Shape resonance omni-directional terahertz filters with near-unity transmittance

Terahertz transmission filters have been manufactured by perforating metal films with various geometric shapes using femtosecond laser machining. Two dimensional arrays of square, circular, rectangular, cshaped, and epsilon-shaped holes all support over 99% transmission at specific frequencies determined by geometric shape, symmetry, polarization, and lattice constant. Our results show that plasmonic structures with different geometric shaped holes are extremely versatile, dependable, easy to control and easy to make terahertz filters. ©2006 Optical Society of America OCIS codes: (240.6690) Surface waves; (050.1220) Apertures; (300.6270) Far infrared spectroscopy References and links 1. T. W. Ebbesen, H. L. Lezec, H. F. Ghaemi, T. Thio, and P. A. Wolff, “Extraordinary optical transmission through sub-wavelength hole arryas,” Nature (London) 391, 667 (1998). 2. L. Salomon, F. Grillot, A. V. Zayats, and F. Fronel, “Near-field distribution of optical transmission of periodic subwavelength holes in a metal film,” Phys. Rev. Lett. 86, 1110 (2001). 3. S. A. Maier, G. K. Pieter, A. A. Harry, M. Sheffer, H. Elad, E. K. Bruce, and A. G. R. Ari, “Local detection of electromagnetic energy transport below the diffraction limit in metal nanoparticle plasmon waveguides,” Nature Materials 2, 229 (2003). 4. D. S. Citrin, “Coherent excitation transport in metal-nanoparticle chains,” Nano Letters 4, 1561 (2004). 5. T. Zentgraf, A. Christ, J. Kuhl, and H. Giessen, “Tailoring the ultrafast dephasing of quasiparticles in metallic photonic crystals,” Phys. Rev. Lett. 93, 243901 (2004). 6. J. B. Pendry, “Negative refraction makes a perfect lens,” Phys. Rev. Lett. 85, 3966 (2000). 7. J. T. Shen, R. B. Catrysse, and S. Fan, “Mechanism for designing metallic metamaterials with a high index of refraction,” Phys. Rev. Lett. 94, 197401 (2005). 8. M. J. Lockyear, A. P. Hibbins, J. R. Sambles, and C. R. Lawrence, “Microwave transmission through a single subwavelength annular aperture in a metal plate,” Phys. Rev. Lett. 94, 193902 (2005). 9. J. B. Pendry, L. Martin-Moreno, and F. J. Garcia-Vidal, “Mimicking surface plasmons with structured surfaces,” Science 305, 847 (2004). #9853 $15.00 USD Received 2 December 2005; revised 16 January 2006; accepted 18 January 2006 (C) 2006 OSA 6 February 2006 / Vol. 14, No. 3 / OPTICS EXPRESS 1253 10. F. J. Garcia-Vidal, E. Moreno, J. A. Porto, and L. Martin-Moreno, “Transmission of light through a single rectangular hole,” Phys. Rev. Lett. 95, 103901 (2005). 11. A. Nahata, and H. Cao, “Influence of aperture shape on the transmission properties of a periodic array of subwavelength apertures,” Opt. Express 12, 3664 (2004), http://www.opticsexpress.org/abstract.cfm?URI=OPEX-12-16-3664 12. Y. Takakura, “Optical resonance in a narrow slit in a thick metallic screen,” Phys. Rev. Lett. 86, 5601 (2001). 13. F. Yang, and J. R. Sambles, “Resonant transmission of microwaves through a narrow metallic slit,” Phys. Rev. Lett. 89, 063901 (2002). 14. D. Qu, D. Grischkowsky, and W. Zhang, “Terahertz transmission properties of thin, subwavelength metallic hole arrays,” Opt. Lett. 29, 896 (2004). 15. M. Tanaka, F. Miyamaru, M. Hangyo, T. Tanaka, M. Akazawa, and E. Sano, “Effect of a thin dielectric layer on terahertz transmission characteristics for metal hole arrays,” Opt. Lett. 30, 1210 (2005). 16. J. A. Porto, F. J. Garicia-Vidal, and J. B. Pendry, “Transmission resonances on metallic gratings with very narrow slits,” Phys. Rev. Lett. 83, 2845 (1999). 17. S. Astilean, R. Lalanne, and M. Palamaru, “Light transmission through metallic channels much smaller than the wavelength,” Opt. Commun. 175, 265 (2000). 18. M. M. J. Treacy, “Dynamical diffraction explanation of the anomalous transmission of light through metallic gratings,” Phys. Rev. B 66, 195105 (2002). 19. F. J. Garcia-Vidal, and L. Martin-Moreno, “Transmission and focusing of light in one-dimensional periodically nanostructured metals,” Phys. Rev. B 66, 155412 (2002). 20. F. J. Garcia de Abajo, G. Gomez-Santos, L. A. Blanco, A. G. Borisov, and S. V. Shabanov, “Tunneling mechanism of light transmission through metallic films,” Phys. Rev. Lett. 95, 067403 (2005). 21. L. M. Moreno and F. J. García-Vidal, "Optical transmission through circular hole arrays in optically thick metal films," Opt. Express 12, 3619-3628 (2004), http://www.opticsexpress.org/abstract.cfm?URI=OPEX-12-16-3619 22. F. J. Garcia de Abajo, R. Gomez-Medina, and J. J. Saenz, “Full transmission through perfect conductor subwavelength hole arrays,” Phys. Rev. E 72, 016608 (2005). 23. L. Martin-Moreno, F. J. Garcia-Vidal, H. J. Lezec, K. M. Pellerin, T. Thio, J. B. Pendry, and T. W. Ebbesen, “Theory of extraordinary optical transmission through subwavelength hole arrays,” Phys. Rev. Lett. 86, 1114 (2001). 24. A. Degiron, and T. W. Ebbesen, “The role of localized surface plasmon modes in the enhanced transmission of periodic subwavelength apertures,” J. Opt. A: Pure Appl. Opt. 7, S90 (2005). 25. K. J. K. Koerkamp, S. Enoch, F. B. Segerink, N. F. van Hulst, and L. Kuipers, “Strong influence of hole shape on extraordinary transmission through periodic arrays of subwavelength holes,” Phys. Rev. Lett. 92, 183901 (2004). 26. R. Gordon, and A. G. Brolo, “Increased cut-off wavelength for a subwavelength hole in a real metal,” Opt. Express 13, 1933-1938 (2005), http://www.opticsinfobase.org/abstract.cfm?URI=oe-13-6-1933 27. H. Shin, P. B. Catrysse, and S. Fan, “Effect of the plasmonic dispersion relation on the transmission properties of subwavelength cylindrical holes,” Phys. Rev. B 72, 085436 (2005). 28. W. Wen, L. Zhou, B. Hou, C. T. Chan, and P. Sheng, “Resonant transmission of microwaves through subwavelength fractal slits in a metallic plate,” Phys. Rev. B 72, 153406 (2005). 29. J. Dintinger, S. Klein, F. Bustos, W. L. Barnes, and T. W. Ebbesen, “Strong coupling between surface plasmon-polaritons and organic molecules in subwavelength hole arrays,” Phys. Rev. B 71, 035424 (2005). 30. R. Gordon, A. G. Brolo, A. McKinnon, A. Rajora, B. Leathem, and K. L. Kavanagh, “Strong polarization in the optical transmission through elliptical nanohole arrays,” Phys. Rev. Lett. 92, 037401 (2004). 31. H. Lochbihler, and R. Depine, “Highly conducting wire gratings in the resonance region,” Appl. Opt. 32, 3459 (1993).


Experiments and theory
The terahertz transmission filters have been manufactured by perforating metal films, commercial aluminum foil with a 17μm thickness, with various geometric shapes using femtosecond laser machining. The period is set at 400 μm and the sample size is 2 cm by 2 cm. Figure 1(a) shows images of the plasmonic structures perforated with various shapes: square, circular, rectangular, c-shaped, and epsilon-shaped holes. Terahertz time domain spectroscopy [ Fig. 1(b)] is performed to obtain transmittance in the frequency range of 50 GHz to 2 THz, from comparing time traces of pulses before and after passing through the sample. In the inset, Fig. 1(c), time traces for the incident beam, the transmitted beam after a circular hole sample, and the beam after another nearly identical sample is shown. From the single cycle incident pulse, quasi-monochromatic waves are generated after passing through the sample, and become even more monochromatic after passing through the second sample.
Transmittance is plotted in Fig. 1(c), where the peak transmittance is near unity for both cases although the line width is narrower after passing through two samples. The peak position of 0.54 THz is determined by combined effects of both the periodicity and the circle diameter, which makes precise prediction of the transmission frequency, which has important technological implications, rather difficult. In the following, we show cases where one can easily predict perfect transmission position.
corresponds to the first Rayleigh minimum for normal incidence: in transmission grating at an incidence angle θ, first order diffracted waves graze at the sample surface at , taking away energies from the 0 th order transmitted wave.
With increasing b , the peak position shifts toward smaller frequency while maintaining transmittance of near unity. Interesting case is seen at the slit sample ( b = infinity), where the transmittance keeps increasing with decreasing frequency, until at the low frequency limit of our detection method (50 GHz), over 90% transmittance is seen. Our results suggest that the first shape resonance (the half wavelength mode along the length) is where the transmittance of unity occurs. Plotting spectral peaks versus the half wavelength mode cut-off frequency b c 2 shows that it is indeed close to a straight line of slope one [ Fig. 2 although it bows toward lower frequency as the peak position approaches R f much like an anti-crossing. This is expected, because at frequency R f or higher, first diffraction inevitably takes energy away from the 0 th order transmitted beam.
We analytically calculate transmittance through periodic arrays of rectangle holes with width a along the x-direction and length b along the y-direction, with periods x d and y d respectively. With the assumption that the metal is a perfect conductor, an excellent approximation in the terahertz range, we obtain an exact solution. Boundary matching between cavity mode expansion inside the holes and Rayleigh expansion outside the holes [31] result in the following zeroth order transmittance for the x-polarization: where k is the wave vector of the incident light and μ is the waveguide vector, W is a self-illumination term [10] describing coupling of the holeeigenmodes with the incident wave: In addition, electric field profile inside the rectangular hole indeed is close to that of the half wavelength mode (not shown). Since the lowest shape resonance frequency is determined by the rectangular dimension in the direction perpendicular to the polarization, we expect that when we rotate the sample by 90 degrees, the shape resonance frequency switches from b c 2 to a c 2 . Figure 2 Transmission spectra shown in Figs. 1 and 2 have been taken at normal incidence. In many applications, an incident-angle independent filter would be much desired. Our shape resonance filter with rectangular hole shape has exactly this property. Shown in Fig. 3(a) is a contour plot of angle dependent transmission spectra, for an array of strongly rectangular shaped holes with width to length ratio of 1 to 8. The transmission peak is completely independent of incident angle and lies very close in frequency to the half wavelength mode. This angle independence is essentially because the half wavelength mode cut-off b c 2 =0.24 THz and the first Rayleigh minima are far from each other in the range of angles investigated, so that only the length b, not the period d is important in determining the transmission maximum. As the length becomes shorter all the way to square shape holes, shape resonance and Rayleigh minima interact with each other to generate surface plasmon-like, angledependent transmission peaks, which lies below the Rayleigh minima line much like in the visible range [ Fig. 3(b)]. We now show that a dual or multiple frequency filter can be made simply by choosing an asymmetric hole shape. Readily available multiple frequency filters may find applications in selecting signature frequencies, while rejecting the background. In symmetrical shapes such as circles, rectangles, and squares, it seems clear that the fundamental, lowest frequency resonance determines the dominant transparency frequency, together with a smaller effect of the period d . For more complex c-and epsilon-shaped structures, more than one frequencies support strong transmission. Figure 3(c) shows dual resonance, one near unity at 0.28 THz and the other over 80% at 0.70 THz at horizontal polarization (Blue line), in contrast for vertical polarization (Red line), which shows a predominant peak at 0.62 THz. The near-unity transmission at 0.28 THz for horizontal polarization can be thought of as corresponding to the 'half-wavelength' mode of the entire length l along the c-shape, and is consistent with the result on a rectangle sample with the same length, l =590 μm. The second peak at 0.70 THz, slightly below R f , is due to the combined effects of another, higher frequency shape resonance and the periodicity, as is clear from the angle dependence shown in Fig. 3(d): while the lower frequency transmission peak position is completely angle-independent, the higher transmission peak sees the period. It is clear that l along the shape is an important parameter in determining the shape resonance positions and therefore the peak positions. We now investigate an epsilon shaped hole sample, which has a longer l=703 μm and therefore smaller shape resonance frequencies.
The transmission Fig. 3(e) shows that even the higher frequency peak is essentially angleindependent, making this an angle independent dual frequency filter. This is because the longer l makes both transmission peaks at 0.58 THz and 0.26 THz to be sufficiently removed from R f . Transmission properties of such asymmetric shapes offer us the possibility of multiresonances which can be designed by proper combination of shape resonances and the crossings of Rayleigh lines. Asymmetric structure consisted of rectangular holes with three different lengths shows four dominant resonances [ Fig. 3(f)]. The crossings of Rayleigh lines appear as transmission minima at 0.78 and 0.25 THz, where the former is caused by the period of 390 and the latter the super-period, 1170. These two minima, particularly the first Rayleigh minimum interfere with three fundamental shape resonances for each rectangle, apparently resulting in four transmission peaks. This interference of Rayleigh minima with shape resonances gives yet another means of tailoring transmission spectra for the desired multiple frequency peaks.

Conclusion
We have demonstrated that near-unity transmittance is obtained at desired terahertz frequencies in plasmonic metamaterials through the shape resonance. Strong transmission peaks, single, dual, and multiple, result by designing various shape holes, combined with the Rayleigh minima. Our results also show that plasmonic metamaterials with different geometric shaped holes are extremely versatile, dependable, easy to control and easy to make terahertz filters. In particular, angle dependent transmission spectra for square, rectangle, cand epsilon-shaped holes show an omni-directional property when the fundamental shape resonance is far away from the Rayleigh minima. We believe that our work could be particularly useful as multiple-color filters to select incommensurate signature frequencies in terahertz and infrared regime where coating is impractical and, in contrast to Fabry-Perot filters where integer-multiple frequencies always transmit even when undesired.