Optimization Technique of Aeroengine Rotor AssemblyChinese Full Text
LIU Jun;WU Fa-yong;WANG Juan;PLA Consumer Representative Office in SLEMC;AVIC Shenyang Engine Design and Research Institute;
Abstract: The primary unbalance and concentricity of rotor were controlled by optimizing the fixing angle between the adjacent parts.The bounce measurement based on rotor was illustrated,and the deviation between the axis of rotation and the principal axis of inertia was calculated to estimate the rotor unbalance and concentricity.Two optimization principles of rotor unbalance and concentricity were proposed,and the random assembly process,and one or two optimize assembly process was simulated by Montle Carlo method.The verification shows that the rotor optimization assembly technique can improve the rotor assembly quality.
- DOI：
10.13477/j.cnki.aeroengine.2014.03.016
- Series：
- Subject：
- Classification Code：
V263.2
- Mobile Reading
Read on your phone instantly
Step 1Scan QR Codes
"Mobile CNKI-CNKI Express" App
Step 2Open“CNKI Express”
and click the scan icon in the upper left corner of the homepage.
Step 3
Scan QR Codes
Read this article on your phone.
- HTML
- CAJ Download
- PDF Download
Download the mobile appuse the app to scan this coderead the article.
Tips: Please download CAJViewer to view CAJ format full text.
Download: 813 Page: 75-78 Pagecount: 4 Size: 140K
Citation Network
Related Literature
- Similar Article
- Reader Recommendation
- Associated Author