse from its current value of 150 cm -1 (100 fs).It has been shown that the ratio between the resonant and non-resonant contributions is strong function of laser bandwidth [2].Using a computer simulation based on the equations in the "Theory" section, we determined that with a bandwidth of 750 cm -1 (20 fs), the negative amplitude component in Fig. 5(b) would fall below the signal-to-noise ratio of approximately 5% in the current experiment.Another advantage of using interferometric detection, in addition to recovering the bandshapes of the vibrationally resonant peaks, is to increase detection sensitivity.Interferometric/heterodyne methods are often used to increase the detection sensitivity by mixing the signal field (E sig ) with a strong local oscillator field (E lo ).In the case that the local oscillator field is significantly stronger than the signal field, i.e., E lo >> E sig , it is well known that the noise of the interferometric signal approaches the shot noise of the signal field.In the current experimental configuration, the local oscillator field is comparable to the signal field, thus the signal-to-noise ratio of interferometric CARS data is not considerably higher than in the case of broadband CARS.In order to improve the signal-to-noise ratio significantly, a strong local oscillator field must be used.For instance, Potma et al. recently demonstrated that interferometric CARS can be used to detect dodecane at a 1% (approximately 4 mM) concentration level with a strong local oscillator generated in deuterated dimethyl sulfoxide [20].A potential source of strong local oscillator field in our experimental configuration is broadband supercontinuum, e.g., supercontinuum generated by optically pumping a photonic crystal fiber, as shown in Fig. 2.An attempt was made to use this light source as local oscillator but the coherence of the supercontinuum from 630 nm to 820 nm was insufficient to produce an interferometric signal when mixed with the broadband CARS signal.Other approaches are currently implemented in our laboratory to produce a strong local oscillator field that is purely non-resonant.
Considerable improvement of data acquisition rate must be achieved to facilitate microspectroscopy experiments.In this proof-of-principle experiment, the slow acquisition rate of interferograms is impractical for any micro-spectroscopy experiments, but studies are underway to increase the data acquisition rate significantly by using a strong local oscillator.With increased data acquisition rate, detection sensitivity, along with elimination of the nonresonant background, we expect that interferometric broadband CARS microscopy will become an important noninvasive technique in biological imaging that uses molecular vibrations as contrast.

Conclusion
We have demonstrated a one-laser interferometric technique that separates the non-resonant background from the CARS signal.In this simple interferometric CARS approach, there exists essentially no differential chirp between the local oscillator and signal.This attractive feature is due to the simultaneous generation of the two interfering parts at the same location on the sample.This technique has potential to become a robust biological imaging tool because the sensitivity, chemical species-identification ability, and rate of data acquisition can be improved significantly with existing methods.

Fig. 2 .
Fig.2.Experimental configuration: BC, beamsplitter cube; DG, diffraction grating; PBC, polarizing beamsplitter cube; PZT, piezo-electric transducer; PCF, photonic crystal fiber; LP, long wave pass edge filter; Obj, microscope objective; SP, shortpass filter; Pol, polarizer.The inset spectra are (from top) the 750 fs, and 100 fs outputs of Mira 900, output of PCF, and polarization scheme of the input beams.The PCF feed light is arbitrarily scaled and superimposed on the PCF output spectrum.

Fig. 4 .
Fig. 4. (a) CARS interferograms of benzonitrile -at 3070 cm -1 , (resonant, bold solid curve), 2500 cm -1 , (non-resonant, dash) and the difference between the interferograms (thin solid).(b) Differential chirp between the local oscillator and signal as a function of wavenumbers, see text for details.Fourier transform of the interferograms yields the real and imaginary components of the χ (3) signals, as shown in Fig. 5. Interferometric data collected in two phase cycles were used in Fourier transform.As established in Eq. (7), the interferograms contain two signals with the same spectral bandshape with φ 1 and 2φ 1 dependences, where φ 1 is the interferometric phase delay.The results presented in Fig. 5 are derived from the interferometric signals with a φ 1

Fig. 5 .
Fig. 5. (a) Real and (b) imaginary components of χ (3) of benzonitrile determined by Fourier analysis of the φ 1 dependent interferometric signals (see text for details).The inset in (b) is the imaginary component of χ (3) determined from the interferometric signals oscillating at 2φ 1 .