Evaluation of Antioxidant Activities of Rosemary ( Rosmarinus officinalis L.) Essential Oil and Different Types of Solvent Extractions

The evaluation of the antioxidant activity of different solvents of rosemary extract would involve testing the efficacy of various solvents in extracting antioxidants. This can be done by measuring the antioxidant capacity of the extracts using different assays. The solvent that results in the highest antioxidant activity can then be considered the most effective for extraction purposes. This study examined the effects of several solvents on the extract of rosemary leaves, including its total phenolic content, total flavonoid content, total tannin content, and antioxidant activity. Six different in-vitro methods DPPH, ABTS, FRAP, ferric reducing power, total antioxidant activity, and nitric oxide (NO) radical scavenging—were used for the antioxidant activity assessment. The TPC, TFC, TTC, and antioxidant capacity were all highly and considerably impacted by the extraction solvents. In general, the maximum TPC (72.34 GAE mg/g) and TFC (26.81 RE mg/g) were found in the ethanol extract. while aqueous extract had the highest TTA value (20.25 GAE mg/g). In the NO radical scavenging assay (86.68 RE mg/g) and DPPH (138.3 GAE mg/g) assays, methanol extract exhibited the best antioxidant activity, the aqueous extract had the highest activity in ABTS (125.33 TE mg/g), and ferric reducing power (144.5 AScE mg/g), in comparison, ethanol extract had the highest activity in FRAP (130.5 AScE mg/g) and total antioxidant activity (178.86 GAE mg/g) of rosemary leaves, also methanol extract shown the highest antibacterial activity. In addition, R 2 (The coefficient of determination) values established a significant correlation between the phytochemical content and all antioxidant methods utilized. The highest R 2 value was between FRAP assay and TPC and TFC, (0.8814), (0.9878) respectively, as DPPH with the TTC (0.923). R 2 values also proved a strong correlation between antioxidant methods used, where the highest R 2 was between frap and ferric reducing power (0.8985), and the lowest between DPPH and total antioxidant activity (0.5337).

Rosmarinus officinalis L. a fragrant perennial shrub with needle-like leaves, belongs to the mint family (Lamiaceae) and is popularly known as rosemary.It is indigenous to the Mediterranean and certain parts of Asia, but because of its ornamental value, culinary applications, and usage in traditional medicine, it has lately spread to wide regions.Many studies have demonstrated the antioxidant qualities of rosemary extract, which is why it's utilized in food as a natural antioxidant as well as an outstanding taste element 1,2 .Reports suggest that rosemary extract may help prevent oil from oxidizing [2][3][4][5][6] .Due to the widespread need for more natural antioxidants, there has been a lot of activity in the quest for novel natural substances to limit or replace synthetic compounds.Numerous scientific researchers have examined the chemical makeup and biological properties of rosemary for a variety of reasons.These include the plant's historical usage in medicine and its abundance of biological secondary metabolites and phytochemicals.It helps to explain why rosemary is known as a traditional medicinal herb.research conducted on rosemary as the number of plants grew over time due to the development of more advanced analytical techniques.Nowadays, one of the most popular fragrant and medicinal herbs utilized worldwide is rosemary.The majority of the explanation for its relevance was the abundance of bioactive compounds it contained.Within rosemary leaves, the most significant antioxidant polyphenolic components are carnosic acid, rosmarinic acid, and related stable compounds such as romano, carnosol, epirosmanol, and 7-metylepirosmanol [7][8][9] .
The high concentration of hydroxyl groups that form a unique spatial arrangement in flavonoids, and that inhibit the oxidation of lipids and eliminate reactive substances like superoxide, hydroxyl, and alkoxy radicals, may be the cause of the antioxidant properties of polyphenol compounds and flavonoids, which act as scavengers for free radicals.They also play a critical role in avoiding atherosclerosis and thrombosis by reducing the permeability of capillaries and fragility and inhibiting platelet aggregation.Additionally, since they can assist certain carcinogens in exiting cells and activate enzymes that detoxify, phenolic compounds may have anticarcinogenic properties 10 .One of the herbs with the greatest antioxidant properties is the herb rosemary 7 , which is also a highly significant supply of polyphenols 11 .Rosemary has been employed in the culinary, cosmetics, traditional medicine, and chemical industries 12,13 .
Evaluating plant extracts' antioxidant potential is crucial since they may include a variety of antioxidant components that depend on the characteristics of the solvent employed in the extraction process, Various components from the rosemary can be extracted by various solvents, which will have varying effects on the antioxidant activity.For instance, phenolic chemicals, which are primarily responsible for rosemary's antioxidant properties, may be effectively extracted using methanol 14 .Conversely, extractions made with water are expected to tend to be less active as antioxidants than extractions made using organic solvents like methanol and ethanol.It is crucial to remember that the particular goals of the investigation and the intended result should guide the choice of solvent.
The assessment of the properties exhibited by extracts that utilize varied plant components should be based on the findings acquired using the same experimental circumstances.
Additionally, the variations in the chemical makeup and bioactive compounds found in plants are mostly determined by the section of the plant that is utilized, the region from where the plant originated, and the time of year the plant was harvested 15 .Due to its ability to stop normal microbes such as staphylococcus epidermidis, pseudomonas aeroginosa, and some yeast like candida albican from oxidizing fatty acid cellular protein and lipoprotein, rosemary extract and essential oil have been used in numerous trials for more than 20 years in food and cosmetic products.The kind of solvent utilized for extracting this plant dictates the quantity and quality of phytochemicals that will be extracted; in other words, the solvent's polarity controls what phytochemicals will be extracted.
It is preferable to assess the antioxidant activity of many extracts using a variety of assays and techniques since this will reveal various features of an extract with varying antioxidant activities.
By using free radical scavenging assays, the DPPH, ABTS+, also, FRAP, ferric reducing power, and TAA, in addition to NO radical scavenging, this work aims to determine the effect of the type of solvent used to extract rosemary complex matrices on the antioxidant activities by using many techniques.

Plant extraction
In May 2023, fresh rosemary leaves were gathered from several plants from the Mutah University campus in Al-Karak, south Jordan.The used portions were taken out, dried in the shade for ten days, and ground, (Moulinex Miller, France).A total of 100 milliliters of various solvents were used to extract 20 grams of powdered powder.The mixtures were combined for sixteen hours at room temperature on a rotating shaking device, spinning at 150 rpm.After that, they were placed in an ultrasonic bath set at 37 °C for fifteen minutes.After passing through What Man number 4, the mixes were passed via a syringe microfilter (0.45 ìm).Applying the Büchi, RE 121, rotary evaporator, for removing solvents under decreased pressure at 38 ºC, 120 rpm, crude extracts were produced.After the solvent evaporated, the dry solid residue, which will be utilized for further analysis was kept at 4 °C until.

essential oil extraction
The experimental configuration for steam distillation of volatile oils of rosemary leaves Wellmaintained fresh leaves were properly cleaned and allowed to air dry at room temperature 16 .The leaves were weighed after being cut into tiny pieces.Using Clevenger-type equipment, a 150 g sample was steam-distilled for a minimum of six hours in total at atmospheric pressure (101.325kPa).Dichloromethane was used to extract the distillate, or aqueous phase.Using a rotary evaporator, the organic phase was dried over anhydrous sodium sulfate, filtered, and the solvent was separated from the oil.Before being employed, obtained essential oils were kept at 4 °C.

Phytochemical content determination determination of total phenolic compounds (tPc)
The reagent of the Folin and Ciocalteu (FC) colorimetric technique from 17 was used to calculate TPCs.Using a vortex, an aliquot (125 microliters) of the sample or the standard utilized was the gallic acid solution was thoroughly mixed with 0.5 milliliters of deionized water and 125 microliters of FC reagent.After six minutes of reaction, 1.25 mL of a 7% Na 2 CO 3 solution had been added and thoroughly mixed.Deionized water was added to the final amount until it reached 3.0 mL.Using a HITACHI U-5100 UV-VIS spectrophotometer.After a 90-minute incubation time at the ambient temperature without light, the absorbance of the solution was measured at 760 nm.Gallic acid equivalents (GAE) in milligrams per gram of rosemary extract were used to express the results.Every determination was made three times.total Flavonoid content determination Zhishen et al. (1999)  18 reported that the total flavonoid quantity in RE was ascertained by mixing 0.5 ml of each RE solution with 0.3 milliliters of 5 grams per liter sodium nitrite (Labchem, USA).After five minutes, one gram of chloride of aluminum (Labchem, USA) per liter, or 0.3 ml, was added.Two ml of 1M sodium hydroxide solution were added to the liquid after the six-minute mark.With distilled water, the entire volume was increased to 10 ml, and right away after preparation, the mixture was sonicated.HITACHI U-5100 UV-VIS spectrophotometer was used to measure the absorbance at 510 nm against a water blank.To create the calibration curve, rutin solution (0-200 µg/ml) was obtained from Sigma-Aldrich, USA.The concentrations were given in mg of rutin equivalent/g of dry extract.

total tannin content determination
Total tannin content was measured using the Folin and Ciocalteu method 19 , in which 0.5 ml of the Folin phenol reagent, 7.5 ml of distilled water, 1 ml of 35% (w/v) sodium carbonate solution, and 0.1 ml of each RE solution were added.The mixture was then diluted to 10 ml with distilled water.After giving the mixture a thorough shake and letting it sit at the ambient temperature for half an hour, at 725 nm, the absorbance was measured using a HITACHI U-5100 UV-VIS spectrophotometer.Blank was prepared using water instead of the sample.The previously explained procedure was used to process several standard solutions of gallic acid, and its results were compared to a blank.The values of the tannins were expressed in milligrams of Gallic acid equivalent per gram of dry extract.

determination of rosemary essential oil chemical content
The chemical content of essential oil of rosemary leaves was investigated using Gas Chromatography-Mass spectrometry (GCMS) 16 .This was performed using an instrument of Shimadzu qp2010 Plus, a DB5-SMS column (30m X 0.25 mm x 0.25 cm), and helium (He) as a mobile phase.The maximum temperature was programmed to reach 290°C within 15 min while the initial temperature was held at 50C for 5 min and it was operated to increase at a rate of 4°C per minute.Both the injector and transfer-line temperatures were set at 250°C.Electron ionization was the mode used in the MS with a 70-electron volt (eV) electron energy and a 250°C ion source temperature.The characterization of the eluted peaks was confirmed based on the retention time and the linear index of standard alkane compounds (C8-C20).Also, the MS spectra of the possible identified compounds were compared with their analogs in the NIST library and published data.Indeed, co-chromatography was performed for certain compounds under similar circumstances.determination of antioxidant activity of rosemary leaf extract dPPh radical scavenging activity U s i n g 1 , 1 -d i p h e n y l -2 -p i c r y lhydrazyl (DPPH) (Sigma-Aldrich, USA), Al Tarawneh (2022) methodology 20 was utilized to evaluate the DPPH scavenging actions of RE. 1.9 ml of 0.1 mM DPPH methanol solution was combined with 0.1 ml of different concentrations of RE.After giving the mixture a good shake and letting it at room temperature for thirty minutes, then at 517 nm, by utilizing the HITACHI U-5100 UV-VIS spectrophotometer, to get the absorbance against a blank.Positive controls included Gallic acid from Sigma-Aldrich in the USA.The following formula was utilized to compute the degree of DPPH radical scavenging activity: The DPPH radical scavenging activity=[(control abs-sample abs)/(control abs)]*100 aBts radical scavenging activity Re and colleagues (1999) 21 reported that 7 mM of ABTS was produced in water.(ABTS •+ ) was produced by reacting an ABTS solution with a potassium persulfate solution that had a final concentration of 2.45 mM.The mixture was then let to stand at room temperature in the dark for 16 hours before use.Following the addition of twenty microliters of rosemary samples, and trolox (standard) at varying concentrations, solvent (control), and two milliliters of dilute ABTS •+ solution (Abs at 734 nm = 0.700 ± 0.020).
The absorbance measurement was obtained precisely half an hour later.At least three attempts were made at each determination.the percentage that inhibits absorbance at 734 nm was computed.

FraP assay
With a few modest modifications, the FRAP activity was calculated by Benzie and Strain 22 .The plant extract was mixed in a ratio of 1:10:1 (v/v/v) with ten mmol per liter TPTZ solution in Forty mmol/L HCl, three hundred mmol per litter acetate buffer solutions (pH 3.6), and 20 mmol/L solution of FeCl3 to create three milliliters of the FRAP reagent.Utilizing a HITACHI U-5100 UV-VIS spectrophotometer, After the reaction was allowed to continue for ten minutes at room temperature, the absorbance was determined at 593 nm.Fe 3+ /Fe 2+ reducing power assay Pulido's method 23 was applied with a few minor adjustments to evaluate the ferric reduction capability of rosemary extracts.Ten milligrams per milliliter of Potassium ferricyanide and 0.2 M, pH 6.6 of phosphate buffer were combined with two milliliters (ml) of rosemary extracts.Following a 20-minute incubation period at 50°C, 2 milliliters of trichloroacetic acid (C 2 HCl 3 O 2 ) (100 mg/l) had been added to the mixture.The mixture was then centrifuged for 10 minutes at 3000 rpm, and the top layer was carefully removed.Precisely two milliliters of each of the solution mixes previously disclosed were combined with two milliliters of distilled water and 0.4 milliliters of fresh ferric chloride at a concentration of 0.1% (w/v).Following a 10-minute reaction incubation period at room temperature as well, the absorbance at 700 nm was determined by a HITACHI U-5100 UV-VIS spectrophotometer.As a control, ascorbic acid was employed.A stronger reducing effectiveness of the reaction's solution is shown by higher absorbance readings. 24.A volume of one milliliter of the reagent solution (0.6 M sulphuric acid, 28 millimolar sodium phosphate as well as 4 millimolar ammonium molybdate) was mixed with about 0.1 ml of each of the plant extract samples.The mixture was placed in tubes, coated with silver foil, and incubated for ninety minutes at ninety-five Celsius degrees in a water bath.After that, the mixture was permitted to cool to room temperature.At 765 nm, the absorbance of the solutions was measured concerning a blank.using gallic acid as standard.Increased absorbance values suggested that the plant extracts had a greater potential for total antioxidants.nitric oxide (nO) radicals scavenging assay NO radical-scavenging activity assay The process was carried out using Parul's (2013) methodology 25 .Different amounts of dissolved rosemary extract in water were combined with ten millimolars of sodium nitroprusside in phosphatebuffered saline, and the mixture was incubated for 150 minutes at ambient temperature.Following the incubation period, the mixture was treated with 0.5 ml of Griess reagent, which included one percent of sulfanilamide, two percent of Phosphoric Acid, and 0.1 percent of N-(1-naphthyl) ethylenediamine dihydrochloride.At 546 nm, the absorbance chromophores were measured.As a positive and negative control, rutin and the identical reaction combination excluding rosemary extracts were used.

antibacterial activity Bacteria
A total of two gram-positive bacteria and seven gram-negative bacteria have been used in this test.Among these two standard bacteria are Escherichia coli (ATCC 25922) and Pseudomonas aeruginosa (ATCC 10145).The other species were clinically isolated and identified based on the morphological and biochemical standard method.These bacteria are Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumonia, Enterobacter aerogenes, Proteus mirabilis as gram negative bacteria, and Staphylococcus aureus, and Staphylococcus epidermidis as gram positive bacteria.The identification was confirmed to species level using the Biomérieux VITEK® 2 system.

disc diffusion method
Using the disc diffusion technique, rosemary extracts' antibacterial efficacy has been assessed 16 .Briefly, a Muller-Hinton agar plate was inoculated with 100 µL of 24h old bacterial culture (containing 1×10 8 CFU/mL).Using the spreading culture technique, the bacteria were spread over the surface of the agar using a glass spreader.Then, a disc containing 10 mg of the extracts was transferred to the inoculated agar.The prepared plates were incubated for 24h at 37°C.Then, the millimeters of the formed inhibitory zones were measured.

Minimum inhibitory concentration (Mic)
The assay was determined using a 96-well plate 16 .The extracts were prepared in two-fold dilution using Muller-Hinton broth to produce concentrations of 5, 2.5, 1.25, 0.6, 0.3, 0.15, 0.08, 0.04, 0.02, and 0.01 mg/mL.Test wells containing broth media without extract were also prepared as a positive control.Then, 10 µL of 24 h-old bacterial culture (containing 1X108 CFU/mL) was added to each test well.The prepared plates were incubated for 24h at 37°C.The minimum inhibitory concentration (MIC) of the extracts that stopped the bacteria's observable growth was recorded.

statistical analysis
For every test, the results from at least three replications were presented as means ± standard deviation (SD).Microsoft Excel 2016 was utilized for statistical analysis to calculate the R 2 values to connect TPC, TFC, and TTC with different antioxidant activity methods and between antioxidant activity methods themselves.

Phytochemical content
Phenolic compounds' chemical structure and redox characteristics, which enable them to function as hydrogen donors and reducing agents for transitional metals, scavenging free radicals, and inhibiting lipoxygenase, are the primary mechanisms behind their antioxidant action.Total polyphenols in the samples were measured using the FC reagent 26,27 .The Folin-Ciocalteu reagent was included in this investigation to assess the quantity of phenolic substances.Gallic acid was used in the construction of the standard curve.The ethanol extraction displayed the highest total phenolic content value (72.34 ±4.9 GAE mg/g), followed by slightly less antioxidant activity, methanol (64.44 ±6.6 GAE mg/g), acetone (57.74 ±7.9 GAE mg/g), ethyl acetate (52.04 ±3.8 GAE mg/g), aqueous (48.94 ±5.5GAE mg/g), diethyl ether (37.34 ±6.9 GAE mg/g).Subsequently, Overall, the essential oil extraction had the lowest antioxidant activity (9.9±0.06GAE mg/g).According to Table 1, they had the lowest total phenolic contents.The capacity of flavonoids to eliminate and prevent the production of free radicals accounts for their antioxidant action.Numerous research has examined flavonoids' ability to function as antioxidants in vitro in recent years, and significant structure-activity connections of their antioxidant properties have been identified 28 .Flavonoids have a broad range of actions, such as chelating metal, reducing the enzymes linked to the production of free radicals, and boosting the body's antioxidant enzymes.The ethanol extraction displayed the highest flavonoid content value (26.81 ± 0.58 TE mg/g), followed by methanol (25.45 ±0.27 TE mg/g), aqueous (25.37 ±0.1 TE mg/g), ethyl acetate Tannins are complex substances that typically appear as mixtures of polyphenols that may be extremely hard to separate due to they seldom crystallize.Antioxidant properties are because of the accumulation of the OH group on small-size nuclei, these agents have an antioxidant nature 29 .The methanol extraction displayed the highest tannins content value (20.25 ±2.35 GAE mg/g), followed by slightly less antioxidant activity, ethanol (19.55 ±0.05 GAE mg/g), acetone (17.45 ±0.15 GAE mg/g), aqueous (17.3 ±1.3 GAE mg/g), ethyl acetate (14.45 ±0.45GAE mg/g), and, diethyl ether (12.65 ±0.75 GAE mg/g).Also, the essential oil extraction had the lowest total tannin content (7.5 ± 0.5 GAE mg/g) in Table 1.

antioxidant activity dPPh radical scavenging activity
In the model system, the radical DPPH is frequently utilized to assess antioxidant activity quickly.The capacity of the phytochemicals to give hydrogen, that scavenges the DPPH radical, provides the basis for DPPH scavenging action.When a DPPH solution is combined with an element that may supply an electron or a hydrogen atom to DPPH, neutralizing its free radical properties, the resulting reduced form of DPPH (non-radical) loses its violet hue.As the fraction of free radical inhibition rises, so does the radical scavenging activity 30 .The stable radical DPPH's absorbance decreased and its hue changed from purple to yellow at varying doses.According to the research findings, the extraction of methanol exhibited the greatest DPPH scavenging activity (81.75±0.23)% at a Gallic acid equivalent concentration equal to (138.3±12.7 mg/g GAE), while the lowest scavenging value was essential oil extraction (14.13±0.03)% at (28.9±2.26mg/g GAE), as presented in figure 1.For other extractions, the scavenging activity was as follows diethyl ether (100.3±8.57mg/g GAE), ethanol (106.64±6.44 mg/g GAE), acetone (92±6.42mg/g GAE), and finally, ethyl acetate (78.14±7.24mg/g GAE).The highest correlation was with total tannin content as phytochemical content, where (R 2 = 0.923).also, the correlation with FRAP is the highest (R 2 = 0.8672), in contrast to alternative techniques for measuring antioxidant activity, as indicated in Table 3.

aBts radical scavenging activity
The reaction that occurs involving a natural antioxidant and the pre-generated ABTS •+ radicals cation forms the foundation of the ABTS •+ test.A simple quantitative method for detecting ABTS •+ scavenging is the bleaching of typical peaks in the absorption spectrum.A day in advance, ABTS •+ is often prepared by combining potassium persulfate and ABTS •+ and letting them stand for 12 to 16 hours.This allows the potassium persulfate to oxidize ABTS •+ stoichiometrically, forming ABTS •+ , which is easily distinguished by a color shift from almost colorless to a deep bluish-green.The extractions' antioxidant activity matched those of Trolox, the industry-standard antioxidant.When compared to trolox, the polar extraction in our investigation exhibited the strongest antioxidant activity, while the non-polar extraction had the lowest scavenging activity.The results shown in Figure 2, were the aqueous extraction (125.33±TE mg/g) followed by acetone (119.33±TE mg/g), methanol (108.75±TE mg/g), ethanol (98.51±TE mg/g), ethyl acetate (93.25±TE mg/g), and diethyl ether (76.37±TE mg/g), the lowest scavenging activity was for essential oil (32.67±TE mg/g).Table 3 shows that the highest correlation was with total flavonoid content as phytochemical content, where (R 2 = 0.8345).also, the correlation with FTRP is the highest (R 2 = 0.8856), in contrast to alternative techniques for measuring antioxidant activity, as indicated in Table 3.According to Hou (2016) 31 , flavonoids possessing certain structural and hydroxyl positions within their molecules can donate protons and exhibit radical scavenging properties.

Ferric reducing antioxidant power assay (FraP)
The FRAP test is a good, quick, and low-cost method that calculates a sample's total antioxidant levels by considering its oxidationreduction potential.The FRAP technique gauges a plasma's capacity to reduce ferric iron.It reacts to the ferric tripyridyltriazine complex by using the antioxidants' reducing potential to create the intensely blue ferrous tripyridyltriazine complex 32 .If an antioxidant, or reductant, is present, the reaction circumstances will favor the complex's reduction and the subsequent production of color.Among all the rosemary extractions, the ethanol extraction showed the highest FRAP value (130.5±6.93AScE mg/g), while, further extractions in decreasing pattern (figure 3 3).In general, the highest correlation values were for FRAP with total phenolic content (R 2 = 0.8814), and total flavonoid content (R 2 = 0.9878), when correlated with phytochemical contents, while correlated with other antioxidant assays, also, Table 3 shows that the highest correlation was with FTRP is the highest (R 2 = 0.8985), in contrast to alternative techniques for antioxidant activity assays.Typically, Chemicals that have the ability to reduce are often associated with the transfer of a hydrogen atom, which breaks the chain of free radicals 33 .The FRAP test of rosemary extract was determined to be 1186.54ìm Fe (II) /g by Teruel (2015) 34 .

Ferric reducing Power assay (FrPa)
Based on the idea that substances with reduction potential combine with potassium ferricyanide (Fe 3+ ) to make potassium ferrocyanide (Fe 2+ ), which then interacts with ferric chloride to generate the ferric-ferrous complex, which has an absorption maximum at 700 nm, the test procedure is carried out 35 .Among all the rosemary extractions, the aqueous extraction (144.5±9.81GAE mg/g) showed the highest reducing power value and other extractions in the decreasing order, figure 4, i.e., ethanol extraction (129.1±11.45GAE mg/g), methanol (114.3±12.36GAE mg/g), ethyl acetate extraction (92.26 ±6.49GAE mg/g), acetone (111.57±8.68GAE mg/g), and diethyl ether (78.43±9.91GAE mg/g).According to results obtained in this study, antioxidant tests, the aqueous extraction in this study had the maximum ferric reducing potential, whereas the essential oil had the lowest ferric reducing potential (29.21±1.27GAE mg/g).Table 3 shows that the highest correlation was with total flavonoid content as phytochemical content, where (R 2 = 0.8383).also, the correlation with FRAP is the highest (R 2 = 0.8985), in comparison with other methods for antioxidant activity assaying.

total antioxidant activity
All extractions' combined antioxidant activity was assessed spectrophotometrically using the phosphomolybdenum technique.The total antioxidant activity was determined using the phosphomolybdenum approach, which is based on the sample analyte's reduction of Mo (VI) to Mo (V) and its resulting creation of green phosphate Mo (V) complex under acidic pH.This test involves electron transfer, which is dependent on the antioxidant's structure 36 .In our investigation, when compared to Gallic acid, the polar extraction exhibited the strongest antioxidant activity, and the non-polar extraction was the lowest when it came to reducing Mo (VI) to Mo (V).The reference standard antioxidant, Gallic acid, was used to compare the antioxidant activity of the extractions.Figure 5 shows the highest total antioxidant activity value of 178.86 ±10.51 GAE mg/g, the ethanol extraction showed the greatest value, followed by the slightly fewer antioxidant methanol (163.25 ±8.72GAE mg/g), acetone (158.9±3.5 GAE mg/g), aqueous (157.8±7.52 GAE mg/g) ethyl acetate (156.7±10.51GAE mg/g), and then Essential oil (94.65±8.55GAE mg/g).while the diethyl ether extraction had the lowest total antioxidant activity (74.41±9.98GAE mg/g) This shows that the more polar extraction has higher polar component content and higher antioxidant activity than diethyl ether and essential oils.In general, the lowest correlation values were for TAA with all phytochemical contents, and when correlated with other antioxidant assays, Table 3 shows that the highest correlation was with total flavonoid content as phytochemical content, where (R 2 = 0.6812).also, the correlation with FTRP is the highest (R 2 = 0.5966), in comparison with other methods for antioxidant activity assay.These results were consistent with the study 32 , which indicated that the higher the solubility, the higher the activity.assay for scavenging radicals of nitric oxide (nO) The Ebrahimzadeh 37 methodology was utilized to ascertain the plant extracts' capacity to scavenge nitric oxide radicals.The Greiss reaction was used to detect the nitrite ions that are produced when oxygen combines with NO produced by sodium nitroprusside, or Extracts act as a scavenger of nitric oxide competed with oxygen, they lessen the quantity of nitrite that is produced when sodium nitroprusside is combined with oxygen and nitric oxide.The antioxidant capacity of the extractions was equivalent to that of the standard antioxidant, rutin.The Ebrahimzadeh 37 methodology was utilized to ascertain the plant extracts' capacity to scavenge nitric oxide radicals.Sodium nitroprusside was used to produce nitric oxide, which was then quantified using the Greiss reaction.The plant extracts inhibit nitric oxide synthase induction.They lessen the quantity of nitrite that is produced when sodium nitroprusside is combined with oxygen and nitric oxide.The methanol extraction displayed the highest total antioxidant activity value (86.08 ±6.4 RE mg/g), followed by slightly less antioxidant activity, ethanol (85.17 ±4.79 RE mg/g), aqueous (83.08 ± 6.41 RE mg/g), ethyl acetate (81.1 ±4.63 RE mg/g), essential oil (80.85 ±3.66 RE mg/g).and then acetone (78.59±5.38RE mg/g), while the diethyl ether extraction had the lowest total antioxidant activity (62.24±3.31RE mg/g) as shown in Figure 6.Table 3 shows that the highest correlation was with total tannin content as phytochemical content, where (R 2 = 0.8846).also, the correlation with FRAP is the highest (R 2 = 0.8841), in comparison with other methods for antioxidant activity assaying.

antibacterial activity
The antibacterial activity of ethanol, methanol, acetone, ethyl acetate, water, and the essential oil extracted from rosemary extract has been determined based on the inhibition zones and MIC values.The results of inhibition zones (Table 4) showed that all extracts exhibited antibacterial activity but to a variable degree.The inhibition zones observed for the methanol extract were higher than the inhibition zones of other extracts.The exception to this is the inhibition zones of ethanol and acetone extracts against P. mirabilis and S. aureus.The maximum inhibition zone observed was 21.8 mm for the methanol extract against E. coli, suggesting that the methanol extract possesses the maximum antibacterial activity.Ranked second is the ethanol extract, followed by acetone, water, ethyl acetate, and finally essential oil.However, the extracts demonstrated broad-spectrum antibacterial action against bacteria of both the gram-positive and gram-negative varieties.The most sensitive strains were E. coli, K. pneumoniae, E. coli ATCC 25922, and E. aerogenes, as indicated by the largest inhibition zones observed.
Quantity analysis to determine the antibacterial activity of the extracts has been determined using MIC.In general, the results of the inhibition zones were reflected in the values of MIC (Table 5).The extracts that exhibited the largest inhibition zones were those that exhibited the lowest MIC values.The lowest MIC value reported was 0.08 mg/mL for the methanol extract against E. coli.The MIC values of the methanol, ethanol, and acetone extracts at low concentrations ranging from 0.08 to 0.3 mg/mL indicate the effectiveness of these polar extracts as antibacterial agents.
In general, this study investigated how the antioxidant capacity was affected by the solvent used to extract the plant.We talked about many phytochemicals content like TPC, TFC, TTC, and several antioxidant activity assessment techniques for rosemary extracts.The antioxidant action of the plant may originate from the secondary metabolite present in the extract.Organic compounds known as secondary metabolites are mostly generated by plants and fungi.These are low-molecular-weight substances with a range of biological activities, including antioxidant and antibacterial qualities 38,39 .The plant extract's phytochemical screening result showed the existence of many secondary metabolites, which are what define the antioxidant action.In comparison to other solvent extracts, the ethanol extract of rosemary demonstrated superiority as a solvent for the extraction of several secondary metabolites.This examination, which also confirmed the results of the previous study 39 , revealed abundant amounts of phenols as well as flavonoids, alkaloids, terpenoids, glycosides, and several other extra metabolites in rosemary extract.Comparably, the ethanol extract of rosemary demonstrated favorable results for tannin, glycoside, flavonoids, and phenol.It has been demonstrated that secondary metabolites, in particular phenolic and flavonoids, have strong radical scavenging action, the secondary metabolite's bioactivity potential may be the cause of the plant extract's antioxidant activity 40,41 .Rosemary essential oil occurs in five different chemotypes: verbenone, myrcene, 1,8-cineole, a-pinene/1,8-cineole, and a-pinene/â-pinene chemotypes 42 .In this study, verbenone was the most dominant component, suggesting that this species is a verbenone chemotype.Hudaib (2015) 43 , showed that the essential oil of rosemary collected from Amman, Jordan, is a 1,8-cineole chemotype.It is worth mentioning that the presence and concentrations of these components are variable based on the plant growth conditions, such as the weather and the geographical area [44][45][46] .Antioxidant action is exhibited by flavonoids, phenolic substances found in medicinal plants 41 .Alkaloids, flavonoids, and terpenes are examples of phytochemicals that are important for their antibacterial, analgesic, neuroprotective, and antioxidant properties 39,40 .They also function as antidiabetic and anticancer agents 47 .Since flavonoids, phenols, terpenoids, tannins, and saponins are some of the primary phytochemicals present in plant extracts, the results of the phytochemical screening procedure may generally provide prospective therapeutic applications 40 .Numerous parameters, such as the amount of sample, conditions of storage, weather, extraction process, availability of any interfering chemicals, and solvent, might affect the effective screening of compounds that are phenolic or flavonoid 39,41 .However, it hasn't been demonstrated that any one solvent or combination of solvents may successfully extract phenolic chemicals from various solvent extracts.The hydroxyl groups in phenols are remarkably effective in scavenging free radicals.Conversely, flavonoids are physiologically significant substances that exhibit a wide range of biological properties, including anti-inflammatory, anti-cancer, anti-allergic, anti-angiogenic, and antioxidant properties 40 .Moreover, a maturation period, geographic location, extraction technique, or extraction solvent may all contribute to variations in the distinguished extract 48 .The primary mechanisms behind the antioxidant effect of phenolic compounds are their redox properties, which can help trap and eliminate free radicals, quench singlet and triplet oxygen, and dissolve peroxides 40 .In addition, there may be differences in the plant's geographical distribution, the extraction technique, the solvent employed, the time of plant seed harvesting, and other environmental variables contributing to the dispute 49 .Plants that are major antioxidants or scavengers of free radicals correlate with phenolic chemicals 50 [50].According to the study's findings, the plant extracts' higher phenolic content and/or specific kind of phenolic content may have contributed to their potent radical scavenging action.The capacity of phenolic compounds to attract metals, suppress lipoxygenase, and scavenging free radicals may be linked to their bioactivity.The extraction process and solvent type may be the cause of discrepancies between various solvents 41 .Flavonoids, which are present in herbs, have been shown in several studies to have a substantial role in their antioxidant properties 51 .The majority of oxidizing substances, including single oxygen and other free radicals, may be effectively scavenged by flavonoids 40,52 .A broad class of physiologically active chemicals make up the primary secondary metabolites known as phenolic compounds.Phenolic compounds have redox characteristics that make them reducing and antioxidants.Using the tests for phosphormolybdenum, DPPH, ABTS, FRAP, ferric reducing power, and NO radical scavenging, the antioxidant activity of the plant extract was assessed.There was a substantial correlation seen between the antioxidant capacity of rosemary extracts and the positive control.The existence of several phytochemicals, including phenolic substances and flavonoids, may be the cause of this 52 .It was shown that the total phenolic content of various extracts strongly correlated with their antioxidant activity 40 .As a result, rosemary leaves might be added to meals or used as a supplement to increase caloric intake or prevent oxidation in nutritional goods.In contrast to the positive control and each other, the various extracts' percentage inhibition was lower.The phenomena that have been seen might be explained by the lower concentration or by the specific type of flavonoids and/or phenolic ingredients, which were shown to neutralize radicals such as hydroxyl and superoxide 53 .Flavonoids produced from plants have anti-inflammatory, antibacterial, antidiarrheal, and antioxidant qualities 39 .Flavonoids and polyphenolic chemicals react with the walls of bacterial cells to produce complexes that carry out biological activities 54 .Furthermore, the chemical makeup and polyphenol concentration of the extract are responsible for its antioxidant potential 55 .The plant extract's ability to eliminate free radicals may be attributed to its secondary metabolites, which include tannin, phenol, flavonoids, alkaloids, and others, which in turn lower the molybdenum ion fraction 55,56 .
Previous reports showed that R. officinalis extracts possess broad-spectrum antibacterial activity against variable bacteria, including E. coli, P. aeruginosa, P. vulgaris, K. pneumoniae, Salmonella sp., S. aureus, Bacillus subtilis, and Listeria monocytogenes [57][58][59] .In this study, the antibacterial activity was polarity-dependent, and the activity of the polar extracts was superior.The antibacterial activity of the low-polar extracts and essential oils of rosemary is due to the presence of certain active ingredients such as 1,8-cineol, a-pinene, and camphor, but also to the synergistic effect between these ingredients and others.In contrast, the potency of the bacteriostatic action of rosemary extract is linked to non-volatile extracts that can be extracted using polar solvents such as methanol and ethanol.Nonvolatile compounds such as carnosol, rosmarinic acid, carnosic acid, rosmarinones A and B, miltionone I, atriplicone B, 3-epimaslinic acid, 2a-hydroxymicromeric acid, 2a, 3a-dihydroxyurs-12-en-28-oic, and corosolic acid acid have been identified in rosemary polar extracts with antibacterial activity [60][61][62] .

cOnclusiOn
The results of our investigation demonstrated that the kind of solvents had a significant impact on the extractability of bioactive ingredients.Overall, the intermediate polar solvent that was used (ethanol) produced the largest concentrations of phytochemicals (phenolic compounds, and flavonoids) as well as the strongest antioxidant activity.and the highest amounts of tannin were obtained with the intermediate polar solvent (methanol).The polar, as well as intermediate polar solvents, produced the strongest antioxidant activity and antibacterial activity; this may be related to the quantity, kind, and polarity of the extracted compounds-which are certainly phenolic acids.Notably, antioxidant activity (as measured by DPPH, ABTS, FRAP tests, ferric reducing power, total antioxidant activity, and nitric oxide radical scavenging) was extremely substantially linked with TPC, TFC, and TTC., this is because the majority of bioactive substances, such as flavonoids polyphenols, and tannins, occur in greater polar extractions.which makes these phytochemicals the major contributor to its antioxidant properties.

acknOwledgMent
The author thanks Dr. Haitham N. Qaralleh, and Dr. Muhamad O. Al-Limoun for providing facilities to use the microbiology lab and helping with antibacterial assays.

table 1 .
Phytochemical content in different solvent extractions, values are the mean of three replicates ± standard deviation (n=3)

table 2 .
The phytochemical content of rosemary essential oil analysis via

table 4 .
Inhibition zone of rosemary extracts