Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Seismic capacity of brick masonry walls externally bonded GFRP under in-plane loading

  • Wang, Quanfeng (Xiamen Institute of Technology, Huaqiao University) ;
  • Chai, Zhenling (College of Civil Engineering, Huaqiao University) ;
  • Wang, Lingyun (College of Urban Construction and Safety Engineering, Shanghai Institute of Technology)
  • Received : 2010.02.20
  • Accepted : 2014.04.21
  • Published : 2014.08.10
⟨ Previous Next ⟩

Abstract

By carrying out the experiment of eight pieces of brick masonry walls with pilaster strengthened by Glass fiber reinforced polymer (GFRP) and one piece of normal masonry wall with pilaster under low reversed cyclic loading, the failure characteristic of every wall is explained; Seismic performances such as hysteresis, stiffness and its degeneration, deformation, energy consumption and influence of some measures including strengthening means, reinforcement area proportion between GFRP and wall surface, "through-wall" anchor on reinforcement effects are studied. The test results showed that strengthening modes have little influence on stiffness, stiffness degeneration and deformation of the wall, but it is another thing for energy consumption of the wall; The ultimate load, deformation and energy consumption of the walls reinforced by glass fiber sheets was increased remarkably, rigidity and its degeneration was slower; Seismic performance of the wall which considers strengthening means, reinforcement area proportion between GFRP and wall surface, "through-wall" anchor at the same time is better than under the other conditions.

Keywords

References

  1. Cecchi, A., Milani, G. and Tralli, A. (2004), "In-plane loaded CFRP reinforced masonry walls: mechanical characteristics by homogenization procedures", J. Compos. Sci. Technol., 64, 2097-2112 https://doi.org/10.1016/j.compscitech.2004.03.009
  2. Croci, G.D., Ayala, D.D., Asdia, P. and Palombini, F. (1987), "Analysis on shear walls reinforced with fibre", IABSE Symp. on Safety and Quality Assurance of Civ. Engrg. Struct., Ind. Assoc. for Bridge and Struct. Engrg., Lisbon, Portugal.
  3. China Academy of Building Research (1997), Specificating of Testing Methods for Earthquake Resisitance Building (JGJ101-96), China Architecture & Building Press, Beijing, China. (in Chinese)
  4. Ehsani, M.R. (1995), "Strengthening of earthquake-damaged masonry structures with composite material", Non-Metallic (FRP) Reinforcement for Concrete Structures, Ed. Taerwe, L., 680-687.
  5. M.R., Saadatmanesh, H. and AI-Saidy, A. (1997), "Shear behavior of URM retrofitted with FRP overlays", J. Compos. Constr., ASCE, 1(2), 17-25. https://doi.org/10.1061/(ASCE)1090-0268(1997)1:1(17)
  6. El-Dakhakhni, W.W., Hamid, A.A. and Elgaaly, M. (2004), "Seismic retrofit of concrete-masonry-infilled steel frames with glass fiber-reinforced polymer laminates", J. Struct. Eng., ASCE, 130(9), 1343-1352 https://doi.org/10.1061/(ASCE)0733-9445(2004)130:9(1343)
  7. ElGawady, M., Hegner, J., Lestuzzi, P. and Badoux, M. (2004), "Static cyclic tests on URM wall before and after retrofitting with composites", Proceedings of the 13th International Brick and Block Masonry Conference, Amsterdam.
  8. ElGawady, M., Lestuzzi, P. and Badoux, M. (2003), "Dynamic in-plane tests on URM", Response of Structures to Extreme Loadings XL 2003, Toronto, Canada, August.
  9. Grande, E., Imbimbo, M. and Sacco, E. (2011), "Simple model for bond behavior of masonry elements strengthened with FRP", J. Compos. Constr., 15(3), 354-363. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000170
  10. Hamid, A.A., El-Dakhakhni, W.W., Hakam, Z.H.R. and Elgaaly, M. (2005), "Behavior of composite unreinforced masonry-fiber-reinforced polymer wall assemblages under in-plane loading", J. Compos. Constr., ASCE, 9(1), 73-83. https://doi.org/10.1061/(ASCE)1090-0268(2005)9:1(73)
  11. Li, Z.X. (2004), Theory and Technique of Engineering Structure Experiment, Press of Tianjin University, Tianjin. (in Chinese)
  12. Lunn, D.S. and Rizkalla, S.H. (2011), "Strengthening of infill masonry walls with FRP materials", J. Compos. Constr., ASCE, 15(2), 206-214. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000088
  13. Moghaddam, H.A. (2004), "Lateral load behavior of masonry infilled steel frames with repair and retrofit", J. Struct. Eng., ASCE, 130(1), 56-63. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:1(56)
  14. Rosenboom, O.A. and Kowalsky, M.J. (2004), "Reversed in-plane cyclic behavior of posttensioned clay brick masonry walls", J. Struct. Eng., ASCE, 130(5), 787-798. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:5(787)
  15. Prota, A., Manfredi, G. and Nardone, F. ( 2008), "Assessment of design formulas for in-plane FRP strengthening of masonry walls", J. Compos. Constr., ASCE, 12(6), 643-649. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:6(643)
  16. Saadatmanesh, H. (1994), "Fiber composites for new and existing structures", ACI Struct. J., 91(3), 346-354.
  17. Schwegler, G. (1994a), "Strengthening of masonry with fiber composites", PhD Thesis, Federal Institute of Technology, Zurich, Switzerland. (in German)
  18. Schwegler, G. (1994b), "Masonry construction strengthened with fiber composites in seismically endangered zones", Proc. 10th Europ. Conf. on Earthquake Eng., The Netherlands, 454-458.
  19. Sweidan, R.I. (1991), "The application of fiber reinforced plastics to the strengthening of masonry structures", MS Thesis, Dept. of Civ. and Envir. Engrg., Massachusetts Institute of Technology, Cambridge, Mass.
  20. Stratford, T., Pascale, G.., Manfroni, O. and Bonfiglioli, B. (2004), "Shear strengthening masonry panels with sheet glass-fiber reinforced polymer", J. Compos. Constr., ASCE, 8(5), 434-443. https://doi.org/10.1061/(ASCE)1090-0268(2004)8:5(434)
  21. Trade Criterion the People's Republic of China (1997), Specificating of Testing Methods for Earthquake Resistant Building, (JGJ101-96), Press of Industry of Architecture of China, Beijing. (in Chinese)
  22. Triantafillou, T.C. (1998), "Strengthening of masonry structures using epoxy-bonded FRP laminates", J. Compo. Constr., 2(2), 96-104. https://doi.org/10.1061/(ASCE)1090-0268(1998)2:2(96)
  23. Valluzzi, M.R., Tinazzi, D. and Modena, C. (2002), "Shear behavior of masonry panels strengthened by FRP laminates", J. Construct. Build. Mater., 164, 09-416
  24. Wang, L., Wang, T. and Chen, Q. (2003), "Experimental study on performance of concrete-filled rectangular tubular frame under low-reversed cyclic loading", J. Earthq. Eng. Eng. Vib., 23(3), 115-117. (in Chinese)
  25. Wang, T. (2003), Structural Experiment of Civil Engineering, Press of Wuhan University of Technology, Wuhan. (in Chinese)
  26. Wang, Y., Ai, J., Zhang, C. and Lu, Z. (2003), "Experimental research on prestressing concrete-masonry wall under low cycle load", J. Arch. Struct., 22-26. (in Chinese)
  27. Zhu, B. (1989), Structural Seismic Experiment, Press of Seismology, Beijing. (in Chinese)

Cited by

  1. Numerical modeling of the aging effects of RC shear walls strengthened by CFRP plates: A comparison of results from different "code type" models vol.19, pp.5, 2014, https://doi.org/10.12989/cac.2017.19.5.579
  2. Seismic performance of retrofitted URM walls with diagonal and vertical steel strips vol.14, pp.5, 2018, https://doi.org/10.12989/eas.2018.14.5.449
  3. In-plane shear behavior of masonry walls strengthened with steel fiber-reinforced concrete overlay vol.19, pp.5, 2014, https://doi.org/10.1007/s42107-018-0041-4