Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Experimental study on the cyclic behaviour of bolted end-plate joints

  • Adany, Sandor (Department of Structural Mechanics, Budapest University of Technology and Economics) ;
  • Calado, Luis (DECivil, Instituto Superior Tecnico) ;
  • Dunai, Laszlo (Department of Steel Structures, Budapest University of Technology and Economics)
  • Published : 2001.03.25
⟨ Previous Next ⟩

Abstract

In this paper an experimental study is performed on end-plate type joints. The test arrangement represents a column-base joint of a steel frame. Altogether six specimens were tested, each of them subjected to cyclic loading. The specimens were carefully designed by performing detailed preliminary calculations so that they would present typical behaviour types of end-plate joints. On the basis of the experimentally established moment-rotation relationship, the cyclic characteristics of each specimen have been calculated and compared to one another. The results are evaluated, qualitative and quantitative conclusions are drawn.

Keywords

References

  1. Adany, S. and Dunai, L. (1995), "Rigidity of column-base connections under combined loading", International Colloquium on Stability of Steel Structures, September 21-23, Budapest, Hungary, Preliminary Report, II, 3-10.
  2. Adany, S. and Dunai, L. (1997), "Modelling of steel-to-concrete end-plate connections under monotonic and cyclic loading", Periodica Politechnica ser. Civil Eng., 41(1), 3-16, 1997.
  3. Ballio, G., Calado, L. and Castiglioni, C. A. (1997), "Low cycle fatigue behaviour of structural steel members and connections", Fatigue & Fracture of Engineering Materials & Structures, 20(8), 1129-1146. https://doi.org/10.1111/j.1460-2695.1997.tb00318.x
  4. Calado, L., Bernuzzi, C. and Castiglioni, C. A. (1998), "Structural steel components under low-cycle fatigue: design assisted by testing", Structural Engineering World Congress, SEWC'98, San Francisco, Paper $n^{\circ}$ T196-4.
  5. Calado, L. and Lamas, A. (1998), "Seismic modelling and behaviour of steel beam-to-column connections", Second World Conference on Steel Construction, San Sebastian, Spain.
  6. Calado, L. and Mele, E. (1999), "Experimental research program on steel beam-to-column connections", Report ICIST, DT 1/99.
  7. Calado, L., Mele, E. and De Luca, A. (1999), "Cyclic behaviour of steel semirigid beam-to-column connections", to be published in ASCE.
  8. Dunai, L. (1992), "Modelling of cyclic behaviour of steel semi-rigid connection", First State-of-the-Art Workshop on Semi-Rigid Behaviour of Civil Engineering Structural Connections: COST C1, Brussels, 394-405.
  9. Dunai, L., Adany, S. and Fukumoto, Y. (1995), "Moment-rotation model of steel-to-concrete end-plate connections", Third International Workshop on Connections in Steel Structures, 29 May - 1 June, Trento, Italy, Connections in Steel Structures III, ed. R. Bjorhovde, A. Colson and R. Zandonini, 269-277.
  10. Dunai, L., Fukumoto, Y. and Ohtani, Y. (1996), "Behaviour of steel-to-concrete connections under combined axial force and cyclic bending", Journal of Constructional Steel Research, 36(2), 121-147. https://doi.org/10.1016/0143-974X(95)00005-G
  11. Dunai, L. and Adany, S. (1997), "Cyclic deterioration model for steel-to-concrete joints", Second International Conference on the Behaviour of Steel Structures in Seismic Areas (STESSA '97), August 3-8, Kyoto, Japan, ed. F. M. Mazzolani, H. Akiyama, 564-571.
  12. ECCS (1986), "Recommended testing procedure for assessing the behaviour of structural steel elements under cyclic loads", Technical Committee 1, TWG 1.3, 45.
  13. Eurocode 3 (1993), "Design rules for steel structures, part 1, general rules and rules for buildings", ENV 1993-1-1.
  14. Ferreira, J. (1994), "Characterisation of the behaviour of semi-rigid steel connections", MSc Thesis, Instituto Superior Tecnico, Lisbon, Portugal (in portuguese).
  15. Wald, F. (1994), "Connection design tables to ENV 1993-1-1 (Eurocode 3)", ed: Wald, F., Prague.

Cited by

  1. Test of Void-Filled SHS Beams Under Cyclic Loading vol.29, pp.10, 2010, https://doi.org/10.1177/0731684408100896
  2. Effects of inclination angle on buckling of continuous composite bridges with inclined parabolic arch ribs vol.16, pp.2, 2016, https://doi.org/10.1007/s13296-016-6009-x
  3. Monotonic Loading Tests on Semi-Rigid End-Plate Connections with Welded I-Shaped Columns and Beams vol.13, pp.2, 2010, https://doi.org/10.1260/1369-4332.13.2.215
  4. Behaviour of concrete filled-steel tubes under axial load vol.169, pp.3, 2016, https://doi.org/10.1680/jstbu.14.00125
  5. Experimental study on standard and innovative bolted end-plate beam-to-beam joints under bending vol.18, pp.6, 2015, https://doi.org/10.12989/scs.2015.18.6.1423
  6. Hysteretic behaviour of dissipative bolted fuses for earthquake resistant steel frames vol.85, 2013, https://doi.org/10.1016/j.jcsr.2013.02.016
  7. Hysteretic behavior of dissipative welded fuses for earthquake resistant composite steel and concrete frames vol.14, pp.6, 2013, https://doi.org/10.12989/scs.2013.14.6.547
  8. Damage Assessment of Rectangular Concrete-Filled Steel Tubes for Performance-Based Design vol.20, pp.4, 2001, https://doi.org/10.1193/1.1809660
  9. A review and analysis of circular UHPC filled steel tube columns under axial loading vol.62, pp.4, 2017, https://doi.org/10.12989/sem.2017.62.4.417
  10. Assessment of stress-strain model for UHPC confined by steel tube stub columns vol.63, pp.3, 2001, https://doi.org/10.12989/sem.2017.63.3.371
  11. Seismic Performance of Full-Scale Joints Composed by Concrete-Filled Steel Tube Column and Reinforced Concrete Beam with Steel Plate-Stud Connections vol.2019, pp.None, 2001, https://doi.org/10.1155/2019/5476909
  12. Research on Dynamic Response of Concrete-Filled Steel Tube Columns Confined with FRP under Blast Loading vol.2019, pp.None, 2019, https://doi.org/10.1155/2019/8692310